The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Nonaqueous magnesium electrochemistry and its application in secondary batteries
Abstract
A revolution in modern electronics has led to the miniaturization and evolution of many portable devices, such as cellular telephones and laptop computers, since the 1980s. This has led to an increasing demand for new and compatible energy storage technologies. Furthermore, a growing awareness of pollution issues has provided a strong impetus for the science and technology community to develop alternatives with ever‐higher energy densities, with the ultimate goal of being able to propel electric vehicles. Magnesium's thermodynamic properties make this metal a natural candidate for utilization as an anode in high‐energy‐density, rechargeable battery systems. We report herein on the results of extensive studies on magnesium anodes and magnesium insertion electrodes in nonaqueous electrolyte solutions. Novel, rechargeable nonaqueous magnesium battery systems were developed based on the research. This work had two major challenges: one was to develop electrolyte solutions with especially high anodic stability in which magnesium anodes can function at a high level of cycling efficiency; the other was to develop a cathode that can reversibly intercalate Mg ions in these electrolyte systems. The new magnesium batteries consist of Mg metal anodes, an electrolyte with a general structure of Mg(AlX 3−n R n R′)2 (R′,R = alkyl groups, X = halide) in ethereal solutions (e.g., tetrahydrofuran, polyethers of the “glyme” family), and Chevrel phases of MgMo 3 S 4 stoichiometry as highly reversible cathodes. With their practical energy density expected to be >60 Wh/Kg, the battery systems can be cycled thousands of times with almost no capacity fading. The batteries are an environmentally friendly alternative to lead‐acid and nickel‐cadmium batteries and are composed of abundant, inexpensive, and nonpoisonous materials. The batteries are expected to provide superior results in large devices that require high‐energy density, high cycle life, a high degree of safety, and low‐cost components. Further developments in this field are in active progress. © 2003 The Japan Chemical Journal Forum and Wiley Periodicals, Inc., Chem Rec 3: 61–73; 2003: Published online in Wiley InterScience (www.interscience.wiley.com) DOI 10.1002/tcr.10051
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Insertion Electrode Materials for Rechargeable Lithium Batteries
Winter, M., Besenhard, J. O., Spahr, M. E., & Novák, P. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199807)10:10<725::aid-adma725>3.0.co;2-z · Cited by 2,965
Prototype systems for rechargeable magnesium batteries
Aurbach, D., Lu, Z., Schechter, A., Gofer, Y., Gizbar, H., Turgeman, R., Cohen, Y., Moshkovich, M., & Levi, E. (2000) · Nature · doi:10.1038/35037553 · Cited by 2,355
Self-citationAurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130
Self-citationElectrochemistry and Structural Chemistry of LiNiO2 (R3m) for 4 Volt Secondary Lithium Cells
Ohzuku, T., Ueda, A., & Nagayama, M. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220730 · Cited by 1,384
Advances in Electrochemical Science and Engineering
(1997) · Advances in Electrochemical Sciences and Engineering · doi:10.1002/9783527616794 · Cited by 1,134
(1998) · Wiley eBooks · doi:10.1002/9783527611676 · Cited by 972
Nonaqueous Electrochemistry of Magnesium: Applications to Energy Storage
Gregory, T. D., Hoffman, R. J., & Winterton, R. C. (1990) · Journal of The Electrochemical Society · doi:10.1149/1.2086553 · Cited by 710
Aurbach, D., Levi, M. D., Levi, E., Teller, H., Markovsky, B., Salitra, G., Heider, U., & Heider, L. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838758 · Cited by 654
Self-citationOn the electrochemical behavior of magnesium electrodes in polar aprotic electrolyte solutions
Lu, Z., Schechter, A., Moshkovich, M., & Aurbach, D. (1999) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(99)00146-1 · Cited by 515
Self-citationIntercalated Layered Materials
(1979) · Springer eBooks · doi:10.1007/978-94-009-9415-7 · Cited by 460
Novák, P., Imhof, R., & Haas, O. (1999) · Electrochimica Acta · doi:10.1016/s0013-4686(99)00216-9 · Cited by 371
Aurbach, D., Gizbar, H., Schechter, A., Chusid, O., Gottlieb, H. E., Gofer, Y., & Goldberg, I. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1429925 · Cited by 280
Self-citationElectrochemical Insertion of Magnesium in Metal Oxides and Sulfides from Aprotic Electrolytes
Novák, P., & Desilvestro, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2056075 · Cited by 244
Electrochemical insertion of lithium, sodium, and magnesium in molybdenum(VI) oxide
Spahr, M. E., Novák, P., Haas, O., & Nesper, R. (1995) · Journal of Power Sources · doi:10.1016/0378-7753(94)02099-o · Cited by 182
Intercalation of Polyvalent Cations into V2O5 Aerogels
Le, D. B., Passerini, S., Coustier, F., Guo, J., Soderstrom, T., Owens, B. B., & Smyrl, W. H. (1998) · Chemistry of Materials · doi:10.1021/cm9705101 · Cited by 172
The Study of Reversible Magnesium Deposition by In Situ Scanning Tunneling Microscopy
Aurbach, D., Cohen, Y., & Moshkovich, M. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1379828 · Cited by 158
Self-citationLiebenow, C., Yang, Z. Z., & Lobitz, P. (2000) · Electrochemistry Communications · doi:10.1016/s1388-2481(00)00094-1 · Cited by 145
Levi, E., Gofer, Y., Vestfreed, Y., Lancry, E., & Aurbach, D. (2002) · Chemistry of Materials · doi:10.1021/cm021122o · Cited by 89
Self-citationElectrochemical insertion of magnesium to Mg0.5Ti2(PO4)3
Makino, K., Katayama, Y., Miura, T., & Kishi, T. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00480-3 · Cited by 81
Cohen, Y., & Aurbach, D. (1999) · Review of Scientific Instruments · doi:10.1063/1.1150130 · Cited by 37
Self-citation
Cited by
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Review—SEI: Past, Present and Future
Peled, E., & Menkin, S. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1441707jes · Cited by 2,182
Mg rechargeable batteries: an on-going challenge
Yoo, H. D., Shterenberg, I., Gofer, Y., Gershinsky, G., Pour, N., & Aurbach, D. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40871j · Cited by 1,398
Self-citationQuest for Nonaqueous Multivalent Secondary Batteries: Magnesium and Beyond
Muldoon, J., Bucur, C. B., & Gregory, T. (2014) · Chemical Reviews · doi:10.1021/cr500049y · Cited by 1,376
Placke, T., Kloepsch, R., Dühnen, S., & Winter, M. (2017) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-017-3610-7 · Cited by 1,117
Metadata
- Authors
- Aurbach, D., Weissman, I., Gofer, Y., & Levi, E.
- Venue
- The Chemical Record
- Publisher
- Wiley
- Published
- 2003-01
- Volume
- 3
- Issue
- 1
- Pages
- 61-73
- ISSN
- 1527-8999 (ISSN-L)
- 1528-0691
- OpenAlex
- W1983485843
- Cited by
- 327
- References
- 20
- FWCI
- 1.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.