The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Thermal conductivity and specific heat capacity measurements of Al2O3 nanofluids
Open accessAbstract
Thermal conductivities and specific heat capacities of nanoparticles of Al2O3 dispersed in water and ethylene glycol as a function of the particle volume fraction and at temperatures between 298 and 338 K were measured. The steady-state coaxial cylinders method, using a C80D microcalorimeter (Setaram, France) equipped with special calorimetric vessels, was used for the thermal conductivities measurements. The heat capacities were measured with a Micro DSC II microcalorimeter (Setaram, France) with batch cells designed in our laboratory and the “scanning or continuous method.” The Hamilton–Crosser model properly accounts for the thermal conductivity of the studied nanofluids. Assuming that the nanoparticles and the base fluid are in thermal equilibrium, the experimental specific heat capacities of nanofluids are correctly justified.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal Conductivity of Heterogeneous Two-Component Systems
Hamilton, R. L., & Crosser, O. K. (1962) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160003a005 · Cited by 3,672 · cited 4×
“Figure 9 shows the comparison of our experimental results of the thermal conductivity of Al2O3/water and Al2O3/EG nanofluids as a function of the temperature at different nanoparticle volume fractions with the predictions of the Hamilton–Crosser model.”
MethodInfluential
Cited by
Hemmat Esfe, M., Abbasian Arani, A. A., Rezaie, M., Yan, W.-M., & Karimipour, A. (2015) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2015.06.003 · Cited by 652
Qiu, L., Zhu, N., Feng, Y., Michaelides, E. E., Żyła, G., Jing, D., Zhang, X., Norris, P. M., Markides, C. N., & Mahian, O. (2020) · Physics Reports · doi:10.1016/j.physrep.2019.12.001 · Cited by 523
Said, Z., Sundar, L. S., Tiwari, A. K., Ali, H. M., Sheikholeslami, M., Bellos, E., & Babar, H. (2022) · Physics Reports · doi:10.1016/j.physrep.2021.07.002 · Cited by 391
Hemmat Esfe, M., Saedodin, S., Wongwises, S., & Toghraie, D. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-014-4328-8 · Cited by 309
Heat flow at nanoparticle interfaces
Warzoha, R. J., & Fleischer, A. S. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.03.014 · Cited by 144
Metadata
- Authors
- Barbés, B., Páramo, R., Blanco, E., Pastoriza-Gallego, M. J., Piñeiro, M. M., Legido, J. L., & Casanova, C.
- Venue
- Journal of Thermal Analysis and Calorimetry
- Published
- 2012-07-03
- Volume
- 111
- Issue
- 2
- Pages
- 1615-1625
- ISSN
- 1388-6150 (ISSN-L)
- 1572-8943
- OpenAlex
- W2947183082
- Cited by
- 163
- References
- 1
- FWCI
- 6.28
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.