The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Surface photovoltage spectroscopy of semiconductor structures: at the crossroads of physics, chemistry and electrical engineering
Abstract
The possibility of obtaining a detailed picture of the electronic structure makes surface photovoltage spectroscopy (SPS) eminently suitable for bridging the gap between the chemical, physical, optical and electrical properties of semiconductors. In SPS, changes in band bending (both at the free semiconductor surface and at buried interfaces) are monitored as a function of external illumination. Surface photovoltage spectroscopy can provide detailed, quantitative information on bulk properties (e.g. bandgap and type, carrier diffusion length and lifetime) and can be used for complete construction of surface and interface band diagrams, including the measurement of energy levels in quantum structures. A particular strength is that a comprehensive analysis of surface and bulk defect state distributions and properties is made possible. Measurements using SPS are contactless and non‐destructive. In addition, they can be performed both in situ and ex situ , at any reasonable temperature, on any semiconducting material, at any ambient and at any lateral resolution down to the atomic scale. This review starts with an overview of SPS‐related surface and interface theory, describes the SPS experimental set‐up and presents applications for surface and interface characterization of a wide variety of materials and structures, cross‐correlating them with other methodologies. Copyright © 2001 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The physics of semiconductor devices
Grubin, H. (1979) · IEEE Journal of Quantum Electronics · doi:10.1109/jqe.1979.1069942 · Cited by 2,753
Surface photovoltage phenomena: theory, experiment, and applications
Kronik, L. (1999) · Surface Science Reports · doi:10.1016/s0167-5729(99)00002-3 · Cited by 1,648
Self-citationPhysics of semiconductor devices /2nd edition/
Sze, S. M. (1981) · New York eBooks · Cited by 1,599
Semiconductor Surfaces and Interfaces
Mönch, W. (1993) · Springer Series in Surface Sciences · doi:10.1007/978-3-662-02882-7 · Cited by 1,014
Surface Properties of Germanium
Brattain, W. H., & Bardeen, J. (1953) · Bell System Technical Journal · doi:10.1002/j.1538-7305.1953.tb01420.x · Cited by 601
Physics of Semiconductor Devices (2nd edn)
Dobson, P. J. (1982) · Physics Bulletin · doi:10.1088/0031-9112/33/4/035 · Cited by 247
Cited by
Advances in the Casimir Effect
Bordag, M., Klimchitskaya, G. L., Mohideen, U., & Mostepanenko, V. M. (2009) · doi:10.1093/acprof:oso/9780199238743.001.0001 · Cited by 1,284
Li, H., Qin, F., Yang, Z., Cui, X., Wang, J., & Zhang, L. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b12850 · Cited by 861
Zhang, W., Pathak, S., Sakai, N., Stergiopoulos, T., Nayak, P. K., Noel, N. K., Haghighirad, A. A., Burlakov, V. M., deQuilettes, D. W., Sadhanala, A., et al. (2015) · Nature Communications · doi:10.1038/ncomms10030 · Cited by 766
Photocatalytic water splitting
Nishioka, S., Osterloh, F. E., Wang, X., Mallouk, T. E., & Maeda, K. (2023) · Nature Reviews Methods Primers · doi:10.1038/s43586-023-00226-x · Cited by 604
Metal oxide nanocrystals for gas sensing
Faglia, G., Baratto, C., Comini, E., Sberveglieri, G., Zha, M., & Zappettini, A. (2006) · Proceedings of IEEE Sensors, 2004. · doi:10.1109/icsens.2004.1426130 · Cited by 603
Metadata
- Authors
- Kronik, L., & Shapira, Y.
- Venue
- Surface and Interface Analysis
- Publisher
- Wiley
- Published
- 2001-10
- Volume
- 31
- Issue
- 10
- Pages
- 954-965
- ISSN
- 0142-2421 (ISSN-L)
- 1096-9918
- OpenAlex
- W1974291463
- Cited by
- 355
- References
- 6
- FWCI
- 2.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.