CoChat

The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.

The ecoinvent database version 3 (part II): analyzing LCA results and comparison to version 2

Open access
Steubing, Bernhard, Wernet, Gregor, Reinhard, Jürgen, Bauer, Christian, Moreno-Ruiz, Emilia · 2016 · The International Journal of Life Cycle Assessment

Abstract

Version 3 of ecoinvent includes more data, new modeling principles, and, for the first time, several system models: the “Allocation, cut-off by classification” (Cut-off) system model, which replicates the modeling principles of version 2, and two newly introduced models called “Allocation at the point of substitution” (APOS) and “Consequential” (Wernet et al. 2016 ). The aim of this paper is to analyze and explain the differences in life cycle impact assessment (LCIA) results of the v3.1 Cut-off system model in comparison to v2.2 as well as the APOS and Consequential system models. In order to do this, functionally equivalent datasets were matched across database versions and LCIA results compared to each other. In addition, the contribution of specific sectors was analyzed. The importance of new and updated data as well as new modeling principles is illustrated through examples. Differences were observed in between all database versions using the impact assessment methods Global Warming Potential (GWP100a), ReCiPe Endpoint (H/A), and Ecological Scarcity 2006 (ES’06). The highest differences were found for the comparison of the v3.1 Cut-off and v2.2. At average, LCIA results increased by 6, 8, and 17 % and showed a median dataset deviation of 13, 13, and 21 % for GWP, ReCiPe, and ES’06, respectively. These changes are due to the simultaneous update and addition of new data as well as through the introduction of global coverage and spatially consistent linking of activities throughout the database. As a consequence, supply chains are now globally better represented than in version 2 and lead, e.g., in the electricity sector, to more realistic life cycle inventory (LCI) background data. LCIA results of the Cut-off and APOS models are similar and differ mainly for recycling materials and wastes. In contrast, LCIA results of the Consequential version differ notably from the attributional system models, which is to be expected due to fundamentally different modeling principles. The use of marginal instead of average suppliers in markets, i.e., consumption mixes, is the main driver for result differences. LCIA results continue to change as LCI databases evolve, which is confirmed by a historical comparison of v1.3 and v2.2. Version 3 features more up-to-date background data as well as global supply chains and should, therefore, be used instead of previous versions. Continuous efforts will be required to decrease the contribution of Rest-of-the-World (RoW) productions and thereby improve the global coverage of supply chains.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1007/s11367-016-1109-6

Cites

18 of 18 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 18 references

Research works printed but not linked: 3

  1. Frischknecht R, Steiner R, Jungbluth N (2008) The Ecological Scarcity Method–Eco-Factors 2006. Federal Office for the Environment FOEN, Bern, p 188
  2. Goedkoop M, Heijungs R, Huijbregts MAJ, de Schryver A, Struijs J, van Zelm R (2009) ReCiPe 2008, a life cycle impact assessment method which comprises harmonised category indicators at the midpoint and the endpoint level. Report I: Characterisation. PRé Consultants, Amersfoort, Netherlands, p 132
  3. ISO (2006) ISO 14044: environmental management, life cycle assessment, requirements and guidelines. International Standardization Organization, Geneva, p 56

Cited by

See all 181

Metadata

Authors
Steubing, B., Wernet, G., Reinhard, J., Bauer, C., & Moreno-Ruiz, E.
Affiliations
  • Leiden University (NL)
  • University of Zurich (CH)
  • Paul Scherrer Institute (CH)
Corresponding author
Steubing, Bernhard
Venue
The International Journal of Life Cycle Assessment
Published
2016-04-21
Volume
21
Issue
9
Pages
1269-1281
ISSN
  • 0948-3349 (ISSN-L)
  • 1614-7502
OpenAlex
W2339395886
Cited by
181
References
18
Citations by year
2026: 26 · 2025: 24 · 2024: 20 · 2023: 16 · 2022: 20 · 2021: 26 · 2020: 14 · 2019: 14 · 2018: 14 · 2017: 4 · 2016: 3
FWCI
7.29
Type
journal article
Language
en
Open access
Locations
  • The International Journal of Life Cycle Assessment (publishedVersion, cc-by)
  • Leiden Repository (Leiden University) (submittedVersion, cc-by)
  • DORA PSI (Paul Scherrer Institute) (submittedVersion, cc-by)
  • Leiden Repository (Leiden University) (submittedVersion)
  • Repository for Publications and Research Data (ETH Zurich) (submittedVersion, cc-by)
  • Data Archiving and Networked Services (DANS) (submittedVersion, other-oa)
  • ETH Zürich Research Collection
Topics
  • Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
  • Physical Sciences › Environmental Science › Ecology › Agriculture Sustainability and Environmental Impact
  • Physical Sciences › Environmental Science › Environmental Engineering › Sustainability and Ecological Systems Analysis
Keywords
Ecoinvent database, life cycle inventory databases, global supply chains, consumption mix, global warming potential, recipes

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: The ecoinvent database version 3 (part II): analyzing LCA results and comparison to version 2. https://app.cochat.ai/papers/10.1007/s11367-016-1109-6
The paper
Steubing, B., Wernet, G., Reinhard, J., Bauer, C., & Moreno-Ruiz, E. (2016). The ecoinvent database version 3 (part II): analyzing LCA results and comparison to version 2. The International Journal of Life Cycle Assessment. https://doi.org/10.1007/s11367-016-1109-6

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.