Design parameters comparison of bubble column, airlift and stirred tank photobioreactors for microalgae production
Open accessThe DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Abstract
Microalgae are the most propitious feedstock for biofuel production due to their lipid and fatty acid content. Microalgae cultivation shares many features with bioreactors, such as thermal and pH regulation, feeding procedures, and mixing to enhance heat and mass transfers. Aeration and stirring speeds are important parameters to reduce the costs of producing microalgae. In this study, three different photobioreactor types (stirred tank, airlift, bubble column) were characterized and compared for microalgae production. Hydrodynamics, mass transfer, and power consumption were determined for various aeration rates (0.9, 1.2, 1.5 L/min), and stirring speeds (100, 200 rpm), and Chlorella sorokiniana growth performance was compared under the conditions that provided the highest volumetric mass transfer and the lowest mixing time. Photo-bioreactor homogenization was good as indicated by low mixing times (< 10 s). Bubble column had the highest volumetric mass transfer due to its sparger design. Gas holdup and volumetric mass transfer coefficient were found to increase with the air flow rate and stirring speed. For stirred tank, bubble column, and airlift photobioreactors, maximum specific growth rates of C. sorokiniana were 0.053, 0.061, 0.057 h−1, and biomass productivities were 0.064, 0.097, 0.072 gdw/L.day, respectively. Under the conditions tested, growth was limited by the volumetric mass transfer in the airlift and stirred tank and bubble column was the best option for producing microalgae. These findings pave way for more extensive use of these systems in producing microalgae and provide a basis to compare photobioreactors of different designs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design parameters estimations for bubble column reactors
Shah, Y. T., Kelkar, B. G., Godbole, S. P., & Deckwer, W. ‐. (1982) · AIChE Journal · doi:10.1002/aic.690280302 · Cited by 1,202 · cited 1×
“The correlation that fits best to the operating conditions of this study is proposed Shah et al. (1982) as k L a = 1.174·U G0 .82 (sintered plate sparger, 10–15 cm PBR diameter, 2.5–4.4 m PBR height, U G = 0.3–8 cm/s) with an error range of 17% [31].”
BackgroundInfluentialDevelopment of Suitable Photobioreactor for Algae Production—A Review
Singh, R. N., & Sharma, S. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.026 · Cited by 605
Closed photobioreactors for production of microalgal biomasses
Wang, B., Lan, C. Q., & Horsman, M. (2012) · Biotechnology Advances · doi:10.1016/j.biotechadv.2012.01.019 · Cited by 488
Bubble-column and airlift photobioreactors for algal culture
Sánchez Mirón, A., García Camacho, F., Contreras Gómez, A., Grima, E. M., & Chisti, Y. (2000) · AIChE Journal · doi:10.1002/aic.690460915 · Cited by 288
Growth characteristics of Chlorella sorokiniana in airlift and bubble column photobioreactors
Kumar, K., & Das, D. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.03.074 · Cited by 139 · cited 2×
“More specifically, k L a(CO 2 ) can be calculated by multiplying k L a(O 2 ) by 0.91 [27, 28].”
BackgroundInfluentialMixing in Bubble Column and Airlift Reactors
Sánchez Mirón, A., Cerón García, M.-C., García Camacho, F., Molina Grima, E., & Chisti, Y. (2004) · Chemical Engineering Research and Design · doi:10.1205/cerd.82.10.1367.46742 · Cited by 125
Guo, X., Yao, L., & Huang, Q. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.04.077 · Cited by 118 · cited 10×
“In larger ALRs, higher liquid velocities were reported, 5–25 cm/s in a 50L rectangular ALR depending on air velocity and top clearance [16] and 19–29 cm/s in a 40L split cylinder ALR, where the authors also stated that liquid velocity was lower in draft tube ALR [21].”
BackgroundMethodResultInfluentialReyna-Velarde, R., Cristiani-Urbina, E., Hernández-Melchor, D. J., Thalasso, F., & Cañizares-Villanueva, R. O. (2010) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/j.cep.2009.11.014 · Cited by 84
Hydrodynamics and mass transfer coefficients in a bubble column photo-bioreactor
Manjrekar, O. N., Sun, Y., He, L., Tang, Y. J., & Dudukovic, M. P. (2017) · Chemical Engineering Science · doi:10.1016/j.ces.2017.04.016 · Cited by 46
Influence of photobioreactor configuration on microalgal biomass production
Banerjee, S., Dasgupta, S., Das, D., & Atta, A. (2020) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-020-02342-4 · Cited by 38 · cited 2×
“More specifically, k L a(CO 2 ) can be calculated by multiplying k L a(O 2 ) by 0.91 [27, 28].”
BackgroundResultInfluential
Cited by
Recent advancements in photo-bioreactors for microalgae cultivation: a brief overview
Penloglou, G., Pavlou, A., & Kiparissides, C. (2024) · Processes · doi:10.3390/pr12061104 · Cited by 166
Sarmah, M., & Panda, M. R. (2026) · World Journal of Microbiology and Biotechnology · doi:10.1007/s11274-026-04849-6 · Cited by 3
“They are low-cost, have no moving parts (reducing cell damage), and are ideal for uniform algal cultivation with efficient CO₂ and O₂ trans - fer (Uyar et al. 2024).”
Hybrid and nonconventional photobioreactors applied to microalgae production
Rodríguez Padrón, R. A., & Ramírez Mérida, L. G. (2025) · Algal Bioreactors · doi:10.1016/b978-0-443-14058-7.00035-x · Cited by 3
Metadata
- Authors
- Uyar, B., Ali, M. D., & Uyar, G. E. O.
- Venue
- Bioprocess and Biosystems Engineering
- Published
- 2024-01-16
- Volume
- 47
- Issue
- 2
- Pages
- 195-209
- ISSN
- 1615-7591 (ISSN-L)
- 1615-7605
- OpenAlex
- W4390908235
- Cited by
- 76
- References
- 11
- FWCI
- 5.02
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design parameters comparison of bubble column, airlift and stirred tank photobioreactors for microalgae production. https://app.cochat.ai/papers/10.1007/s00449-023-02952-8
- The paper
- Uyar, B., Ali, M. D., & Uyar, G. E. O. (2024). Design parameters comparison of bubble column, airlift and stirred tank photobioreactors for microalgae production. Bioprocess and Biosystems Engineering. https://doi.org/10.1007/s00449-023-02952-8
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.