Highly Lithium Adsorption Capacities of H 1.6 Mn 1.6 O 4 Ion‐Sieve by Ordered Array Structure
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Spinel‐structured Li 1.6 Mn 1.6 O 4 (LMO) has received wide attention as ion sieve for the recovery of lithium from aqueous lithium resources. In this work, the branched‐like LMO particles were prepared via calcinating orthorhombic LiMnO 2 . After extracting of Li + in hydrochloric acid, the branched‐like H 1.6 Mn 1.6 O 4 (HMO) was obtained. During the preparing process, the structure, morphologies of LMO and HMO were characterized by XRD and SEM. The results indicated that HMO maintained the spinel and ordered array structure, which was beneficial to the lithium uptake behavior. Compared to normal HMO nanoparticles, the Li + adsorption capacity of HMO by order array branched‐like structure can reach to 43.8 mg/g while rod‐like was 35 mg/g (C Li : 150 mg/L, pH 11, T: 25°C). The adsorption behaviors were well simulated by the pseudo‐second‐order and the Langmuir models. The reusability of the HMO implies that the branched‐like HMO is a potential adsorbent for Li + recovery from aqueous lithium resources.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chitrakar, R., Kanoh, H., Miyai, Y., & Ooi, K. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie000911h · Cited by 340
Synthesis and Adsorption Properties of Li1.6Mn1.6O4 Spinel
Xiao, J.-L., Sun, S.-Y., Wang, J., Li, P., & Yu, J.-G. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie400691d · Cited by 115
Abe, M., & Chitrakar, R. (1987) · Hydrometallurgy · doi:10.1016/0304-386x(87)90045-4 · Cited by 62
Cited by
Environmental impact of direct lithium extraction from brines
Vera, M. L., Torres, W. R., Galli, C. I., Chagnes, A., & Flexer, V. (2023) · Nature Reviews Earth & Environment · doi:10.1038/s43017-022-00387-5 · Cited by 766
Direct lithium extraction: A new paradigm for lithium production and resource utilization
Farahbakhsh, J., Arshadi, F., Mofidi, Z., Mohseni-Dargah, M., Kök, C., Assefi, M., Soozanipour, A., Zargar, M., Asadnia, M., Boroumand, Y., et al. (2024) · Desalination · doi:10.1016/j.desal.2023.117249 · Cited by 260
Reich, R., Slunitschek, K., Danisi, R. M., Eiche, E., & Kolb, J. (2023) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827508.2022.2047041 · Cited by 120
Al-doped H 2 TiO 3 ion sieve with enhanced Li + adsorption performance
Dai, X., Zhan, H., Qian, Z., Li, J., Liu, Z., & Wu, Z. (2021) · RSC Advances · doi:10.1039/d1ra06535a · Cited by 66
Self-citationZhao, B., Guo, M., Qian, F., Qian, Z., Xu, N., Wu, Z., & Liu, Z. (2020) · RSC Advances · doi:10.1039/d0ra05094f · Cited by 39
Self-citation
Metadata
- Authors
- Qian, F., Guo, M., Qian, Z., Li, Q., Wu, Z., & Liu, Z.
- Venue
- ChemistrySelect
- Publisher
- Wiley
- Published
- 2019-09-12
- Volume
- 4
- Issue
- 34
- Pages
- 10157-10163
- ISSN
- 2365-6549 (ISSN-L)
- OpenAlex
- W2972647669
- Cited by
- 44
- References
- 3
- FWCI
- 2.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.