The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
A Review of Factors Affecting the Burning Behaviour of Wood for Application to Tall Timber Construction
Open accessAbstract
This paper presents a review of the pyrolysis, ignition, and combustion processes associated with wood, for application in tall timber construction. The burning behaviour of wood is complex. However the processes behind pyrolysis, ignition, combustion, and extinction are generally well understood, with good agreement in the fire science literature over a wide range of experimental conditions for key parameters such as critical heat flux for ignition (12 kW/m2 ± 2 kW/m2) and heat of combustion (17.5 MJ/kg ± 2.5 MJ/kg). These parameters are key for evaluating the risks posed by using timber as a construction material. Conversely, extinction conditions are less well defined and understood, with critical mass loss rates for extinction varying from 2.5 g/m2s to 5 g/m2s. A detailed meta-analysis of the fire resistance literature has shown that the rate of burning as characterised by charring rate averaged over the full test duration is observed to vary with material properties, in particular density and moisture content which induce a maximum 18% variability over the ranges expected in design. System properties are also shown to be important, with stochastic phenomena such as delamination and encapsulation failure resulting in changes to the charring rate that cannot be easily predicted. Finally, the fire exposure as defined by incident heat flux has by far the largest effect on charring rates over typical heat fluxes experienced in compartment fires. Current fire design guidance for engineered timber products is largely prescriptive, relying on fixed “charring rates” and “zero-strength layers” for structural analyses, and typically prescribing gypsum encapsulation to prevent or delay the involvement of timber in a fire. However, it is clear that the large body of scientific knowledge that exists can be used to explicitly address the fire safety issues that the use of timber introduces. However the application of this science in real buildings is identified as a key knowledge gap which if explored, will enable improved efficiencies and innovations in design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
SFPE Handbook of Fire Protection Engineering
(2016) · Springer eBooks · doi:10.1007/978-1-4939-2565-0 · Cited by 3,803
An Introduction to Fire Dynamics
Drysdale, D. (2011) · Wiley eBooks · doi:10.1002/9781119975465 · Cited by 2,598
Modeling chemical and physical processes of wood and biomass pyrolysis
DIBLASI, C. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.12.001 · Cited by 1,752
The mechanism for thermal decomposition of cellulose and its main products
Shen, D. K., & Gu, S. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.06.095 · Cited by 994
Structural Design for Fire Safety
Buchanan, A. H., & Abu, A. K. (2016) · doi:10.1002/9781118700402 · Cited by 929
Structural design for fire safety
Milke, J. (2002) · Fire Safety Journal · doi:10.1016/s0379-7112(02)00022-x · Cited by 407
Mathematical Model for Wood PyrolysisComparison of Experimental Measurements with Model Predictions
Grønli, M. G., & Melaaen, M. C. (2000) · Energy & Fuels · doi:10.1021/ef990176q · Cited by 320
Thermal Effects in Cellulose Pyrolysis: Relationship to Char Formation Processes
Milosavljevic, I., Oja, V., & Suuberg, E. M. (1996) · Industrial & Engineering Chemistry Research · doi:10.1021/ie950438l · Cited by 319
The combustion of wood. Part I
Bamford, C. H., Crank, J., & Malan, D. H. (1946) · Mathematical Proceedings of the Cambridge Philosophical Society · doi:10.1017/s030500410002288x · Cited by 255
Cited by
Structural Repair of Fire-Damaged Glulam Timber
Chorlton, B., & Gales, J. (2021) · Journal of Architectural Engineering · doi:10.1061/(asce)ae.1943-5568.0000445 · Cited by 6
Metadata
- Authors
- Bartlett, A. I., Hadden, R. M., & Bisby, L. A.
- Venue
- Fire Technology
- Published
- 2018-11-16
- Volume
- 55
- Issue
- 1
- Pages
- 1-49
- ISSN
- 0015-2684 (ISSN-L)
- 1572-8099
- OpenAlex
- W2901618116
- Cited by
- 335
- References
- 40
- Type
- book review
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Review of Factors Affecting the Burning Behaviour of Wood for Application to Tall Timber Construction. https://app.cochat.ai/papers/10.1007/s10694-018-0787-y
- The paper
- Bartlett, A. I., Hadden, R. M., & Bisby, L. A. (2019). A Review of Factors Affecting the Burning Behaviour of Wood for Application to Tall Timber Construction. Fire Technology. https://doi.org/10.1007/s10694-018-0787-y
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.