A review on nonlinear energy sinks: designs, analysis and applications of impact and rotary types
Open accessThe DOI matches its Crossref record; 266 of the 269 references it cites were found in a registry or an index, and 1 are not checked yet; 1 of the 180 sources its claims cite were checked for support.
Abstract
Abstract Dynamical and structural systems are susceptible to sudden excitations and loadings such as wind gusts, blasts, earthquakes, and others which may cause destructive vibration amplitudes and lead to catastrophic impact on human lives and economy. Therefore, various vibration absorbers of linear and nonlinear coupling dynamics have been widely studied in plenty of publications where some have been applied in real-world practical applications. Firstly, the tuned-mass-damper (TMD), the first well-known linear vibration absorber that has been well-studied in the literature and applied with various structural and dynamical systems, is discussed. The linear vibration absorbers such as TMDs are widely used in real-life small- and large-scale structures due to their robust performance in vibration suppression of the low natural frequency structural modes. However, the TMD performs efficiently at narrowband frequency range where its performance is deteriorated by any changes in the frequency content in the structure and the TMD itself. Therefore, the targeted-energy-transfer mechanism which is found to be achieved by nonlinear energy sinks (NESs) has ignited the interest in passive nonlinear vibration suppression. Unlike TMDs, the NESs are dynamical vibration absorbers that achieve vibration suppression for wide range of frequency-energy levels. Given the very rapid growth in this field and the extensive research studies supporting the robustness of the NESs, this paper presents the different types of NESs and their applications with main emphasis on the rotary-based and impact-based NESs since they are of high impact in the literature due to their strong nonlinear dynamical behavior and robust targeted energy transfer.
Verified 2026-11-20 · 1 reference not checked yet
Overview
CoChat Summary
## TL;DR
This review surveys nonlinear energy sinks (NESs) with emphasis on rotary- and impact-based designs, explaining how they achieve targeted energy transfer (TET) and comparing them with tuned mass dampers (TMDs). The paper argues that vibro-impact and rotary NESs are generally more robust than TMDs for broadband, high-energy shocks and seismic loads, with single-sided vibro-impact NESs highlighted as especially effective.
## Key findings
- NESs achieve passive, broadband TET by nonlinear coupling; unlike TMDs, they are not limited to a narrow tuned frequency range and can transfer energy through multiple resonance captures on frequency-energy plots.
- For vibro-impact NESs (VI NESs), the paper identifies three main dissipation sources: NES viscous damping, energy loss from inelastic impacts, and structural modal damping.
- The review concludes that VI NESs have advantages such as simple implementation, fast reaction time, and high performance across wide input-energy ranges; for shock mitigation, single-sided vibro-impact (SSVI) NESs are reported to outperform double-sided vibro-impact (DSVI) NESs.
- The authors state that rotary NESs can provide performance comparable to or slightly better than some stiffness-based NESs, and they note experimental/numerical evidence of efficient energy scattering between structural modes.
- Reported application areas include aeroelastic flutter suppression, vortex-induced vibration control, chatter suppression, rotating machinery, spacecraft, beams, plates, and large-scale civil structures; the paper specifically mentions a large-scale 9-story structure with SSVI NESs subjected to real blast loading.
## Methods
- Narrative literature review of NES designs, analysis, and applications, with main emphasis on rotary-based and impact-based NESs.
- The review synthesizes prior analytical, numerical, and experimental studies across multiple excitation types, including periodic, impulsive, seismic, blast, and flutter-related loading.
- It compares performance using concepts and measures reported in the literature such as frequency-energy plots, nonlinear normal modes, slow invariant manifolds, wavelet spectra, and optimization criteria for energy dissipation/structural response.
## Limitations
- The paper states that systems coupled with vibro-impact NESs have very complex nonlinear dynamics that are difficult to analyze analytically without simplifications.
- The review notes that analytical work has mostly been limited to SDOF linear oscillators and DSVI NESs using the cavity model; multi-DOF systems and SSVI NES analytical treatment are said to be rarely considered or not considered.
- Evident from the text: this is a review article, so it does not present a single new dataset or controlled experiment of its own; the paper also states that no datasets were generated during the current study.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
1 Valid · 3 Not valid · 105 Not checked · 84 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“In this type of NES, the nonlinear magnetic repulsive force of permanent magnets is used as an alternative to the nonlinear spring elements to generate tunable symmetric and asymmetric nonlinear coupling force with the linear structure [113, 114]”
§ A review on nonlinear energy sinks: designs, analysis and applications of impact and rotary types > 3.4 Other kinds or modified NESs
What the sources say
- Not checked — no full text of the sourcecites [113] Al-Shudeifat, M.A.: Asymmetric magnet-based nonlinear energy sink. J. Comput. Nonlinear Dyn. 10, 1–4 (2014). https://doi.org/10.1115/1.4027462 source
- Partly supportedcites [114] Benacchio, S., Malher, A., Boisson, J., Touzé, C.: Design of a magnetic vibration absorber with tunable stiffnesses. Nonlinear Dyn. 85, 893–911 (2016). https://doi.org/10.1007/s11071-016-2731-3 sourceExperimental — accuracy not yet measured
Our copy of Benacchio et al. (2016) holds only the HAL record (hal-01286056) — the English Résumé, keywords and repository page chrome — with no section-labelled body text, so the abstract is the only substantive evidence. The Résumé supports the core attribution: an absorber 'completely relying on magnetic forces', with 'the ability of tuning the linear stiffness together with the nonlinear cubic and quintic stiffnesses by means of repulsive magnets located in the axis of the main vibrating magnetic mass, together with a set of corrective magnets located off the main axis', adjustable to work as a nonlinear energy sink (NES). What it does not state is the claim's 'symmetric and asymmetric' characterisation of the generated nonlinear coupling force: only cubic/quintic (symmetric-well) stiffnesses and a bi-stable case with negative linear stiffness are mentioned, and searches for asymmetric-potential wording returned no body passage. Searched: 'nonlinear energy sink magnetic repulsive force alternative to nonlinear spring', 'asymmetric potential ... off axis corrective magnets', 'multipole expansion ... stiffness'. (LLM, conf=0.66)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“with the exception of [231], no work considered the implementation of DSVI NES for large-scale structures analytically, numerically or experimentally.”
§ A review on nonlinear energy sinks: designs, analysis and applications of impact and rotary types > 5.4 Tested structures
What the sources say
- Not checked — no full text of the sourcecites [231] Ahmadi, M., Attari, N.K.A., Shahrouzi, M.: Structural seismic response mitigation using optimized vibro-impact nonlinear energy sinks. J. Earthq. Eng. 19, 193–219 (2015). https://doi.org/10.1080/13632469.2014.962671 source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“In all publications in that regard, the evaluation criteria related to the maximum absolute, normed acceleration, and inertial force were not considered in the objective function because the strong ground motion and the strong impacts caused by the NESs induce high accelerations and forces to the associated floors and are therefore inadequate efficiency measures.”
§ A review on nonlinear energy sinks: designs, analysis and applications of impact and rotary types > 5.8 Efficiency measures and optimization procedures
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“From the review conducted, it was observed that all the works related to the analytical treatment of VI NESs consider a SDOF linear oscillator.”
§ A review on nonlinear energy sinks: designs, analysis and applications of impact and rotary types > 5.5 Analytical treatment
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A claim is checked only against the cited paper’s full text, never its abstract, and none is available for its sources.
In the paper
“To the author's knowledge, the largest test bed for TET testing is the 11-ton 9-story steel frame structure investigated in [106,109,110] for seismic and shock mitigations using SSVI NESs and Type I NESs.”
§ A review on nonlinear energy sinks: designs, analysis and applications of impact and rotary types > 5.7 Experimental validations
What the sources say
- Not checked — no full text of the sourcecites [106] AL-Shudeifat, M.A., Vakakis, A.F., Bergman, L.A.: Shock mitigation by means of low- to high-frequency nonlinear targeted energy transfers in a large-scale structure. J. Comput. Nonlinear Dyn. 11, 32 (2015). https://doi.org/10.1115/1.4030540 source
- Not checked — no full text of the sourcecites [109] Luo, J., Wierschem, N.E., Hubbard, S.A., Fahnestock, L.A., Dane Quinn, D., Michael McFarland, D., Spencer, B.F., Vakakis, A.F., Bergman, L.A.: Large-scale experimental evaluation and numerical simulation of a system of nonlinear energy sinks for seismic mitigation. Eng. Struct. 77, 34–48 (2014). https://doi.org/10.1016/j.engstruct.2014.07.020 source
- Not checked — no full text of the sourcecites [110] Wierschem, N.E., Hubbard, S.A., Luo, J., Fahnestock, L.A., Spencer, B.F., McFarland, D.M., Quinn, D.D., Vakakis, A.F., Bergman, L.A.: Response attenuation in a large-scale structure subjected to blast excitation utilizing a system of essentially nonlinear vibration absorbers. J. Sound Vib. 389, 52–72 (2017). https://doi.org/10.1016/j.jsv.2016.11.003 source
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
123 more claims
Create a free account to see all 193 claims and to verify the 27 references still open.
- It may state two separate claims as one. 52
- Probably not a substantial claim. 18
Citations
Cites
Storn, R., & Price, K. (1997) · Journal of Global Optimization · doi:10.1023/a:1008202821328 · Cited by 29,569
A Simplex Method for Function Minimization
Nelder, J. A., & Mead, R. (1965) · The Computer Journal · doi:10.1093/comjnl/7.4.308 · Cited by 28,905
Particle swarm optimization: An overview
Poli, R., Kennedy, J., & Blackwell, T. (2007) · Swarm Intelligence · doi:10.1007/s11721-007-0002-0 · Cited by 21,101
Nonlinear Oscillations, Dynamical Systems, and Bifurcations of Vector Fields
Guckenheimer, J., & Holmes, P. (1983) · Applied Mathematical Sciences · doi:10.1007/978-1-4612-1140-2 · Cited by 16,144
Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe
Tsuji, Y., Tanaka, T., & Ishida, T. (1992) · Powder Technology · doi:10.1016/0032-5910(92)88030-l · Cited by 2,147
Lee, K. S., & Geem, Z. W. (2005) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2004.09.007 · Cited by 1,772
Nonlinear Oscillations Dynamical Systems, and Bifurcations of Vector Fields
Guckenheimer, J., Holmes, P., & Slemrod, M. (1984) · Journal of Applied Mechanics · doi:10.1115/1.3167759 · Cited by 1,259
Supplemental energy dissipation: state-of-the-art and state-of-the-practice
Soong, T. T., & Spencer, B. F. (2002) · Engineering Structures · doi:10.1016/s0141-0296(01)00092-x · Cited by 1,220 · cited 2×
“Given the simple implementation and widespread acceptance by the engineering community, passive control systems have been increasingly implemented in many structures [17].”
BackgroundP., A. L. (1948) · Nature · doi:10.1038/161503c0 · Cited by 1,015
A periodically forced piecewise linear oscillator
Shaw, S. W., & Holmes, P. J. (1983) · Journal of Sound and Vibration · doi:10.1016/0022-460x(83)90407-8 · Cited by 887
Research works printed but not linked: 7
- Farquharson, F.B.: Aerodynamic Stability of Suspension Bridges with Special Reference to Tacoma Narrows Bridge—1. University of Washington Press, Washington (1949)
- Guha-Sapir, D., Vos, F., Below, R.: Annual Disaster Statistical Review 2011 The numbers and trends (2011)
- Dallard, P., Fitzpatrick, A.I., Flint, A., Le Bourva, S., Low, A., R.S.: The London millennium footbridge. Struct. Eng. 79, 17–33 (2001)
- Lu, J.W., Wierschem, N.E., Spencer, B.F.: Track nonlinear energy sink for rapid response reduction in building structures. J. Eng. Mech. 141, 04014104 (2015)
- Rusakov, I.G., Kharkevich, A.A.: Excited vibration of the system impacting against the stop. J. Tech. Phys. 12, 1–12 (1942)
- Engleder, T., Vielsack, P., Spiess, H.: Damping by impacts, an application of non-smooth dynamics. In: Proceedings of the Conference on Nonlinear Oscillations in Mechanical Systems, pp. 134–144 (1998)
- Spencer Jr, B.F., Christenson, R.E., Dyke, S.J.: Next generation benchmark control problem for seismically excited buildings. In: Proceedings of the Second World Conference on Structural Control. pp. 1135–1360 (1998)
Cited by
Bounemeur, A., & Chemachema, M. (2025) · International Journal of Systems Science · doi:10.1080/00207721.2024.2409853 · Cited by 265
Quasi-zero-stiffness vibration isolation: Designs, improvements and applications
Liu, C., Zhang, W., Yu, K., Liu, T., & Zheng, Y. (2024) · Engineering Structures · doi:10.1016/j.engstruct.2023.117282 · Cited by 247
A state-of-the-art review on the dynamic design of nonlinear energy sinks
Geng, X.-F., Ding, H., Ji, J.-C., Wei, K.-X., Jing, X.-J., & Chen, L.-Q. (2024) · Engineering Structures · doi:10.1016/j.engstruct.2024.118228 · Cited by 185
Zhang, H., Wang, L., & Shi, W. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.107549 · Cited by 122
A magnetic nonlinear energy sink with quasi-zero stiffness characteristics
Liu, X.-C., Ding, H., Geng, X., Wei, K., Lai, S.-K., & Chen, L. (2024) · Nonlinear Dynamics · doi:10.1007/s11071-024-09379-0 · Cited by 76
Metadata
- Authors
- Saeed, A. S., Abdul Nasar, R., & AL-Shudeifat, M. A.
- Affiliations
- Khalifa University of Science and Technology (AE)
- Corresponding author
- AL-Shudeifat, Mohammad A.
- Venue
- Nonlinear Dynamics
- Published
- 2022-11-22
- Volume
- 111
- Issue
- 1
- Pages
- 1-37
- ISSN
- 0924-090X (ISSN-L)
- 1573-269X
- OpenAlex
- W4309673492
- Cited by
- 208
- References
- 245
- Citations by year
- 2026: 61 · 2025: 57 · 2024: 70 · 2023: 19 · 2022: 1
- FWCI
- 16.53
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- Nonlinear Dynamics (publishedVersion, cc-by)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Vibration Control and Rheological Fluids
- Physical Sciences › Engineering › Mechanical Engineering › Vibration and Dynamic Analysis
- Physical Sciences › Engineering › Mechanical Engineering › Innovative Energy Harvesting Technologies
- Keywords
- nonlinear energy sink, targeted energy transfer, passive vibration control, tuned mass damper, structural vibration, impact loading
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A review on nonlinear energy sinks: designs, analysis and applications of impact and rotary types. https://app.cochat.ai/papers/10.1007/s11071-022-08094-y
- The paper
- Saeed, A. S., Abdul Nasar, R., & AL-Shudeifat, M. A. (2023). A review on nonlinear energy sinks: designs, analysis and applications of impact and rotary types. Nonlinear Dynamics. https://doi.org/10.1007/s11071-022-08094-y
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.