The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
The Hall–Petch and inverse Hall–Petch relations and the hardness of nanocrystalline metals
Open accessAbstract
We review some of the factors that influence the hardness of polycrystalline materials with grain sizes less than 1 µm. The fundamental physical mechanisms that govern the hardness of nanocrystalline materials are discussed. The recently proposed dislocation curvature model for grain size-dependent strengthening and the 60-year-old Hall–Petch relationship are compared. For grains less than 30 nm in size, there is evidence for a transition from dislocation-based plasticity to grain boundary sliding, rotation, or diffusion as the main mechanism responsible for hardness. The evidence surrounding the inverse Hall–Petch phenomenon is found to be inconclusive due to processing artefacts, grain growth effects, and errors associated with the conversion of hardness to yield strength in nanocrystalline materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Deformation and Ageing of Mild Steel: III Discussion of Results
Hall, E. O. (1951) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/64/9/303 · Cited by 7,872
Mechanical properties of nanocrystalline materials
Meyers, M. A., Mishra, A., & Benson, D. J. (2006) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.08.003 · Cited by 4,597
Gleiter, H. (1989) · Progress in Materials Science · doi:10.1016/0079-6425(89)90001-7 · Cited by 3,674
The Cleavage Strength of Polycrystals
Petch, N. J. (1953) · Medical Entomology and Zoology · Cited by 3,641
Tabor, D. (2000) · doi:10.1093/oso/9780198507765.001.0001 · Cited by 3,118
A Model for Boundary Diffusion Controlled Creep in Polycrystalline Materials
Coble, R. L. (1963) · Journal of Applied Physics · doi:10.1063/1.1702656 · Cited by 2,333
Revealing the Maximum Strength in Nanotwinned Copper
Lu, L., Chen, X., Huang, X., & Lu, K. (2009) · Science · doi:10.1126/science.1167641 · Cited by 2,110
A Maximum in the Strength of Nanocrystalline Copper
Schiøtz, J., & Jacobsen, K. W. (2003) · Science · doi:10.1126/science.1086636 · Cited by 1,479
The Existence of Publication Bias and Risk Factors for Its Occurrence
Dickersin, K. (1990) · JAMA: The Journal of the American Medical Association · doi:10.1001/jama.1990.03440100097014 · Cited by 1,417 · cited 1×
“However, the published data are subject to publication bias, defined as the tendency on the part of researchers to publish articles based on the perceived strength of the findings of a particular study [63].”
BackgroundOn grain boundary sliding and diffusional creep
Raj, R., & Ashby, M. F. (1971) · Metallurgical Transactions · doi:10.1007/bf02664244 · Cited by 1,262
Cited by
Heterostructured stainless steel: Properties, current trends, and future perspectives
Romero-Resendiz, L., El-Tahawy, M., Zhang, T., Rossi, M. C., Marulanda-Cardona, D. M., Yang, T., Amigó-Borrás, V., Huang, Y., Mirzadeh, H., Beyerlein, I. J., et al. (2022) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2022.100691 · Cited by 278
Metadata
- Authors
- Naik, S. N., & Walley, S. M.
- Venue
- Journal of Materials Science
- Published
- 2019-11-14
- Volume
- 55
- Issue
- 7
- Pages
- 2661-2681
- ISSN
- 0022-2461 (ISSN-L)
- 1573-4803
- OpenAlex
- W2984349475
- Cited by
- 609
- References
- 37
- FWCI
- 14.85
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Hall–Petch and inverse Hall–Petch relations and the hardness of nanocrystalline metals. https://app.cochat.ai/papers/10.1007/s10853-019-04160-w
- The paper
- Naik, S. N., & Walley, S. M. (2020). The Hall–Petch and inverse Hall–Petch relations and the hardness of nanocrystalline metals. Journal of Materials Science. https://doi.org/10.1007/s10853-019-04160-w
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.