Fault Tolerant Flight Control - A Survey
Open accessThe DOI matches its Crossref record; 107 of the 108 references it cites were found in a registry or an index.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Due to the fact that most failures do not occur very often, it is difficult to justify a significant reduction in system failure-free performance just to achieve some insensitivity to a limited failure class.”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [306]
In the citing paper
“an increased robustness to selected faults can be achieved at the expense of reduced system ratings.”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [306]
In the citing paper
“when designing a PFTC system, only selected system failures can be taken into account, usually those that do not have a significant impact on the system operation, because only under such conditions the controller can be resistant to a failure;”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [306]
Citations
Cites
Slotine, J.-J. E., & Li, W. (1991) · CERN Document Server (European Organization for Nuclear Research) · Cited by 18,975
Isidori, A. (1989) · Springer eBooks · doi:10.1007/978-3-662-02581-9 · Cited by 7,869
Åström, K. J., & Wittenmark, B. (1989) · Cited by 5,020
Predictive Control With Constraints
Maciejowski, J. M. (2001) · Cambridge University Engineering Department Publications Database · Cited by 4,368
Self-citationPredictive control with constraints
Camacho, E. F. (2003) · Automatica · doi:10.1016/s0005-1098(03)00056-6 · Cited by 3,530
Diagnosis and Fault-Tolerant Control
Blanke, M., Kinnaert, M., Lunze, J., & Staroswiecki, M. (2003) · Springer eBooks · doi:10.1007/978-3-662-05344-7 · Cited by 2,789
Robust constrained model predictive control using linear matrix inequalities
Kothare, M. V., Balakrishnan, V., & Morari, M. (1996) · Automatica · doi:10.1016/0005-1098(96)00063-5 · Cited by 2,516
1987 american control conference
(1987) · IEEE Control Systems Magazine · doi:10.1109/mcs.1987.1105260 · Cited by 1,402
Proceedings of the 1993 American Control Conference
(1993) · 1993 American Control Conference · doi:10.23919/acc.1993.4792783 · Cited by 1,310
Adaptive control using multiple models
Narendra, K. S., & Balakrishnan, J. (1997) · IEEE Transactions on Automatic Control · doi:10.1109/9.554398 · Cited by 1,276 · cited 2×
“Recent interest in this approach arises from the following stability result: Theorem 6.2 [71].”
BackgroundMethodInfluentialDiagnosis and Fault-Tolerant Control
(2006) · Springer eBooks · doi:10.1007/978-3-540-35653-0 · Cited by 1,228
Trends in the application of model-based fault detection and diagnosis of technical processes
Isermann, R., & Ballé, P. (1997) · Control Engineering Practice · doi:10.1016/s0967-0661(97)00053-1 · Cited by 1,183 · cited 1×
“In [43] the following definition for a fault is made: A fault is an unpermitted deviation of at least one characteristic property or parameter of the system from the acceptable/usual/standard condition.”
BackgroundFiltering and System Identification: A Least Squares Approach
Verhaegen, M., & Verdult, V. (2007) · Cambridge University Press eBooks · doi:10.1017/cbo9780511618888 · Cited by 820
Self-citationFault-Tolerant Control: The 1997 Situation
Patton, R. J. (1997) · IFAC Proceedings Volumes · doi:10.1016/s1474-6670(17)42536-5 · Cited by 722 · cited 3×
“Subsequent studies following the McDonnell-Douglas DC-10 crash showed that the crash could have been avoided [75].”
BackgroundResult(2006) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2006.885284 · Cited by 714
Evaluation of Optimization Methods for Control Allocation
Bodson, M. (2002) · Journal of Guidance, Control, and Dynamics · doi:10.2514/2.4937 · Cited by 631 · cited 1×
“Other examples of work in the area of control allocation for aerospace applications can be found in [7] and [38].”
BackgroundAdaptive state feedback and tracking control of systems with actuator failures
Tao, G., Joshi, S. M., & Ma, X. (2001) · IEEE Transactions on Automatic Control · doi:10.1109/9.898697 · Cited by 622 · cited 1×
“3) are referred to as multiplicative fault models and have been widely used in the literature (see, for example [86, 73]).”
MethodReliable robust flight tracking control: an LMI approach
Liao, F., Wang, J. L., & Yang, G.-H. (2002) · IEEE Transactions on Control Systems Technology · doi:10.1109/87.974340 · Cited by 553 · cited 1×
“Examples of passive FTC systems can be found in [61, 72, 97].”
BackgroundEigenstructure Assignment for Linear Systems
Andry, A. N., Shapiro, E. Y., & Chung, J.-H. (1983) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/taes.1983.309373 · Cited by 538 · cited 1×
“Eigenstructure Assignment (EA) was made popular in the 1980s primarily by Andry, Shapiro and Chung in their paper [1] where the method of Direct Eigenstructure Assignment (DEA) was introduced.”
MethodMultivariable adaptive algorithms for reconfigurable flight control
Bodson, M., & Groszkiewicz, J. E. (1997) · IEEE Transactions on Control Systems Technology · doi:10.1109/87.556026 · Cited by 457
Adaptive output feedback control of nonlinear systems using neural networks
Calise, A. J., Hovakimyan, N., & Idan, M. (2001) · Automatica · doi:10.1016/s0005-1098(01)00070-x · Cited by 449 · cited 3×
“The techniques presented in this section have been developed and expanded upon in several publications: Single Input Single Output (SISO) stability proofs [19], input saturation [48], combined aero/engine control [42] and highly over-actuated systems [21].”
MethodInfluentialINTERNATIONAL JOURNAL OF INFORMATION TECHNOLOGY
(2024) · doi:10.34218/ijit · Cited by 336
Stability of the pseudo-inverse method for reconfigurable control systems
Gao, Z., & Antsaklis, P. J. (1991) · International Journal of Control · doi:10.1080/00207179108953643 · Cited by 332 · cited 3×
“Simple examples that confirm this fact can easily be generated, see for example [31].”
BackgroundMethodInfluentialProceedings of the 1999 American Control Conference
(1999) · Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251) · doi:10.1109/acc.1999.786374 · Cited by 308
An adaptive actuator failure compensation controller using output feedback
Tao, G., Chen, S., & Joshi, S. M. (2002) · IEEE Transactions on Automatic Control · doi:10.1109/9.989150 · Cited by 289
Dynamic Control Allocation Using Constrained Quadratic Programming
Härkegård, O. (2004) · Journal of Guidance Control and Dynamics · doi:10.2514/1.11607 · Cited by 280 · cited 1×
“Other examples of work in the area of control allocation for aerospace applications can be found in [7] and [38].”
BackgroundFault-tolerant control in dynamic systems: application to a winding machine
(2000) · IEEE Control Systems · doi:10.1109/37.823226 · Cited by 278
Proceedings of the 1997 IEEE International Conference on Control Applications
(1997) · Proceedings of the 1997 IEEE International Conference on Control Applications · doi:10.1109/cca.1997.627452 · Cited by 266
Active Fault Tolerant Control Systems: Stochastic Analysis and Synthesis
Mahmoud, M. M., Jiang, J., & Zhang, Y. M. (2003) · Cited by 259
Bošković, J. D., & Mehra, R. К. (1999) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.1999.786187 · Cited by 258 · cited 2×
“[14] describes a MMST scheme which can handle locked, floating, hard-over or loss of effectiveness actuator failures for an F-18 aircraft carrier landing manoeuvre.”
BackgroundOn-board Component Fault Detection and Isolation Using the Statistical Local Approach
Basseville, M. (1998) · Automatica · doi:10.1016/s0005-1098(98)00086-7 · Cited by 257
Proceedings of the 2004 IEEE International Conference on Control Applications
(2004) · Proceedings of the 2004 IEEE International Conference on Control Applications 2004 CCA-04 · doi:10.1109/cca.2004.1387465 · Cited by 240
Fault tolerant control system design with explicit consideration of performance degradation
Zhang, Y. M., & Jiang, J. (2003) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/taes.2003.1238740 · Cited by 237 · cited 1×
“This situation is often referred to as graceful performance degradation [95].”
BackgroundIdentification of non-linear system structure and parameters using regime decomposition
Johansen, T. A., & Foss, B. A. (1995) · Automatica · doi:10.1016/0005-1098(94)00096-2 · Cited by 231 · cited 1×
“Such approximations are widely used in the literature (see, for instance, [47]).”
Enns, D. (1998) · Guidance, Navigation, and Control Conference and Exhibit · doi:10.2514/6.1998-4109 · Cited by 223 · cited 1×
“…must be made by (for example) minimizing the weighted norm Control allocation has been heavily studied in relation to over-actuated systems (see [29] for a survey) and has received a great deal of attention in the literature for reconfigurable systems as it allows actuator failures to be handled…”
BackgroundMPC fault-tolerant flight control case study: flight 1862
Maciejowski, J. M., & Jones, C. N. (2003) · IFAC Proceedings Volumes · doi:10.1016/s1474-6670(17)36480-7 · Cited by 207 · cited 3×
“Examples of the application of MPC to FTC are numerous [66, 51, 76, 50, 56].”
BackgroundMethodSelf-citationActive Fault Tolerant Control Systems: Stochastic Analysis and Synthesis
Mahmoud, M. M., Jiang, J., & Zhang, Y. M. (2003) · Lecture notes in control and information sciences · doi:10.1007/3-540-36283-5 · Cited by 206
Eigenstructure Assignment for Control System Design
Liu, G. P., & Patton, R. J. (1998) · John Wiley & Sons, Inc. eBooks · Cited by 205
Fault Diagnosis and Reconfiguration in Flight Control Systems
Hajiyev, C. M., & Çalışkan, F. (2003) · Cooperative systems · doi:10.1007/978-1-4419-9166-9 · Cited by 189 · cited 1×
“Some overview books and papers in the field of FTC are [36, 45, 5, 96].”
BackgroundA data driven subspace approach to predictive controller design
Kadali, R., Huang, B., & Rossiter, A. (2003) · Control Engineering Practice · doi:10.1016/s0967-0661(02)00112-0 · Cited by 186 · cited 1×
“The basic SPC algorithm was introduced by [30] and has since been used by various researchers [91, 49, 88].”
MethodOperating regime based process modeling and identification
Johansen, T. A., & Foss, B. A. (1997) · Computers & Chemical Engineering · doi:10.1016/0098-1354(95)00260-x · Cited by 173
Fault-tolerant Control Systems--An Introductory Overview
Jinjiang (2005) · Acta Automatica Sinica · Cited by 172
Model following reconfigurable flight control system for the AFTI/F-16
Morse, W. D., & Ossman, K. (1990) · Journal of Guidance Control and Dynamics · doi:10.2514/3.20568 · Cited by 147 · cited 1×
“Examples of the application of the model following approach can be found in [8, 70, 85].”
BackgroundPassive fault tolerant control of a double inverted pendulum—a case study
Niemann, H., & Stoustrup, J. (2004) · Control Engineering Practice · doi:10.1016/j.conengprac.2004.11.002 · Cited by 145
Direct adaptive reconfigurable control of a tailless fighter aircraft
Calise, A. J., Lee, S., & Sharma, M. (1998) · AIAA Guidance, Navigation, and Control Conference and Exhibit · doi:10.2514/6.1998-4108 · Cited by 144 · cited 3×
“This approach has been successfully demonstrated via simulation on the Tailless Advanced Fighter Aircraft (TAFA) [90, 20] and the X-36 [21].”
BackgroundMethodZhang, Y. M., & Jiang, J. (2006) · IFAC Proceedings Volumes · doi:10.3182/20060829-4-cn-2909.00240 · Cited by 136 · cited 1×
“Some overview books and papers in the field of FTC are [36, 45, 5, 96].”
BackgroundFlight Testing of Reconfigurable Control Law on the X-36 Tailless Aircraft
Brinker, J. S., & Wise, K. A. (2001) · Journal of Guidance Control and Dynamics · doi:10.2514/2.4826 · Cited by 132 · cited 3×
“The output of each controller is a command specifying a desired roll, pitch or yaw moment and it is then the job of the Integrated Control Effector Management (ICEM) [15, 90], a form of control allocation, to generate these moments using the available control surfaces.”
BackgroundMethodNeural network adaptive control of systems with input saturation
Johnson, E. N., & Calise, A. J. (2001) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2001.946179 · Cited by 132 · cited 2×
“The techniques presented in this section have been developed and expanded upon in several publications: Single Input Single Output (SISO) stability proofs [19], input saturation [48], combined aero/engine control [42] and highly over-actuated systems [21].”
MethodClosed-form solutions to constrained control allocation problem
Bordingnon, K. A., & Durham, W. C. (1995) · Journal of Guidance Control and Dynamics · doi:10.2514/3.21497 · Cited by 130
Multiple Timescale Flight Control Using Reconfigurable Sliding Modes
Shtessel, Y. B., Buffington, J., & Banda, S. S. (1999) · Journal of Guidance Control and Dynamics · doi:10.2514/2.4465 · Cited by 129 · cited 2×
“This is handled in [82] by only considering failures which cause a partial loss of effectiveness of”
BackgroundData-driven predictive control for solid oxide fuel cells
Wang, X., Huang, B., & Chen, T. (2006) · Journal of Process Control · doi:10.1016/j.jprocont.2006.09.004 · Cited by 129 · cited 1×
“The basic SPC algorithm was introduced by [30] and has since been used by various researchers [91, 49, 88].”
MethodFault diagnosis based on analytical models for linear and nonlinear systems - a tutorial
Kinnaert, M. (2003) · IFAC Proceedings Volumes · doi:10.1016/s1474-6670(17)36468-6 · Cited by 122 · cited 1×
“For that reason the majority of FDD methods are focused on additive faults [33, 3, 57].”
BackgroundPassive Fault Tolerant Control of a Double Inverted Pendulum - A Case Study Example
Niemann, H., & Stoustrup, J. (2003) · IFAC Proceedings Volumes · doi:10.1016/s1474-6670(17)36611-9 · Cited by 118 · cited 1×
“Examples of passive FTC systems can be found in [61, 72, 97].”
BackgroundIntegrated Design of Reconfigurable Fault-Tolerant Control Systems
Zhang, Y. M., & Jiang, J. (2001) · Journal of Guidance Control and Dynamics · doi:10.2514/2.4687 · Cited by 117 · cited 1×
“Methods which propose EA for use in reconfigurable flight control systems [58, 4, 94] first assume a linear fault model which has been given to the controller by a FDI system.”
Fault Tolerant Control: A Simultaneous Stabilization Result
Stoustrup, J., & Blondel, V. D. (2004) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2003.822999 · Cited by 116 · cited 1×
“Another advantage is that passive FTC systems, due to their lower complexity compared to active FTC systems, can be made more reliable according to classical reliability theory [84].”
BackgroundOnline multiple-model-based fault diagnosis and accommodation
Yen, G. G., & Ho, L.-W. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.809390 · Cited by 114 · cited 1×
“The MM method is frequently used for FDD/FTC purposes [92, 78, 27, 37].”
MethodEfficient Nonlinear Actuator Fault Detection and Isolation System for Unmanned Aerial Vehicles
Ducard, G., & Geering, H. P. (2008) · Journal of Guidance Control and Dynamics · doi:10.2514/1.31693 · Cited by 111 · cited 1×
“The MM method is frequently used for FDD/FTC purposes [92, 78, 27, 37].”
MethodVariable-Structure Multiple-Model Approach to Fault Detection, Identification, and Estimation
Ru, J., & Li, X. R. (2008) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2007.916318 · Cited by 104 · cited 1×
“The MM method is frequently used for FDD/FTC purposes [92, 78, 27, 37].”
MethodStabilized MPC formulations for robust reconfigurable flight control
Kale, M. M., & Chipperfield, A. J. (2004) · Control Engineering Practice · doi:10.1016/j.conengprac.2004.09.001 · Cited by 103 · cited 1×
“Examples of the application of MPC to FTC are numerous [66, 51, 76, 50, 56].”
BackgroundPATTON, R. J., Chen, J., & Processes, S. F. T. (1998) · Medical Entomology and Zoology · Cited by 99
Development of a reconfigurable flight control law for the X-36 tailless fighter aircraft
Calise, A. J. (2000) · AIAA Guidance, Navigation, and Control Conference and Exhibit · doi:10.2514/6.2000-3940 · Cited by 95 · cited 3×
“The techniques presented in this section have been developed and expanded upon in several publications: Single Input Single Output (SISO) stability proofs [19], input saturation [48], combined aero/engine control [42] and highly over-actuated systems [21].”
MethodIntelligent fault diagnosis and control reconfiguration
Rauch, H. E. (1994) · IEEE Control Systems · doi:10.1109/37.291462 · Cited by 94 · cited 1×
“A similar approach is also discussed in [77, 62], where the reconfigured control action uk is directly computed from the nominal control uk as uk = B † f Buk.”
BackgroundReal-Time Adaptive Control Allocation Applied to a High Performance Aircraft
Davidson, J. B., Lallman, F. J., & Bundick, W. T. (2001) · NASA STI Repository (National Aeronautics and Space Administration) · Cited by 90
Direct adaptive reconfigurable flight control for a tailless advanced fighter aircraft
Wise, K. A., Brinker, J. S., Calise, A. J., Enns, D., Elgersma, M. R., & Voulgaris, P. G. (1999) · International Journal of Robust and Nonlinear Control · doi:10.1002/(sici)1099-1239(19991215)9:14<1013::aid-rnc450>3.0.co;2-4 · Cited by 89
A multiple model-based reconfigurable flight control system design
Bošković, J. D., & Mehra, R. К. (2002) · IEEE Conference on Decision and Control (CDC) · doi:10.1109/cdc.1998.762030 · Cited by 89 · cited 5×
“These models are referred to as the identification models [13] and are setup in parallel, with each one having a corresponding controller as shown in Figure 2.9.”
BackgroundMethodInfluentialA multiple model predictive scheme for fault-tolerant flight control design
Gopinathan, M., Bošković, J. D., Mehra, R. К., & Rago, C. (2002) · IEEE Conference on Decision and Control (CDC) · doi:10.1109/cdc.1998.758477 · Cited by 85 · cited 1×
“Although the idea of multiple model control has been around for many years, it has seen some interest in the reconfigurable control literature in the last few years [13, 34, 14, 10, 11, 12, 53, 25].”
BackgroundMultivariable adaptive algorithms for reconfigurable flight control
Bodson, R., & Groszkiewicz, J. E. (2002) · IEEE Conference on Decision and Control (CDC) · doi:10.1109/cdc.1994.411658 · Cited by 73
Controller reconfiguration for non-linear systems
Kanev, S., & Verhaegen, M. (2000) · Control Engineering Practice · doi:10.1016/s0967-0661(00)00074-5 · Cited by 73 · cited 3×
“Structural failures can also be handled in a natural fashion by changing the internal model used to make prediction in either an adaptive fashion [52], a multi-model switching scheme [13] or by assuming an FDI scheme which provides a fault model [40, 39, 55, 66].”
BackgroundSelf-citationThe Implicit Daisy-Chaining Property of Constrained Predictive Control
Maciejowski, J. M. (1998) · Cambridge University Engineering Department Publications Database · Cited by 72
Self-citationIntegrating Model Based Fault Diagnosis with Model Predictive Control
Prakash, J., Narasimhan, S., & Patwardhan, S. C. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie049392z · Cited by 69 · cited 1×
“Examples of the application of MPC to FTC are numerous [66, 51, 76, 50, 56].”
BackgroundNonlinear receding horizon control of an underactuated hovercraft
SEGUCHI, H., & Ohtsuka, T. (2003) · International Journal of Robust and Nonlinear Control · doi:10.1002/rnc.824 · Cited by 68 · cited 1×
“For example, in [79] MPC has been used for real-time control of a miniature hovercraft.”
MethodParametric eigenstructure assignment via output feedback based on singular value decompositions
Duan, G. (2003) · IEE Proceedings - Control Theory and Applications · doi:10.1049/ip-cta:20030142 · Cited by 67
Multiple control effector rate limiting
Durham, W. C., & Bordignon, K. A. (1996) · Journal of Guidance Control and Dynamics · doi:10.2514/3.21576 · Cited by 62 · cited 1×
“In [9] and [28] the problem of control allocation with magnitude and rate limits on the actuators is considered, [24] develops a control allocation controller for the extremely over-actuated Innovative Control Effector (ICE) aircraft and [98] looks at restoring as much of the performance of the…”
BackgroundKanev, S. (2004) · University of Twente Research Information · Cited by 61
Self-citationPerformance analysis on fault tolerant control system
Shin, J.-Y., & Belcastro, C. M. (2006) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2006.876911 · Cited by 59 · cited 1×
“Other applications of LPV control for FTC can be found, for example in [80, 32].”
BackgroundHierarchical Approach to Adaptive Control for Improved Flight Safety
Idan, M., Johnson, M. D., & Calise, A. J. (2002) · Journal of Guidance Control and Dynamics · doi:10.2514/2.5005 · Cited by 58 · cited 1×
“This section examines a method primarily developed by Calise et al [42, 48, 41, 19, 21, 90, 20] involving a Model Reference Adaptive Control (MRAC) scheme through adaptive feedback linearization augmented by an Artificial Neural Network (ANN).”
MethodAdaptive reorganization of switched systems with faulty actuators
Demetriou, M. A. (2002) · IEEE Conference on Decision and Control (CDC) · doi:10.1109/cdc.2001.981179 · Cited by 56 · cited 1×
“Although the idea of multiple model control has been around for many years, it has seen some interest in the reconfigurable control literature in the last few years [13, 34, 14, 10, 11, 12, 53, 25].”
BackgroundSoftware-Enabled Receding Horizon Control for Autonomous Unmanned Aerial Vehicle Guidance
Keviczky, T., & Balas, G. (2006) · Journal of Guidance Control and Dynamics · doi:10.2514/1.15562 · Cited by 49 · cited 2×
“Examples of the application of MPC to FTC are numerous [66, 51, 76, 50, 56].”
BackgroundZhang, D., Wang, Z., & Shou-song, H. (2007) · International Journal of Systems Science · doi:10.1080/00207720601110962 · Cited by 45 · cited 1×
“Examples of passive FTC systems can be found in [61, 72, 97].”
BackgroundAn interacting multiple-model based fault detection, diagnosis and fault-tolerant control approach
Zhan, Y., & Jiang, J. (2003) · IEEE Conference on Decision and Control (CDC) · doi:10.1109/cdc.1999.827910 · Cited by 44 · cited 2×
“[93] proposes an Eigenstructure Assignment (EA) (see Section 2.6.6) method and [68] uses a fixed controller, using the fault model M f only for state estimation.”
MethodInfluentialIntelligent aerodynamic/propulsion flight control for flight safety: a nonlinear adaptive approach
Idan, M., Johnson, M. D., Calise, A. J., & Kaneshige, J. (2001) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2001.946346 · Cited by 42 · cited 2×
“The techniques presented in this section have been developed and expanded upon in several publications: Single Input Single Output (SISO) stability proofs [19], input saturation [48], combined aero/engine control [42] and highly over-actuated systems [21].”
MethodFlight-Test Results of Propulsion-Only Emergency Control System on MD-11 Airplane
Burken, J., & Burcham, F. W. (1997) · Journal of Guidance Control and Dynamics · doi:10.2514/2.4143 · Cited by 40 · cited 1×
“In 1995, a demonstration was made during which a MD-11 (Figure 2.11) and a F-15 recovered from a complete hydraulic failure and landed successfully under propulsion-only control [18].”
BackgroundInfluentialControl and estimation of hybrid systems with mathematical optimization
Mignone, D. (2002) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-a-004279802 · Cited by 37 · cited 1×
“As noted in [69], these failures can be handled naturally in a MPC framework via changes in the input constraints and internal model.”
BackgroundBurcham, F. W., & Pappas, D. (1996) · Guidance, Navigation and Control Conference · doi:10.2514/6.1996-3742 · Cited by 34
Burcham, F. W., Burken, J., Maine, T. A., & Fullerton, C. G. (1997) · Cited by 31
Reconfiguration and scheduling in flight using quasi-LPV high-fidelity models and MBPC control
Huzmezan, M., & Maciejowski, J. M. (1998) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.1998.703294 · Cited by 30 · cited 1×
“Structural failures can also be handled in a natural fashion by changing the internal model used to make prediction in either an adaptive fashion [52], a multi-model switching scheme [13] or by assuming an FDI scheme which provides a fault model [40, 39, 55, 66].”
BackgroundSelf-citationFault-tolerant control of a ship propulsion system using model predictive control
Kerrigan, E. C., & Maciejowski, J. M. (1999) · European Control Conference (ECC) · doi:10.23919/ecc.1999.7100061 · Cited by 28
Self-citationMultiple-model based diagnosis for adaptive fault-tolerant control
Hallouzi, R. (2008) · Research Repository (Delft University of Technology) · Cited by 28
Self-citationReconfigurable flight control of a high incidence research model using predictive control
Huzmezan, M. (1998) · UKACC International Conference on Control · doi:10.1049/cp:19980393 · Cited by 28 · cited 1×
“Structural failures can also be handled in a natural fashion by changing the internal model used to make prediction in either an adaptive fashion [52], a multi-model switching scheme [13] or by assuming an FDI scheme which provides a fault model [40, 39, 55, 66].”
BackgroundAn on-line expert system-based fault-tolerant control system
Liu, W. (1996) · Expert Systems with Applications · doi:10.1016/0957-4174(96)00006-1 · Cited by 28 · cited 1×
“A similar approach is also discussed in [77, 62], where the reconfigured control action u Rk is directly computed from the nominal control u k as u Rk = B † f Bu k .”
Designing dynamic consistency relations for fault detection and isolation
Gertler, J. (2000) · International Journal of Control · doi:10.1080/002071700403484 · Cited by 25 · cited 1×
“For that reason the majority of FDD methods are focused on additive faults [ 33 , 3, 57].”
BackgroundSubspace based direct adaptive ℋ︁∞control
Woodley, B. R., How, J. P., & Kosut, R. L. (2001) · International Journal of Adaptive Control and Signal Processing · doi:10.1002/acs.688 · Cited by 24 · cited 1×
“The basic SPC algorithm was introduced by [30] and has since been used by various researchers [91, 49, 88].”
MethodBurcham, F. W., Burken, J., Maine, T. A., & Bull, J. (1997) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.1997-3189 · Cited by 23 · cited 1×
“After the possibility of control using only the engine throttles was demonstrated by the Sioux City accident (see Chapter 1), and following a recommendation from the National Transportation Safety Board of America, the PCA problem was taken up by the NASA Dryden Flight Research Center [16, 17] in order to provide a ba…”
MethodRobust supervisory fault-tolerant flight control system
Bošković, J. D., Li, S.-M., & Mehra, R. К. (2001) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2001.945999 · Cited by 20 · cited 2×
“Although the idea of multiple model control has been around for many years, it has seen some interest in the reconfigurable control literature in the last few years [13, 34, 14, 10, 11, 12, 53, 25].”
BackgroundBošković, J. D., Li, S.-M., & Mehra, R. К. (2002) · The proceedings of the IEEE Conference on Control Applications/The proceedings of the ... IEEE Conference on Control Applications · doi:10.1109/cca.2000.897470 · Cited by 20 · cited 2×
“Although the idea of multiple model control has been around for many years, it has seen some interest in the reconfigurable control literature in the last few years [13, 34, 14, 10, 11, 12, 53, 25].”
BackgroundA fault-tolerant rollover prevention system based on an LPV method
Gáspár, P., & Bokor, J. (2006) · International Journal of Vehicle Design · doi:10.1504/ijvd.2006.010439 · Cited by 20 · cited 1×
“Other applications of LPV control for FTC can be found, for example in [80, 32].”
BackgroundA bank of reconfigurable LQG controllers for linear systems subjected to failures
Kanev, S., & Verhaegen, M. (2002) · IEEE Conference on Decision and Control (CDC) · doi:10.1109/cdc.2000.912282 · Cited by 18 · cited 1×
“Although the idea of multiple model control has been around for many years, it has seen some interest in the reconfigurable control literature in the last few years [13, 34, 14, 10, 11, 12, 53, 25].”
BackgroundSelf-citationAn Optimization Approach to Control Reconfiguration
Konstantopoulos, I. K., & Antsaklis, P. J. (1999) · Dynamics and Control · doi:10.1023/a:1008394805721 · Cited by 16 · cited 1×
“Other modifications of this approach that were proposed include the consideration of additive faults on the state equation and additive terms on the control action to compensate for them in [73] and static output-feedback in [59].”
MethodA hierarchical approach to adaptive control for improved flight safety
Idan, M., Johnson, M. D., & Calise, A. J. (2001) · AIAA Guidance, Navigation, and Control Conference and Exhibit · doi:10.2514/6.2001-4209 · Cited by 16
Design of Reconfiguring Control Systems via State Feedback Eigenstructure Assignment
Wang, G., Lv, Q., Liang, B., & Duan, G. (2005) · Cited by 14
Lateral-Directional Eigenvector Flying Qualities Guidelines for High Performance Aircraft
Davidson, J. B., & Andrisani, D. (1996) · NASA Technical Reports Server (NASA) · Cited by 13
Flight control reconfiguration using adaptive methods
Groszkiewicz, J. E., & Bodson, M. (2002) · IEEE Conference on Decision and Control (CDC) · doi:10.1109/cdc.1995.480248 · Cited by 11 · cited 1×
“Despite the limitations of adaptive control for recon-figuration, some researchers have attempted to apply it in slightly modified forms [6, 35, 8].”
BackgroundThe frequency-domain heterogeneous control mixer module method for control reconfiguration
Zhenyu, Y., Huazhang, S., & Zongji, C. (2003) · The proceedings of the IEEE Conference on Control Applications/The proceedings of the ... IEEE Conference on Control Applications · doi:10.1109/cca.1999.801147 · Cited by 8 · cited 1×
“In [9] and [28] the problem of control allocation with magnitude and rate limits on the actuators is considered, [24] develops a control allocation controller for the extremely over-actuated Innovative Control Effector (ICE) aircraft and [98] looks at restoring as much of the performance of the original B matrix as po…”
BackgroundGain-Weighted Eigenspace Assignment
Davidson, J. B., & Andrisani, D. (1998) · Journal of Guidance Control and Dynamics · doi:10.2514/2.4341 · Cited by 8 · cited 1×
“The references [22, 58] further describe the use of Eigenstructure Assignment.”
MethodA method for the design of fault-tolerant systems in case of sensor and actuator faults
Kanev, S., Verhaegen, M., & Nijsse, G. (2001) · European Control Conference (ECC) · doi:10.23919/ecc.2001.7076015 · Cited by 7 · cited 3×
“The formulation of IMM as an MPC problem given in [54] also offers the potential of handling actuator constraints naturally.”
BackgroundSelf-citationFault tolerant flight control for a class of control surface failures
Belkharraz, A., & Sobel, K. M. (2000) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2000.877014 · Cited by 7
Bošković, J. D., Li, S.-M., & Mehra, R. К. (2002) · IEEE/ION Position Location and Navigation Symposium · doi:10.1109/plans.2000.838323 · Cited by 4 · cited 2×
“Although the idea of multiple model control has been around for many years, it has seen some interest in the reconfigurable control literature in the last few years [13, 34, 14, 10, 11, 12, 53, 25].”
Background
Research works printed but not linked: 2
- Favoreel, W.: Subspace methods for identification and control of linear and bilinear systems. PhD thesis, Faculty of Engineering, K.U. Leuven, Belgium (1999)
- Maybeck, P.S.: Multiple model adaptive algorithms for detecting and compensating sensor and actuator/surface failures in aircraft flight control systems. International Journal of Robust and Nonlinear Control 9, 1051–1070 (1999) · DOI
Cited by
Aircraft icing: An ongoing threat to aviation safety
Cao, Y., Tan, W., & Wu, Z. (2018) · Aerospace Science and Technology · doi:10.1016/j.ast.2017.12.028 · Cited by 685
Model Predictive Control in Aerospace Systems: Current State and Opportunities
Eren, U., Prach, A., Koçer, B. B., Raković, S. V., Kayacan, E., & Açıkmeşe, B. (2017) · Journal of Guidance, Control, and Dynamics · doi:10.2514/1.g002507 · Cited by 410
Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T. (2022) · IEEE Access · doi:10.1109/access.2022.3180153 · Cited by 328
“However, the use of PFTC is limited in AC drives for the following reasons [33], [306]: − when designing a PFTC system, only selected system failures can be taken into account, usually those that do”
BackgroundZhang, L., Zhuang, S., & Shi, P. (2015) · Automatica · doi:10.1016/j.automatica.2015.02.010 · Cited by 260
Design and Analysis of an Integral Sliding Mode Fault-Tolerant Control Scheme
Hamayun, M. T., Edwards, C., & Alwi, H. (2011) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2011.2180090 · Cited by 192
Metadata
- Authors
- Verhaegen, M., Kanev, S., Hallouzi, R., Jones, C., Maciejowski, J., & Smail, H.
- Affiliations
- Delft University of Technology (NL)
- Energy Research Centre of the Netherlands (NL)
- ETH Zurich (CH)
- University of Cambridge (GB)
- Netherlands Aerospace Centre (NL)
- Venue
- Lecture Notes in Control and Information Sciences
- Publisher
- Springer Berlin Heidelberg
- Published
- 2010
- Pages
- 47-89
- ISSN
- 0170-8643 (ISSN-L)
- 1610-7411
- OpenAlex
- W2881544
- Cited by
- 65
- References
- 108
- Citations by year
- 2026: 2 · 2025: 1 · 2024: 4 · 2023: 7 · 2022: 3 · 2021: 6 · 2020: 4 · 2019: 4 · 2018: 7 · 2017: 4 · 2016: 5 · 2015: 3 · 2014: 4 · 2013: 4 · 2012: 2
- FWCI
- 10.52
- Type
- book chapter
- Language
- en
- Open access
- green
- infoscience.epfl.ch
- Licence
- www.springer.com/tdm (tdm)
- Locations
- Lecture notes in control and information sciences (publishedVersion)
- Cambridge University Engineering Department Publications Database (submittedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Aerospace Engineering › Aerospace Engineering and Control Systems
- Physical Sciences › Engineering › Control and Systems Engineering › Adaptive Control of Nonlinear Systems
- Keywords
- fault-tolerant control, flight control systems, control system failure, fault detection, fault recovery
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.