The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Scalar and Parallel Optimized Implementation of the Direct Simulation Monte Carlo Method
Open accessAbstract
This paper describes a new concept for the implementation of the direct simulation Monte Carlo (DSMC) method. It uses a localized data structure based on a computational cell to achieve high performance, especially on workstation processors, which can also be used in parallel. Since the data structure makes it possible to freely assign any cell to any processor, a domain decomposition can be found with equal calculation load on each processor while maintaining minimal communication among the nodes. Further, the new implementation strictly separates physical modeling, geometrical issues, and organizational tasks to achieve high maintainability and to simplify future enhancements. Three example flow configurations are calculated with the new implementation to demonstrate its generality and performance. They include a flow through a diverging channel using an adapted unstructured triangulated grid, a flow around a planetary probe, and an internal flow in a contactor used in plasma physics. The results are validated either by comparison with results obtained from other simulations or by comparison with experimental data. High performance on an IBM SP2 system is achieved if problem size and number of parallel processors are adapted accordingly. On 400 nodes, DSMC calculations with more than 100 million particles are possible.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bird, G. A. (1976) · Medical Entomology and Zoology · Cited by 1,267
MONTE-CARLO SIMULATION IN AN ENGINEERING CONTEXT
Bird, G. A. (1980) · Progress in Astronautics and Rocketry · Cited by 377
Perception of Numerical Methods in Rarefied Gasdynamics
(1989) · American Institute of Aeronautics and Astronautics eBooks · doi:10.2514/5.9781600865923.0211.0226 · Cited by 134
Cited by
DIRECT SIMULATION MONTE CARLO: Recent Advances and Applications
Oran, E. S., Oh, C. K., & Cybyk, B. Z. (1998) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.30.1.403 · Cited by 413
An open source, parallel DSMC code for rarefied gas flows in arbitrary geometries
Scanlon, T. J., Roohi, E., White, C., Darbandi, M., & Reese, J. M. (2010) · Computers & Fluids · doi:10.1016/j.compfluid.2010.07.014 · Cited by 308
Assessment of gas–surface interaction models for computation of rarefied hypersonic flow
Padilla, J. F., & Boyd, I. D. (2009) · Journal of Thermophysics and Heat Transfer · doi:10.2514/1.36375 · Cited by 102
Self-citation
Metadata
- Authors
- Dietrich, S., & Boyd, I. D.
- Venue
- Journal of Computational Physics
- Publisher
- Elsevier BV
- Published
- 1996-07
- Volume
- 126
- Issue
- 2
- Pages
- 328-342
- ISSN
- 0021-9991 (ISSN-L)
- OpenAlex
- W2021312883
- Cited by
- 289
- References
- 3
- FWCI
- 19.63
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.