The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Quantitative electron spectroscopy of surfaces: A standard data base for electron inelastic mean free paths in solids
Abstract
A compilation is presented of all published measurements of electron inelastic mean free path lengths in solids for energies in the range 0–10 000 eV above the Fermi level. For analysis, the materials are grouped under one of the headings: element, inorganic compound, organic compound and adsorbed gas, with the path lengths each time expressed in nanometers, monolayers and milligrams per square metre. The path lengths are vary high at low energies, fall to 0.1–0.8 nm for energies in the range 30–100 eV and then rise again as the energy increases further. For elements and inorganic compounds the scatter about a ‘universal curve’ is least when the path lengths are expressed in monolayers, λ m . Analysis of the inter‐element and inter‐compound effects shows that λ m is related to atom size and the most accuratae relations are λ m = 538 E −2 +0.41( aE ) 1/2 for elements and λ m =2170 E −2 +0.72( aE ) 1/2 for inorganic compounds, where a is the monolayer thickness (nm) and E is the electron energy above the Fermi level in eV. For organic compounds λ d =49 E −2 +0.11 E 1/2 mgm −2 . Published general theoretical predictions for λ, valid above 150 eV, do not show as good correlations with the experimental data as the above relations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Handbook of Auger electron spectroscopy
Sekine, T. (1982) · Medical Entomology and Zoology · Cited by 2,183
Tables of Physical and Chemical Constants
(1997) · Zeitschrift für Kristallographie - Crystalline Materials · doi:10.1524/zkri.1997.212.5.400 · Cited by 955
Quantitative chemical analysis by ESCA
Penn, D. R. (1976) · Journal of Electron Spectroscopy and Related Phenomena · doi:10.1016/0368-2048(76)85004-9 · Cited by 924
Attenuation lengths of low-energy electrons in solids
Powell, C. J. (1974) · Surface Science · doi:10.1016/0039-6028(74)90091-0 · Cited by 734
Range of Excited Electrons in Metals
Quinn, J. J. (1962) · Physical Review · doi:10.1103/physrev.126.1453 · Cited by 648
Secondary Electron Emission from Solids
Hachenberg, O., & Brauer, W. (1959) · Advances in electronics and electron physics · doi:10.1016/s0065-2539(08)60999-3 · Cited by 267
Photoelectron determination of the attenuation of low-energy electrons in Al2 O3
Battye, F. L., Jenkin, J. G., Liesegang, J., & Leckey, R. C. G. (1974) · Physical review. B, Solid state · doi:10.1103/physrevb.9.2887 · Cited by 67
Cited by
Angle-resolved photoemission studies of the cuprate superconductors
Damascelli, A., Hussain, Z., & Shen, Z.-X. (2003) · Reviews of Modern Physics · doi:10.1103/revmodphys.75.473 · Cited by 3,775
“As the photoelectron mean free path increases from approximately 5 to almost 20 Å when the photon energy is increased from 120 to 880 eV (Seah and Dench, 1979), it was concluded that the 4d-4f spectra mainly reflect the surface 4f electronic states.”
BackgroundPlasmon-induced hot carrier science and technology
Brongersma, M. L., Halas, N. J., & Nordlander, P. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2014.311 · Cited by 3,528
Theoretical approaches to x-ray absorption fine structure
Rehr, J. J., & Albers, R. C. (2000) · Reviews of Modern Physics · doi:10.1103/revmodphys.72.621 · Cited by 3,301
Tanuma, S., Powell, C. J., & Penn, D. R. (1994) · Surface and Interface Analysis · doi:10.1002/sia.740210302 · Cited by 2,753
Radiation damage in the TEM and SEM
Egerton, R. F., Li, P., & Malac, M. (2004) · Micron · doi:10.1016/j.micron.2004.02.003 · Cited by 2,128
Metadata
- Authors
- Seah, M. P., & Dench, W. A.
- Venue
- Surface and Interface Analysis
- Publisher
- Wiley
- Published
- 1979-02
- Volume
- 1
- Issue
- 1
- Pages
- 2-11
- ISSN
- 0142-2421 (ISSN-L)
- 1096-9918
- OpenAlex
- W2106603672
- Cited by
- 5,349
- References
- 7
- FWCI
- 38.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.