Space shuttle testing of the TriDAR 3D rendezvous and docking sensor
The DOI matches its Crossref record.
Abstract
This paper presents results from the first two Space Shuttle test flights of the TriDAR vision system. TriDAR was developed as a proximity operations sensor for autonomous rendezvous and docking (AR&D) missions to noncooperative targets in space. The system does not require the use of cooperative markers, such as retro‐reflectors, on the target spacecraft. TriDAR includes a hybrid three‐dimensional (3D) sensor along with embedded model based tracking algorithms to provide six‐degree‐of‐freedom (6 DOF) relative pose information in real time. A thermal imager is also included to provide range and bearing information for far‐range rendezvous operations. In partnership with the Canadian Space Agency (CSA) and NASA, Neptec has space‐qualified the TriDAR vision system and integrated it on board Space Shuttle Discovery to fly as a detailed test objective (DTO) on the STS‐128 and STS‐131 missions to the International Space Station (ISS). The objective of the TriDAR DTO missions was to demonstrate the system's ability to perform acquisition and tracking of a known target in space autonomously and provide real‐time relative navigation cues. Knowledge (reference 3D model) about the target can be obtained on the ground or in orbit. Autonomous operations involved automatic acquisition of the ISS and real‐time tracking, as well as detection and recovery from system malfunctions and/or loss of tracking. © 2012 Wiley Periodicals, Inc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Satellite Pose Estimation with Deep Landmark Regression and Nonlinear Pose Refinement
Chen, B., Cao, J., Parra, A., & Chin, T.-J. (2019) · 2019 IEEE/CVF International Conference on Computer Vision Workshop (ICCVW) · doi:10.1109/iccvw.2019.00343 · Cited by 203
Robotics and AI-Enabled On-Orbit Operations With Future Generation of Small Satellites
Nanjangud, A., Blacker, P. C., Bandyopadhyay, S., & Gao, Y. (2018) · Proceedings of the IEEE · doi:10.1109/jproc.2018.2794829 · Cited by 67
Huo, Y., Li, Z., & Zhang, F. (2020) · IEEE Access · doi:10.1109/access.2020.3041415 · Cited by 44
“The main solution is to estimate the pose of the spacecraft through monocular cameras, stereo cameras, RGB-D images or data with depth information such as point clouds obtained by LiDAR [1], [2].”
BackgroundUncooperative Spacecraft Pose Estimation Using an Infrared Camera During Proximity Operations
Shi, J.-F., Ulrich, S., Ruel, S., & Anctil, M. (2015) · AIAA SPACE 2015 Conference and Exposition · doi:10.2514/6.2015-4429 · Cited by 17
Self-citation
Metadata
- Authors
- Ruel, S., Luu, T., & Berube, A.
- Venue
- Journal of Field Robotics
- Publisher
- Wiley
- Published
- 2012-01-03
- Volume
- 29
- Issue
- 4
- Pages
- 535-553
- ISSN
- 1556-4959 (ISSN-L)
- 1556-4967
- OpenAlex
- W2161958083
- Cited by
- 67
- References
- 0
- FWCI
- 7.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Space shuttle testing of the TriDAR 3D rendezvous and docking sensor. https://app.cochat.ai/papers/10.1002/rob.20420
- The paper
- Ruel, S., Luu, T., & Berube, A. (2012). Space shuttle testing of the TriDAR 3D rendezvous and docking sensor. Journal of Field Robotics. https://doi.org/10.1002/rob.20420
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.