Characterization and Application in Biocomposites of Residual Microalgal Biomass Generated in Third Generation Biodiesel
Open accessThe DOI matches its Crossref record.
Abstract
This research paper provides a brief discussion about the relevance of third generation biodiesel co-products diversification. This diversification can be performed through the utilization of residual microalgal biomass (RMB) after oil extraction process. The present work analyses the use of RMB as potential filler for biocomposite production by means of understanding the chemical composition, the thermal stability as well as the protein content of RMB. Thermogravimetric analysis revealed the processing window of the RMB for biocomposite production and its dependence on its purity, especially on residual fat content. Biocomposites of RMB and poly(butylene succinate) (PBS) were prepared by melting processing technique using extrusion followed by injection-molding. Tensile, flexural and impact properties of the processed samples were evaluated. Scanning electron microscopy of fractured sections of the biocomposites was also used to examine the dispersion of RMB in PBS matrix. Finally, this study shows a competitive alternative to produce PBS-RMB biocomposites by replacing PBS by RMB in the range between 20 and 30 %. However, further studies are necessary to improve the compatibility of RMB with PBS to obtain competitive mechanical properties, compared to neat materials through, for instance, block co-polymers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Microalgae-based bioplastics: Future solution towards mitigation of plastic wastes
Roy Chong, J. W., Tan, X., Khoo, K. S., Ng, H. S., Jonglertjunya, W., Yew, G. Y., & Show, P. L. (2022) · Environmental Research · doi:10.1016/j.envres.2021.112620 · Cited by 142
Biorefinery of microalgae – opportunities and constraints for different production scenarios
Hariskos, I., & Posten, C. (2014) · Biotechnology Journal · doi:10.1002/biot.201300142 · Cited by 126
“RB can still contain reasonable amounts of proteins and carbohydrates after lipid extraction [65].”
BackgroundLipid-extracted algal biomass based biocomposites fabrication with poly(vinyl alcohol)
Tran, D.-T., Lee, H. R., Jung, S., Park, M. S., & Yang, J.-W. (2018) · Algal Research · doi:10.1016/j.algal.2016.08.016 · Cited by 60
Microalgal kinetics—A guideline for photobioreactor design and process development
Schediwy, K., Trautmann, A., Steinweg, C., & Posten, C. (2019) · Engineering in Life Sciences · doi:10.1002/elsc.201900107 · Cited by 42
Reconsidering the potential of direct microalgal biomass utilization as end-products: A review
Choi, H. I., Sung, Y. J., Hong, M. E., Han, J., Min, B. K., & Sim, S. J. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111930 · Cited by 37
Metadata
- Authors
- Toro, C., Reddy, M. M., Navia, R., Rivas, M., Misra, M., & Mohanty, A. K.
- Venue
- Journal of Polymers and the Environment
- Published
- 2013-07-12
- Volume
- 21
- Issue
- 4
- Pages
- 944-951
- ISSN
- 1064-7546 (ISSN-L)
- 1566-2543
- 1572-8900
- OpenAlex
- W2002895367
- Cited by
- 45
- References
- 0
- FWCI
- 1.20
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Characterization and Application in Biocomposites of Residual Microalgal Biomass Generated in Third Generation Biodiesel. https://app.cochat.ai/papers/10.1007/s10924-013-0609-8
- The paper
- Toro, C., Reddy, M. M., Navia, R., Rivas, M., Misra, M., & Mohanty, A. K. (2013). Characterization and Application in Biocomposites of Residual Microalgal Biomass Generated in Third Generation Biodiesel. Journal of Polymers and the Environment. https://doi.org/10.1007/s10924-013-0609-8
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.