The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
A Freestanding Flexible Single‐Atom Cobalt‐Based Multifunctional Interlayer toward Reversible and Durable Lithium‐Sulfur Batteries
Open accessAbstract
The development of Li‐S batteries is greatly hindered by the polysulfide shuttling and sluggish sulfur redox kinetics, leading to low utilization of active materials and rapid capacity decay. Herein, a freestanding multifunctional interlayer, prepared by layer‐by‐layer assembling of the single‐atom cobalt‐anchored nitrogen‐doped carbon nanosheets (NC@SA‐Co) and dual network of carbon nanotube‐cellulose nanofiber (CNT‐CNF) hybrid, is proposed to effectively enhance the polysulfide immobilization and sulfur redox kinetics. The conductive CNT network acts as the physical barrier to confine the polysulfide diffusion and to facilitate the reuse of polysulfides. The oxygen‐group‐terminated CNF network allows the hopping of Li+ ion and suppresses the polysulfide crossover due to the strong electrostatic repulsion. Moreover, it is demonstrated that the 2D NC@SA‐Co with numerous well‐defined single sites of Co–N 4 can effectively serve as an electrocatalyst to boost the reversible reaction of polysulfides. As a result, the assembled Li‐S batteries with the multifunctional interlayer deliver a high reversible specific capacity of 1160 mAh g−1 at 0.1 C and an ultralow capacity decay of 0.058% per cycle over 700 cycles. Even with a high sulfur loading of 7.2 mg cm−2, a high areal capacity of 8.3 mAh cm−2 can be achieved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Atomic cobalt on nitrogen-doped graphene for hydrogen generation
Fei, H., Dong, J., Arellano-Jiménez, M. J., Ye, G., Dong Kim, N., Samuel, E. L. G., Peng, Z., Zhu, Z., Qin, F., Bao, J., et al. (2015) · Nature Communications · doi:10.1038/ncomms9668 · Cited by 1,621
Qian, Y., Liu, Z., Zhang, H., Wu, P., & Cai, C. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11927 · Cited by 150
Cited by
Single-Atom Catalysts across the Periodic Table
Kaiser, S. K., Chen, Z., Faust Akl, D., Mitchell, S., & Pérez-Ramírez, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00576 · Cited by 1,367
Liang, Z., Shen, J., Xu, X., Li, F., Liu, J., Yuan, B., Yu, Y., & Zhu, M. (2022) · Advanced Materials · doi:10.1002/adma.202200102 · Cited by 464
Sun, X., Qiu, Y., Jiang, B., Chen, Z., Zhao, C., Zhou, H., Yang, L., Fan, L., Zhang, Y., & Zhang, N. (2023) · Nature Communications · doi:10.1038/s41467-022-35736-x · Cited by 378
Self-citationSulfur Reduction Reaction in Lithium–Sulfur Batteries: Mechanisms, Catalysts, and Characterization
Zhou, L., Danilov, D. L., Qiao, F., Wang, J., Li, H., Eichel, R., & Notten, P. H. L. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202202094 · Cited by 343
Self-citationSingle-atom catalysis enables long-life, high-energy lithium-sulfur batteries
Zhuang, Z., Kang, Q., Wang, D., & Li, Y. (2020) · Nano Research · doi:10.1007/s12274-020-2827-4 · Cited by 322
Self-citation
Metadata
- Authors
- Li, Y., Zhou, P., Li, H., Gao, T., Zhou, L., Zhang, Y., Xiao, N., Xia, Z., Wang, L., Zhang, Q., Gu, L., & Guo, S.
- Venue
- Small Methods
- Publisher
- Wiley
- Published
- 2020-01-27
- Volume
- 4
- Issue
- 3
- ISSN
- 2366-9608 (ISSN-L)
- OpenAlex
- W3002184868
- Cited by
- 164
- References
- 2
- FWCI
- 10.21
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.