The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Tailoring the Thermal and Mechanical Properties of Graphene Film by Structural Engineering
Abstract
Due to substantial phonon scattering induced by various structural defects, the in‐plane thermal conductivity (K) of graphene films (GFs) is still inferior to the commercial pyrolytic graphite sheet (PGS). Here, the problem is solved by engineering the structures of GFs in the aspects of grain size, film alignment, and thickness, and interlayer binding energy. The maximum K of GFs reaches to 3200 W m−1 K−1 and outperforms PGS by 60%. The superior K of GFs is strongly related to its large and intact grains, which are over four times larger than the best PGS. The large smooth features about 11 µm and good layer alignment of GFs also benefit on reducing phonon scattering induced by wrinkles/defects. In addition, the presence of substantial turbostratic‐stacking graphene is found up to 37% in thin GFs. The lacking of order in turbostratic‐stacking graphene leads to very weak interlayer binding energy, which can significantly decrease the phonon interfacial scattering. The GFs also demonstrate excellent flexibility and high tensile strength, which is about three times higher than PGS. Therefore, GFs with optimized structures and properties show great potentials in thermal management of form‐factor‐driven electronics and other high‐power‐driven systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal properties of graphene and nanostructured carbon materials
Balandin, A. A. (2011) · Nature Materials · doi:10.1038/nmat3064 · Cited by 6,244
Cited by
Chemical Vapour Deposition of Graphene—Synthesis, Characterisation, and Applications: A Review
Saeed, M., Alshammari, Y., Majeed, S. A., & Al-Nasrallah, E. (2020) · Molecules · doi:10.3390/molecules25173856 · Cited by 459
Thermal conductivity of graphene-based polymer nanocomposites
Huang, X., Zhi, C., Lin, Y., Bao, H., Wu, G., Jiang, P., & Mai, Y.-W. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100577 · Cited by 410
Graphene related materials for thermal management
Fu, Y., Hansson, J., Liu, Y., Chen, S., Zehri, A., Samani, M. K., Wang, N., Ni, Y., Zhang, Y., Zhang, Z.-B., et al. (2020) · 2D Materials · doi:10.1088/2053-1583/ab48d9 · Cited by 301
Self-citationThermal Transport in Conductive Polymer–Based Materials
Xu, X., Zhou, J., & Chen, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904704 · Cited by 224
Self-citation
Metadata
- Authors
- Wang, N., Samani, M. K., Li, H., Dong, L., Zhang, Z., Su, P., Chen, S., Chen, J., Huang, S., Yuan, G., Xu, X., Li, B., Leifer, K., Ye, L., & Liu, J.
- Venue
- Small
- Publisher
- Wiley
- Published
- 2018-06-21
- Volume
- 14
- Issue
- 29
- Pages
- e1801346-e1801346
- ISSN
- 1613-6810 (ISSN-L)
- 1613-6829
- OpenAlex
- W2809301748
- Cited by
- 169
- References
- 1
- FWCI
- 7.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Tailoring the Thermal and Mechanical Properties of Graphene Film by Structural Engineering. https://app.cochat.ai/papers/10.1002/smll.201801346
- The paper
- Wang, N., Samani, M. K., Li, H., Dong, L., Zhang, Z., Su, P., Chen, S., Chen, J., Huang, S., Yuan, G., Xu, X., Li, B., Leifer, K., Ye, L., & Liu, J. (2018). Tailoring the Thermal and Mechanical Properties of Graphene Film by Structural Engineering. Small. https://doi.org/10.1002/smll.201801346
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.