Part orientation optimisation for the additive layer manufacture of metal components
Open accessThe DOI matches its Crossref record.
Abstract
In a number of additive layer manufacturing processes, particularly for metals, additional support structure is required during the build process to act as scaffolding for overhanging features and to dissipate process heat. Such structures use valuable raw materials and their removal adds to post processing time. The objective of this study was to investigate whether a simple, single objective optimisation technique could be used to find the best orientation of the part, that would minimise the volume of support needed during the build. Not only reducing waste but potentially providing an effective and consistent approach for inexperienced users to orient components during manufacture. Software was developed using MatLab with an unconstrained optimisation algorithm implemented to search the different rotations of the part and identify the configuration with the least requirement for support volume. The algorithm was gradient based, and so multiple starting points were used to identify a global minimum. The efficacy of the algorithm is illustrated with three different case studies of increasing complexity. Additionally, the component of the final study was manufactured, which allowed a comparison between the algorithm’s results and the orientations chosen by experienced operatives. In two of the three case studies, the software was able to find good solutions for the support volume minimisation. For the manufactured part, only one of the results matched the orientation chosen by the operators, the other was orientated in a similar way but the difference added significantly to the required support volume. Future developments of the software would benefit from incorporating the expertise of the manufacturing operative.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review of topology optimization for additive manufacturing: Status and challenges
ZHU, J., ZHOU, H., WANG, C., ZHOU, L., YUAN, S., & ZHANG, W. (2021) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2020.09.020 · Cited by 874
Current and future trends in topology optimization for additive manufacturing
Liu, J., Gaynor, A. T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C. C. L., et al. (2018) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-1994-3 · Cited by 870
“Optimization of the build directionwould also effectively reduce the support material consumption (Morgan et al. 2016; Muir et al. 2014).”
BackgroundAdditive manufacturing: Challenges, trends, and applications
Abdulhameed, O., Al-Ahmari, A., Ameen, W., & Mian, S. H. (2019) · Advances in Mechanical Engineering · doi:10.1177/1687814018822880 · Cited by 861
From Topology Optimization Design to Additive Manufacturing: Today’s Success and Tomorrow’s Roadmap
Meng, L., Zhang, W., Quan, D., Shi, G., Tang, L., Hou, Y., Breitkopf, P., Zhu, J., & Gao, T. (2020) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-019-09331-1 · Cited by 402
Zhang, X., Li, W., & Liou, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1413-8 · Cited by 73
Metadata
- Authors
- Morgan, H. D., Cherry, J. A., Jonnalagadda, S., Ewing, D., & Sienz, J.
- Venue
- The International Journal of Advanced Manufacturing Technology
- Published
- 2016-01-11
- Volume
- 86
- Issue
- 5-8
- Pages
- 1679-1687
- ISSN
- 0268-3768 (ISSN-L)
- 1433-3015
- OpenAlex
- W2237465689
- Cited by
- 102
- References
- 0
- FWCI
- 11.51
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Part orientation optimisation for the additive layer manufacture of metal components. https://app.cochat.ai/papers/10.1007/s00170-015-8151-6
- The paper
- Morgan, H. D., Cherry, J. A., Jonnalagadda, S., Ewing, D., & Sienz, J. (2016). Part orientation optimisation for the additive layer manufacture of metal components. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-015-8151-6
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.