Cited by 72biodegradable polymer synthesis and propertiesEnzyme Catalysis and ImmobilizationIonic liquids properties and applications

Enzymatic synthesis of poly-l-lactide and poly-l-lactide-co-glycolide in an ionic liquid

Chanfreau, Sébastien, Mena, Maria, Porras-Domínguez, Jaime R., Ramírez-Gilly, Mariana, Gimeno, Miquel, Roquero, Pedro, Tecante, Alberto, Bárzana, Eduardo·2010·Bioprocess and Biosystems Engineering

Abstract

The syntheses of poly-L-lactide (PLLA) and poly-L-lactide-co-glycolide (PLLGA) is reported in the ionic liquid 1-hexyl-3-methylimidazolium hexafluorophosphate [HMIM][PF(6)] mediated by the enzyme lipase B from Candida antarctica (Novozyme 435). The highest PLLA yield (63%) was attained at 90 degrees C with a molecular weight (M(n)) of 37.8 x 10(3) g/mol determined by size exclusion chromatography. This procedure produced relatively high crystalline polymers (up to 85% PLLA) as determined by DSC. In experiments at 90 degrees C product synthesis also occurred without biocatalyst, however, PLLA synthesis in [HMIM][PF(6)] at 65 degrees C followed only the enzymatic mechanism as ring opening was not observed without the enzyme. In addition, the enzymatic synthesis of PLLGA is first reported here using Novozyme 435 biocatalyst with up to 19% of lactyl units in the resulting copolymer as determined by NMR. Materials were also characterized by TGA, MALDI-TOF-MS, X-ray diffraction, polarimetry and rheology.

Integrity signals

Registry

Crossref · 10.1007/s00449-009-0388-8

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • Lactic acid has two optical isomers, l-lactic acid and d-lactic acid, due to an asymmetric carbon atom in the molecule.

    “As the simplest hydroxy acid, there is an asymmetric carbon atom in the molecule that is optically active, so there are two optical isomers, l-lactic acid and d-lactic acid, as shown in Figure 1 [21,22].”

    From Synthesis and Biological Application of Polylactic Acid (2020) · cites this paper as [21]

The citation lists haven’t been fetched yet

References 29 · Cited by 72

Authors
Chanfreau, S., Mena, M., Porras-Domínguez, J. R., Ramírez-Gilly, M., Gimeno, M., Roquero, P., Tecante, A., & Bárzana, E.
Affiliations
Universidad Nacional Autónoma de México (MX)
Corresponding author
  • Gimeno, Miquel
  • Bárzana, Eduardo
Venue
Bioprocess and Biosystems Engineering
Published
2009-11-04
Volume
33
Issue
5
Pages
629-638
ISSN
  • 1615-7591 (ISSN-L)
  • 1615-7605
OpenAlex
W1987382407
Cited by
72
References
29
Citations by year
2026: 2 · 2025: 5 · 2024: 3 · 2023: 4 · 2022: 6 · 2021: 5 · 2020: 1 · 2019: 7 · 2018: 3 · 2017: 4 · 2016: 4 · 2015: 7 · 2014: 3 · 2013: 2 · 2012: 6
FWCI
2.34
Type
journal article
Language
en
Open access
closed
Locations
  • Bioprocess and Biosystems Engineering (publishedVersion)
  • PubMed (publishedVersion)
Topics
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Enzyme Catalysis and Immobilization
  • Physical Sciences › Chemical Engineering › Catalysis › Ionic liquids properties and applications
Keywords
poly(L-lactic acid), poly(L-lactide-co-glycolide), enzymatic polymerization, lipase B, Novozym 435, Candida antarctica, ionic liquids, 1-hexyl-3-methylimidazolium hexafluorophosphate, biocatalysis, ring-opening polymerization, crystallinity, copolymer composition
MeSH terms
Polylactic Acid-Polyglycolic Acid Copolymer, Candida, Catalysis, Enzymes, Immobilized, Fungal Proteins, Imidazoles, Ions, Lipase, Polyesters, Polyglycolic Acid, Lactic Acid

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review