Influence of silicon additions on the oxidation resistance of a stainless steel
The DOI matches its Crossref record; 16 of the 17 references it cites were found in a registry or an index.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Thermocalc-computed phase diagrams [12] (Fig. 13) show that adding Si to Fe-20Cr and Fe-20Cr-20Ni has very little effect on the critical carbon activities required to form carbides.”
From Effects of Silicon on High Temperature Corrosion of Fe–Cr and Fe–Cr–Ni Alloys in Carbon Dioxide (2014) · cites this paper as [12]
Citations
Cites
The effect of silicon and manganese on the oxidation mechanism of Ni-20 Cr
Douglass, D. L., & Armijo, J. S. (1970) · Oxidation of Metals · doi:10.1007/bf00603657 · Cited by 168
The diffusion of Fe3+ in amorphous SiO2 and the protective properties of SiO2 layers
Atkinson, A., & Gardner, J. W. (1981) · Corrosion Science · doi:10.1016/0010-938x(81)90063-9 · Cited by 107
Volume and Grain-Boundary Diffusion in 20 Cr/25 Ni/Nb Stainless Steel
Smith, A. F., & Gibbs, G. B. (1969) · Metal Science Journal · doi:10.1179/msc.1969.3.1.93 · Cited by 100
Bastow, B. D., Whittle, D. P., & Wood, G. C. (1978) · Oxidation of Metals · doi:10.1007/bf00612088 · Cited by 85
The development of localized pits during stainless steel oxidation
Evans, H. E., Hilton, D. A., Holm, R., & Webster, S. J. (1980) · Oxidation of Metals · doi:10.1007/bf00604566 · Cited by 84
Self-citationThe identification of thin healing layers at the base of oxide scales on FeCr base alloys
Wood, G. C., Richardson, J. A., Hobby, M. G., & Boustead, J. (1969) · Corrosion Science · doi:10.1016/s0010-938x(69)80097-1 · Cited by 76
Kumar, A., & Douglass, D. L. (1976) · Oxidation of Metals · doi:10.1007/bf00611695 · Cited by 75
Chromium-depleted zones and the oxidation process in stainless steels
Evans, H. E., Hilton, D. A., & Holm, R. (1976) · Oxidation of Metals · doi:10.1007/bf00612157 · Cited by 74
Self-citationLong-term oxidation of superalloys
Angerman, C. L. (1972) · Oxidation of Metals · doi:10.1007/bf00610842 · Cited by 49
Evans, H. E., Hilton, D. A., Holm, R., & Webstert, S. J. (1978) · Oxidation of Metals · doi:10.1007/bf00603805 · Cited by 45
Self-citation
Research works printed but not linked: 5
- P. L. Surman, J. Bettleheim, R. B. Dooley, J. Graham, B. Meadowcroft, and P. C. Rowlands, Proceedings of the BNES Conference Corrosion Steels in CO2, Reading (1974), p. 257.
- M. J. Bennet and J. B. Price, Proceedings of the Eighth International Congress of Metallic Corrosion, Mainz, (1981), p. 1026.
- H. E. Evans, D. A. Hilton, R. A. Holm, and S. J. Webster, Proceedings of the Eighth International Congress on Metallic Corrosion, Mainz (1981), p. 762.
- H. E. Evans and D. A. Hilton,Nucl. Energy 18, 33 (1979).
- M. G. Hobby, M. Sc. Thesis, University of Manchester (1968); quoted in Ref. 3.
Cited by
Items 101–191 of 191
Oxidation behaviour and mechanism of a cobalt based superalloy between 1050 and 1250 °C
Liu, L., Wu, S., Yu, G., & Chen, Y. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.06.153 · Cited by 13
Effect of water vapour partial pressure on the chromia (Cr2O3)-based scale stability
Mahboubi, S., Zurob, H. S., Botton, G. A., & Kish, J. R. (2017) · Canadian Metallurgical Quarterly · doi:10.1080/00084433.2017.1373968 · Cited by 15
“The protective SiO2 layer thickness is believed to be ∼1 μm therefore the ∼5 nm thick SiO2 layer observed in this study does not seem to play a role in protectiveness of the alloy against high-temperature oxidation [36].”
BackgroundInfluentialFurugaki, T., Takahashi, H., & Hayashi, S. (2022) · Oxidation of Metals · doi:10.1007/s11085-022-10135-1 · Cited by 12
Effects of Minor Elements on the Cyclic-Oxidation Behavior of Commercial Fe-Base 800-Series Alloys
Li, B., & Gleeson, B. T. (2004) · Oxidation of Metals · doi:10.1023/b:oxid.0000038785.16792.3d · Cited by 12
Oxide-Scale Evolution on a New Ni–Fe-Based Superalloy at High Temperature
Zhang, H., Yang, Z., Wu, Z., Hong, X., Li, Z., Xu, Y., Li, J., Ni, G., & Xiao, X. (2019) · Oxidation of Metals · doi:10.1007/s11085-019-09913-1 · Cited by 11
Tao, X., Yang, Y., Qi, J., Cai, B., Rainforth, W. M., Li, X., & Dong, H. (2023) · Applied Surface Science · doi:10.1016/j.apsusc.2023.157137 · Cited by 11
Buscail, H., Issartel, C., Riffard, F., Rolland, R., Perrier, S., & Fleurentin, A. (2012) · Corrosion Science · doi:10.1016/j.corsci.2012.08.066 · Cited by 12
TYLER, J. W. (1985) · Oxidation of Metals · doi:10.1007/bf00664230 · Cited by 11
Selecting inactive materials with low electrolyte reactivity for lithium-ion cells
Yan, Z., & Obrovac, M. N. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.07.042 · Cited by 11
Silicon effects on the wet oxidation of type 310 stainless steel
Mahboubi, S., Zurob, H. S., Botton, G. A., & Kish, J. R. (2018) · Corrosion Science · doi:10.1016/j.corsci.2018.08.011 · Cited by 11
Wang, S., Song, M., Han, E., & Kuang, W. (2025) · Acta Materialia · doi:10.1016/j.actamat.2025.121351 · Cited by 11
Lal, S., & Upadhyaya, G. S. (1989) · Oxidation of Metals · doi:10.1007/bf00664804 · Cited by 10
Effect of oxygen on the wettability of 304L stainless steel by liquid Ag–Cu eutectic alloy
Kang, Y., Han, J., Kim, H., & Lee, J. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9511-1 · Cited by 10
“72 wt%) and oxygen potential in the Ag–Cu alloy (*10 atm) are enough to form Si oxidation layer [19].”
BackgroundSilicon Contamination During Alloy Oxidation in Water Vapour at 650 °C
Nguyen, T. D., Zhang, J., & Young, D. J. (2022) · Oxidation of Metals · doi:10.1007/s11085-022-10108-4 · Cited by 10
Holm, R., & Evans, H. E. (1987) · Materials and Corrosion · doi:10.1002/maco.19870380503 · Cited by 11
Self-citationYoung, D. J. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100101-1.00006-6 · Cited by 13
Effects of Si, Mn, Ti and Ce on oxidation of Fe-Cr alloys in water vapour
Wang, J., Mao, S., Zhang, J., & Young, D. J. (2025) · npj Materials Degradation · doi:10.1038/s41529-025-00641-3 · Cited by 11
“Some studies 57,58 have indicated that the brittle nature of silica played a part in the fracture mechanism.”
Oxidation study of Fe-8Cr-10Ni-(0-3)Si-(0-6)Mo alloys
Rawers, J. C. (1988) · Oxidation of Metals · doi:10.1007/bf00666840 · Cited by 9
Li, Z., Yang, L., Hong, Y. E., Wu, J., Qin, W., & Wu, X. (2024) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2024.155126 · Cited by 8
Li, Z., Wang, L., Wang, Z., Wang, J., & Xu, W. (2025) · Materials Characterization · doi:10.1016/j.matchar.2025.114842 · Cited by 10
Failure Analysis and Improvement Measures of Grate Bars Used in Iron Ore Pelletizing Plant
Sekhar, C., Moon, A. P., Dwarapudi, S., Kadhe, D. M., Gupta, N., Kundu, S., Mondal, A., Paul, I., & Singh, U. (2021) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-021-05835-9 · Cited by 8
Romedenne, M., Lambeets, S., Song, M., Roach, C., Devaraj, A., & Pillai, R. (2023) · Corrosion Science · doi:10.1016/j.corsci.2023.111348 · Cited by 8
Oxidation of Fe-8Cr-14Ni-Al-Si-Mn from 700 to 1000�C
Rawers, J. C., & Larson, D. E. (1987) · Oxidation of Metals · doi:10.1007/bf00656734 · Cited by 8
Zhou, L., Finklea, H. O., Li, W., Shi, W., Brady, M. P., Eldred, T. B., Garcia, R., Tian, H., Ma, L., Wang, Y., et al. (2022) · Electrochimica Acta · doi:10.1016/j.electacta.2022.140933 · Cited by 8
Bochnowski, W., Szyller, Ł., & Osetek, M. (2019) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2019.04.058 · Cited by 8
Thermal oxidation-resistant surface alloys processed by laser alloying on 35 NCD 16 ferritic steel
Gemelli, E., Galerie, A., & CAILLET, M. (1996) · Journal of Materials Science · doi:10.1007/bf00356271 · Cited by 8
Airaksinen, S., Tuovinen, T., Vuolio, T., Laukka, A., Heikkinen, E., Riekki, E., & Fabritius, T. M. J. (2021) · steel research international · doi:10.1002/srin.202100366 · Cited by 7
Taylor, M. P., & Husband, J. T. (2023) · Materials at High Temperatures · doi:10.1080/09603409.2023.2177938 · Cited by 7
“The values obtained in this way compared well to Cr2O3 formation on similar alloys [7,10].”
ResultOxidation Behavior of Ni-Based Alloys: Effect of Alloying Additions
Xu, Y., Gu, Y., Yan, J., & Sun, F. (2016) · CORROSION · doi:10.5006/2192 · Cited by 7
Influence of Sodium Hydroxide on the Austenitic 330Cb Alloy Oxidation at High Temperature
Buscail, H., Rolland, R., Riffard, F., Issartel, C., Combe, C., & Cardey, P.-F. (2017) · Oxidation of Metals · doi:10.1007/s11085-017-9722-8 · Cited by 7
Zhou, L., Brady, M. P., Li, W., Eldred, T. B., Garcia, R., Zeng, Z., Ma, L., Wang, Y., Hu, S., & Liu, X. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.09.010 · Cited by 7
Polymer-derived SiAlOC coating to improve the high-temperature resistance of chromium
Petry, N., Bik, M., Wilk, Ł., Swadźba, R., Ulrich, A. S., Sitarz, M., Lepple, M., & Galetz, M. C. (2023) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2023.130049 · Cited by 6
Nguyen, T. D., Zhang, J., & Young, D. J. (2023) · High Temperature Corrosion of Materials · doi:10.1007/s11085-023-10200-3 · Cited by 6
Protection of Carbon Steel against Hot Corrosion Using Thermal Spray Si- and Cr-Base Coatings
Porcayo-Calderón, J., Gonzalez-Rodriguez, J. G., & Martínez, L. (1997) · Journal of Materials Engineering and Performance · doi:10.1361/105994998770348070 · Cited by 6
330Cb alloy (Fe35Ni18Cr1Nb2Si) oxidation study between 800 and 1000 °C
Issartel, C., Buscail, H., Nguyen, C. T., & Fleurentin, A. (2010) · Materials and Corrosion · doi:10.1002/maco.200905442 · Cited by 6
Young, D. J. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100101-1.00010-8 · Cited by 6
Rehman, A., Yang, L., Bidabadi, M. H. S., Yu, Z., Zhang, C., Chen, H., & Yang, Z. (2019) · Journal of Iron and Steel Research International · doi:10.1007/s42243-019-00258-2 · Cited by 6
Perez, T., Mathieu, S., Parsa, Y., Latu-Romain, L., Wouters, Y., & Vilasi, M. (2020) · Oxidation of Metals · doi:10.1007/s11085-020-09988-1 · Cited by 6
Chapter 7 Alloy Oxidation III: Multiphase Scales
Young, J. (2008) · Elsevier's corrosion science series · doi:10.1016/s1875-9491(08)00007-0 · Cited by 9
Role of Na2CO3 on an AISI 330 austenitic stainless steels oxidation at 900°C
Buscail, H., Issartel, C., Riffard, F., Perrier, S., Rabaste, F., Poble, O., & Combe, C. (2019) · Materials and Corrosion · doi:10.1002/maco.201810567 · Cited by 5
Shu, M., Sun, Y., Zhou, Q., Xiao, J. M., Ma, Z., & Liu, X. (2022) · Frontiers in Materials · doi:10.3389/fmats.2022.1058045 · Cited by 5
“The presence of silica makes itself replace Cr2O3 to control the oxidation process, and finally sharply reduces the oxidation rate (Evans et al., 1983).”
BackgroundAmrutha, V., Bysakh, S., & Barshilia, H. C. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.107274 · Cited by 5
Electronic-scale assessment of high-temperature oxidation mechanisms in a novel Fe-based alloy
Luo, W., Hou, T., Liang, X., Zhang, D., Lin, H.-F., Li, Y., Zhao, T., Hu, C., Yershov, S., & Wu, K. (2024) · Journal of Iron and Steel Research International · doi:10.1007/s42243-023-01125-x · Cited by 5
Amaya, M., Porcayo-Calderón, J., & Martínez, L. (2001) · CORROSION · doi:10.5006/1.3290373 · Cited by 5
Corrosion Behavior of Different Metallic Materials in Supercritical CO2 at 550°C and 250 Bars
Rouillard, F., Charton, F., & Moine, G. (2010) · NACE CORROSION Conference · doi:10.5006/c2010-10195 · Cited by 6
The effect of carbon and silicon variation on the oxidation resistance of a cobalt-based superalloy
Pek, M. E., Hogg, J. M., Houghton, O. S., Collins, D. M., Jackson, P., & Stone, H. J. (2026) · Corrosion Science · doi:10.1016/j.corsci.2026.113746 · Cited by 4
Overcoming the thermal conductivity versus oxidation resistance barrier in high-temperature steels
Pierce, D. T., Pillai, R., Wang, H., Poplawsky, J. D., Haynes, J. A., Sebeck, K., Tess, M. J., Gingrich, E., & Muralidharan, G. (2025) · Communications Materials · doi:10.1038/s43246-025-00981-2 · Cited by 4
“The formation of Si-rich oxides beneath Cr-rich oxide scales in Fe-and Ni-based alloys slows chromiascalingkineticsbyblockingoutwardCrdiffusionthroughtheoxidelayerorpromoteschromiaformationbyenhancingtheCrtransportfromthealloytotheoxideinterface 17,19,20 .”
The high-temperature oxidation behavior of Co-Re-Cr-based alloys
Gorr, B., Burk, S., & Christ, H. (2011) · JOM · doi:10.1007/s11837-011-0204-1 · Cited by 4
Pereira, J. N., de Souza, V. F., & Malafaia, A. M. D. S. (2021) · Oxidation of Metals · doi:10.1007/s11085-021-10035-w · Cited by 4
Effect of Si content on the oxidation behavior of CoCrWSi coatings at 900 °C
Huang, Y. L., Li, C., Huang, W., Huang, T., & Song, P. Y. (2023) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2023.129729 · Cited by 5
Corrosion Behaviour of Ni-based Alloys 230, 617 and 601 in CO2 Gas at 750 and 850 °C
Li, H., Nguyen, T. D., & Zhang, J. (2024) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad2db3 · Cited by 4
High-temperature oxidation of a 20/25 stainless steel in high-pressure carbon dioxide
Emsley, A., & Hill, M. (1990) · Oxidation of Metals · doi:10.1007/bf00667417 · Cited by 4
Sulfidation Behavior of Fe-25Cr-20Ni-3Si in H2/H2O/H2S/Ar at 700°C
Srinivasan, V., Padgett, R. A., & Choudhury, A. (1991) · CORROSION · doi:10.5006/1.3585310 · Cited by 4
Barshilia, H. C., Amrutha, V., & Bysakh, S. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4519392 · Cited by 4
Si and Y co-alloying for superior LBE corrosion resistance through tailored interphases
Li, W., Zhou, J., Zhang, W., Ren, H., Zhang, J., Fang, W., Zhang, X., Yan, Q., Guo, T., He, Y., et al. (2025) · Corrosion Science · doi:10.1016/j.corsci.2025.113337 · Cited by 3
Chyrkin, A., Roth, J.-P., Naumenko, D., & Jahns, K. (2025) · Corrosion Science · doi:10.1016/j.corsci.2025.113588 · Cited by 4
Mn, Si and Ti in cast stainless steel at elevated temperature
Nilsson, E. A. A., Pettersson, L., & Antti, M. (2017) · Ironmaking & Steelmaking Processes Products and Applications · doi:10.1080/03019233.2017.1405778 · Cited by 3
“92%) lowers the oxidation rate due to the formation of a silica layer which acts as a diffusion barrier for both cations and anions [5].”
BackgroundInfluentialInfluence of atmosphere on high‐temperature oxidation of Fe‐Cr‐Si model alloy
Issartel, C., Buscail, H., & Mathieu, S. (2019) · Materials and Corrosion · doi:10.1002/maco.201810579 · Cited by 3
Jia, G., Xu, W., Pan, J., Li, J., Wang, H., Wang, L., & Xiao, X. (2022) · Materials and Corrosion · doi:10.1002/maco.202213063 · Cited by 3
Intergranular oxidation of silicon in 20Cr-25Ni niobium-stabilized stainless steel at 1140?1230 K
Emsley, A., & Hill, M. (1990) · Oxidation of Metals · doi:10.1007/bf00665023 · Cited by 7
The Role of Protective Scales in Enhancing Oxidation Resistance
Smith, G. D. (1996) · NACE CORROSION Conference · doi:10.5006/c1996-96137 · Cited by 3
Inherent oxidation protection of Fe-5Cr-15Ni-2Si-4.5Mo
Rawers, J. C. (1987) · Oxidation of Metals · doi:10.1007/bf00656706 · Cited by 4
Oxide scale microstructure and failure mechanism of alloy 601 under varying metal dusting conditions
Schlereth, C., Weiser, M., White, E. M. H., Felfer, P. J., & Galetz, M. C. (2024) · Journal of Materials Science · doi:10.1007/s10853-023-09260-2 · Cited by 2
“It is well known from similar materials that Si-rich oxides form at the oxide/metal interface and reduce the outward diffusion of Cr 3+ [49–53].”
High-Temperature Oxidation Study in a Multi-Oxidant Environment Using 18O Tracer
Lehmusto, J., Ievlev, A. V., Kurley, J. M., & Pint, B. A. (2024) · High Temperature Corrosion of Materials · doi:10.1007/s11085-024-10323-1 · Cited by 3
Singh, D., Singh, H., & Kumar, R. (2026) · High Temperature Corrosion of Materials · doi:10.1007/s11085-026-10454-7 · Cited by 2
Relations Between Oxidation Induced Microstructure and Mechanical Durability of Oxide Scales
Parry, V., Pascal, C., Braccini, M., Fedorova, E. N., Mantel, M., Wouters, Y., Oquab, D., Monceau, D., Estevez, R., & Guillaume Parry, A. (2016) · Oxidation of Metals · doi:10.1007/s11085-016-9673-5 · Cited by 2
High-Temperature Oxidation Behavior of a New Ni-Cr-Mo-Si Alloy
Baker, B. A., Smith, G. D., Pint, B. A., & Walker, L. R. (2003) · NACE CORROSION Conference · doi:10.5006/c2003-03476 · Cited by 2
Nickel Base Alloys in High Temperature Applications in the Petrochemical Industry
McCoy, S. A., Baker, B., Smith, G. D., Tassen, C. S., Hazledine, P., & Shoemaker, L. S. (2014) · NACE CORROSION Conference · doi:10.5006/c2014-4330 · Cited by 2
Zhang, J., Lou, B., Wang, S., Huang, Y., Lu, J., & Mao, X. (2026) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2026.133503 · Cited by 1
Ma, J., Tan, J., Yin, X., Wang, H., & He, X. (2025) · Corrosion Science · doi:10.1016/j.corsci.2025.113540 · Cited by 1
Vaché, N., Cazottes, S., Douillard, T., Duret‐Thual, C., Dupoiron, F., Augustin, C., & Steyer, P. (2018) · Oxidation of Metals · doi:10.1007/s11085-018-9880-3 · Cited by 1
Bamba, G., Donnadieu, P., Wouters, Y., & Galerie, A. (2008) · Springer eBooks · doi:10.1007/978-3-540-85226-1_208 · Cited by 1
Scale Formation of SOFC Metallic Interconnects in Coal Syngas
Wang, J. (2008) · D-Scholarship@Pitt (University of Pittsburgh) · Cited by 1
Yun, D. W., Yoo, Y.-S., Jeong, H. W., & Seo, S. M. (2016) · doi:10.1002/9781119075646.ch18 · Cited by 1
“Although SiO 2 has good barrier properties, it can lead to the spallation of the oxide scale due to its large CTE difference with the metal substrate [20, 21].”
Oxidation of heat resistant stainless steels in a pelletizing process
Nilsson, E. (2014) · DiVA (Luleå University of Technology) · Cited by 1
Effects of Silicon on the Oxidation Behavior of Commercial Chromia-Forming Alloys
Li, B., & Gleeson, B. T. (2002) · NACE CORROSION Conference · doi:10.5006/c2002-02393 · Cited by 1
刘兰兰, & 牛焱 (2014) · Zhongguo fushi yu fanghu xuebao · doi:10.11902/1005.4537.2013.169
Influence of Si Content on the Oxide Scale Formation of Ni-Based Alloy
Lei, C., Chen, L. X., Zhang, N., & Yin, Y. S. (2009) · Advanced materials research · doi:10.4028/www.scientific.net/amr.79-82.2239
Intergranular Corrosion of Silicon-Containing Duplex Stainless Steel Weldments
Kang, D., & Lee, H. W. (2019) · International Journal of Electrochemical Science · doi:10.20964/2019.05.65
Analyses of HAZEN Corrosion Coupons, Rev. 1 (U)
Savannah River Site (SRS), A., Subramanian, K., & USDOE (2006) · doi:10.2172/1510922
“The enhanced resistance has been attributed to the formation of a protective and tenacious silica layer.[11] It has also been proposed that the silica layer enhances the formation of stable chromia layers and may act as a diffusion barrier.”
BackgroundRole of sulphur on carbon deposition on AGR fuel cladding steel
Rai, S. (2019) · University of Birmingham Institutional Research Archive (University of Birmingham)
High‐Temperature Oxidation Behaviour of Co‐Re‐Cr‐based Alloys
Gorr, B., Burk, S., & Christ, H. ‐. (2011) · Wiley eBooks · doi:10.1002/9781118062111.ch69
Analyses of HAZEN Corrosion Coupons, Rev. 1 (U)
Savannah River Site (SRS), A., Subramanian, K., & USDOE (2006) · doi:10.2172/1510926
Cyclic Oxidation Behavior of 800 Series Chromia-Forming Alloys
Li, B., & Gleeson, B. (2001) · NACE CORROSION Conference · doi:10.5006/c2001-01163
Chyrkin, A., Roth, J.-P., Jahns, K., & Naumenko, D. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5499491
Superior oxidation resistance in a novel low-cost press hardening steel with Si dopingPreprint
Zhang, J., Lou, B., Wang, S., Huang, Y., Lu, J., & Mao, X. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5499492
Yu, C. J., Zhu, L., Lu, Y., & Zhao, Y. D. (2025) · Surfaces and Interfaces · doi:10.1016/j.surfin.2025.107824
Performance of Fe-Si Coatings under Vanadic Attack
Porcayo-Calderón, J., & Martínez, L. (1996) · NACE CORROSION Conference · doi:10.5006/c1996-96169
Camperos, S. (2016) · theses.fr (ABES) · doi:10.70675/c30b7b7az4289z4117zb2a7z86299ddbf74e · Cited by 2
High-Temperature Isothermal Oxidation Behavior of Newly Developed Fe–Cr–Ni Austenite Stainless Steel
Husain, M. N., Muniyandi, T., Balaguru, B., Kirubaharan, A. M. K., Chandrasekar, A., & Devarajan, D. (2026) · Materials · doi:10.3390/ma19071461
“The reason for the increased oxidation resistance in the intermediate composition is the development of a silica inter-layer between the Cr 2 O 3 oxide layer and the metal, which acts as a diffusion barrier [15].”
Influential
Metadata
- Authors
- Evans, H. E., Hilton, D. A., Holm, R. A., & Webster, S. J.
- Affiliations
- Central Electricity Generating Board (GB)
- United Kingdom Atomic Energy Authority (GB)
- Venue
- Oxidation of Metals
- Published
- 1983-02
- Volume
- 19
- Issue
- 1-2
- Pages
- 1-18
- ISSN
- 0030-770X (ISSN-L)
- 1573-4889
- OpenAlex
- W1979722091
- Cited by
- 191
- References
- 17
- Citations by year
- 2026: 4 · 2025: 11 · 2024: 9 · 2023: 12 · 2022: 10 · 2021: 11 · 2020: 5 · 2019: 10 · 2018: 7 · 2017: 9 · 2016: 12 · 2015: 6 · 2014: 10 · 2013: 5 · 2012: 6
- FWCI
- 3.71
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- Locations
- Oxidation of Metals (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
- Physical Sciences › Materials Science › Metals and Alloys › Hydrogen embrittlement and corrosion behaviors in metals
- Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep
- Keywords
- silicon addition, oxidation resistance, chromia scale, parabolic rate constant, oxide spalling, subsurface voids, high-temperature oxidation, CO2 atmosphere
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.