The DOI matches its Crossref record.
Thermal Response of Transparent Silver Nanowire/PEDOT:PSS Film Heaters
Abstract
Thermal response behavior of transparent silver nanowire/PEDOT:PSS film heaters are intensively studied for manipulating heating temperature, response time, and power consumption. Influences of substrate heat capacity, heat transfer coefficient between air and heater, sheet resistance and dimension of Ag nanowire film, on the thermal response are investigated from thermodynamic analysis. Suggestion is given for practical applications that if other parameters are fixed, Ag nanowire coverage can be utilized as an effective parameter to adjust the thermal response. The heat transfer coefficient plays opposite roles on thermal response speed and achievable steady temperature. A value of ≈32 W m−2 K−1 is obtained from transient process analysis after correcting it by considering heater resistance variation during heating tests. Guidance of designing heaters with a given response time is provided by forming Ag nanowire film with a suitable sheet resistance on substrate of appropriate material and a certain thickness. Thermal response tests of designed Ag heaters are performed to show higher heating temperature, shorter response time, and lower power consumption (179 °C cm 2 W−1) than ITO/FTO heaters, as well as homogeneous temperature distribution and stability for repeated use. Potential applications of the Ag heaters in window defogging, sensing and thermochromism are manifested.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Li, M., Magdassi, S., Gao, Y., & Long, Y. (2017) · Small · doi:10.1002/smll.201701147 · Cited by 379
Gupta, R., Rao, K. D. M., Kiruthika, S., & Kulkarni, G. U. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11026 · Cited by 256
Soft electrothermal actuators using silver nanowire heaters
Yao, S., Cui, J., Cui, Z., & Zhu, Y. (2017) · Nanoscale · doi:10.1039/c6nr09270e · Cited by 174
Jang, N.-S., Kim, K.-H., Ha, S.-H., Jung, S.-H., Lee, H. M., & Kim, J.-M. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03474 · Cited by 159
Metadata
- Authors
- Ji, S., He, W., Wang, K., Ran, Y., & Ye, C.
- Venue
- Small
- Publisher
- Wiley
- Published
- 2014-07-22
- Volume
- 10
- Issue
- 23
- Pages
- 4951-4960
- ISSN
- 1613-6810 (ISSN-L)
- 1613-6829
- OpenAlex
- W2081617869
- Cited by
- 265
- References
- 0
- FWCI
- 11.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal Response of Transparent Silver Nanowire/PEDOT:PSS Film Heaters. https://app.cochat.ai/papers/10.1002/smll.201401690
- The paper
- Ji, S., He, W., Wang, K., Ran, Y., & Ye, C. (2014). Thermal Response of Transparent Silver Nanowire/PEDOT:PSS Film Heaters. Small. https://doi.org/10.1002/smll.201401690
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.