The DOI matches its Crossref record.
Combustion Mechanism of Azide Polymer
Abstract
The combustion wave structure and thermal decomposition process of azide polymer were studied to determine the parameters which control the burning rate. The azide polymer studied was glycidyl azide polymer (GAP) which contains energetic – N 3 groups. GAP was cured with hexamethylene diisocyanate (HMDI) and crosslinked with trimethylolpropane (TMP) to formulate GAP propellant. From the experiments, it was found that the burning rate of GAP propellant is significantly high even though the adiabatic flame temperature of GAP propellant is lower than that of conventional solid propellants. The energy released at the burning surface of GAP propellant is caused by the scission of NN 2 bond which produces gaseous N 2. The heat flux transferred back from the gas phase to the burning surface is very small compared with the heat generated at the burning surface. The activation energy of the decomposition of the burning surface of GAP propellant, E s, is determined to be 87 kJ/mol. The burning rate is represented by r = 9.16 × 10 3 exp(–E s/RT s) where r (m/s) is burning rate, T s (K) is the burning surface temperature, and R is the universal gas constant. The observed high temperature sensitivity of burning rate is correlated to the relationship of (∂T s/∂T 0)p = 0.481 at 5 MPa, where T 0 is the initial propellant temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 9
- N.Kubota T.Sonobe A.Yamamoto andH.Shimizu “Burning Rate Characteristics of GAP Propellants” AIAA‐Paper No.88–3251(1988). · doi:10.2514/6.1988-3251
- A. M.Helmy “GAP Propellant for Gas Generator Application” AIAA Paper No.87–1725(1987). · doi:10.2514/6.1987-1725
- Pauling L., 1960, The Nature of the Chemical Bond, 85
- N.Kubota T. J.Ohlemiller L. H.Caveny andM.Summerfield “The Mechanism of Super‐Rate Burning of Catalyzed Double Base Propellants” Report No. AMS 1087 Department of Aerospace and Mechanical Sciences Princeton University March 1973 or AD‐763786. · doi:10.21236/ad0763786
- N.KubotaandA.Ishihara Twentieth Symposium (International) on Combustion The Combustion Institute 1984. [Proc.] p.2035. · doi:10.1016/s0082-0784(85)80704-9
- 10.6028/jres.057.026 · DOI · Paper page
- 10.1021/ac60131a045 · DOI · Paper page
- 10.1021/ba-1969-0088.ch009 · doi:10.1021/ba-1969-0088.ch009
- 10.1063/1.1730226 · DOI
Cited by
Solid Propellant Chemistry, Combustion, and Motor Interior Ballistics
(2000) · American Institute of Aeronautics and Astronautics eBooks · doi:10.2514/4.866562 · Cited by 361
Sood, R., Donnadio, A., Giancola, S., Kreisz, A., Jones, D. J., & Cavaliere, S. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b02713 · Cited by 59
Metadata
- Authors
- Kubota, N., & Sonobe, T.
- Venue
- Propellants, Explosives, Pyrotechnics
- Publisher
- Wiley
- Published
- 1988-12
- Volume
- 13
- Issue
- 6
- Pages
- 172-177
- ISSN
- 0721-3115 (ISSN-L)
- 1521-4087
- OpenAlex
- W2093877333
- Cited by
- 162
- References
- 0
- FWCI
- 5.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Combustion Mechanism of Azide Polymer. https://app.cochat.ai/papers/10.1002/prep.19880130604
- The paper
- Kubota, N., & Sonobe, T. (1988). Combustion Mechanism of Azide Polymer. Propellants, Explosives, Pyrotechnics. https://doi.org/10.1002/prep.19880130604
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.