The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Direct materials deposition: designed macro and microstructure
Open accessAbstract
Solid freeform fabrication of engineering materials is now possible using the Direct Metal Deposition (DMD) technique. Closed loop optical feedback system for DMD makes realistic components with dimensional accuracy of 0.01 inch. On the other hand, close control of the process parameter can provide microstructure of choice. Such continued capability to control macro and microstructure is creating considerable interest. H13 tool steel is one of the difficult alloys for deposition due to residual stress accumulation from martensitic transformation. However, it is the material of choice for the die and tool industry. DMD offers Copper chill blocks and water cooling channels as the integral part of the tool. On the other hand ZrO2 was co-deposited with nickel superalloys using DMD. This process thus is amenable to produce both macro and microstructure to a designed specification. This paper briefly reviews the state of the art of DMD and describes the microstructure and mechanical properties of selected engineering alloy systems deposited by DMD.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fundamentals of Solidification
Kurz, W., & Fisher, D. J. (2012) · ASM International eBooks · doi:10.31399/asm.tb.pdub.t53420429 · Cited by 3,287
Fundamentals of Solidification: Fourth Revised Edition
Kurz, W., & Fisher, D. J. (1998) · Retrospective Collection · doi:10.4028/www.scientific.net/rc.35 · Cited by 1,955
The direct metal deposition of H13 tool steel for 3-D components
Mazumder, J., Choi, J., Nagarathnam, K., Koch, J. A., & Hetzner, D. W. (1997) · JOM · doi:10.1007/bf02914687 · Cited by 265
Self-citation
Cited by
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Thompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
Shamsaei, N., Yadollahi, A., Bian, L., & Thompson, S. M. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.002 · Cited by 1,108
Metadata
- Authors
- Mazumder, J., Schifferer, A., & Choi, J.
- Venue
- Materials Research Innovations
- Publisher
- Informa UK Limited
- Published
- 1999-10
- Volume
- 3
- Issue
- 3
- Pages
- 118-131
- ISSN
- 1432-8917 (ISSN-L)
- 1433-075X
- OpenAlex
- W3037947635
- Cited by
- 302
- References
- 3
- FWCI
- 14.17
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.