The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Effectiveness of medical equipment donations to improve health systems: how much medical equipment is broken in the developing world?
Open accessAbstract
It is often said that most of the medical equipment in the developing world is broken with estimates ranging up to 96% out of service. But there is little documented evidence to support these statements. We wanted to quantify the amount of medical equipment that was out of service in resource poor health settings and identify possible causes. Inventory reports were analyzed from 1986 to 2010, from hospitals in sixteen countries across four continents. The UN Human Development Index was used to determine which countries should be considered developing nations. Non-medical hospital equipment was excluded. This study examined 112,040 pieces of equipment. An average of 38.3% (42,925, range across countries: 0.83-47%) in developing countries was out of service. The three main causes were lack of training, health technology management, and infrastructure. We hope that the findings will help biomedical engineers with their efforts toward effective designs for the developing world and NGO's with efforts to design effective healthcare interventions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“As a result, 40% of medical equipment in LMICs is out of service (4).”
From Artificial intelligence for global health (2019) · cites this paper as [4]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design of Health Care Technologies for the Developing World
Malkin, R. A. (2007) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.9.060906.151913 · Cited by 161
Self-citationMalkin, R. A., & Keane, A. (2010) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-010-0630-1 · Cited by 74
Self-citationMedical Technology and Developing Countries: The Case of Brazil
Banta, H. D. (1986) · International Journal of Health Services · doi:10.2190/7h41-xeeb-aqyy-0cn6 · Cited by 28
Distributing and Transferring Medical Technology
Peña-Mohr, J. (1987) · International Journal of Technology Assessment in Health Care · doi:10.1017/s026646230000057x · Cited by 22
Health Care Technology Transfer in Latin America and the Caribbean
Coe, G., & Banta, D. (1992) · International Journal of Technology Assessment in Health Care · doi:10.1017/s0266462300013489 · Cited by 20
Kaunonen, G. (2010) · IEEE Pulse · doi:10.1109/mpul.2010.938710 · Cited by 11
Bracale, M., & Pepino, A. (1994) · Medical & Biological Engineering & Computing · doi:10.1007/bf02518909 · Cited by 8
Technical services for healthcare facilities: a model for developing countries
Frize, M., & Cheng, M. S. P. (1994) · Medical & Biological Engineering & Computing · doi:10.1007/bf02512533 · Cited by 4
Health Care and Medical Technology in Nigeria: An Appraisal
Erinosho, O. A. (1991) · International Journal of Technology Assessment in Health Care · doi:10.1017/s0266462300007108 · Cited by 4
Cited by
Sorted by citations
Global Surgery 2030: evidence and solutions for achieving health, welfare, and economic development
Meara, J. G., Leather, A. J. M., Hagander, L., Alkire, B. C., Alonso, N., Ameh, E. A., Bickler, S. W., Conteh, L., Dare, A. J., Davies, J., et al. (2015) · The Lancet · doi:10.1016/s0140-6736(15)60160-x · Cited by 3,851
The Lancet Commission on diagnostics: transforming access to diagnostics
Fleming, K. A., Horton, S., Wilson, M. L., Atun, R. A., DeStigter, K. K., Flanigan, J. S., Sayed, S., Adam, P., Aguilar, B., Andronikou, S., et al. (2021) · The Lancet · doi:10.1016/s0140-6736(21)00673-5 · Cited by 506
Technologies for global health
Howitt, P. J., Darzi, A. W., Yang, G., Ashrafian, H., Atun, R. A., Barlow, J. G., Blakemore, A. I. F., Bull, A. M. J., Car, J., Conteh, L., et al. (2012) · The Lancet · doi:10.1016/s0140-6736(12)61127-1 · Cited by 405
Self-citationSecuring internet of medical things systems: limitations, issues and recommendations
Yaacoub, J.-P. A., Noura, M., Noura, H. N., Salman, O., Yaacoub, E., Couturier, R., & Chehab, A. (2020) · Future Generation Computer Systems · doi:10.1016/j.future.2019.12.028 · Cited by 308
Heidt, B., Siqueira, W. F., Eersels, K., Diliën, H., van Grinsven, B., Fujiwara, R. T., & Cleij, T. J. (2020) · Biosensors · doi:10.3390/bios10100133 · Cited by 298
Health systems, systems thinking and innovation
Atun, R. A. (2012) · Health Policy and Planning · doi:10.1093/heapol/czs088 · Cited by 282
Towards design strategies for circular medical products
Kane, G. M., Bakker, C. A., & Balkenende, R. (2017) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2017.07.030 · Cited by 209
Artificial intelligence for global health
Hosny, A., & Aerts, H. J. W. L. (2019) · Science · doi:10.1126/science.aay5189 · Cited by 177
Global Surgery 2030: a roadmap for high income country actors
Ng-Kamstra, J. S., Greenberg, S. L. M., Abdullah, F., Amado, V., Anderson, G. A., Cossa, M., Costas‐Chavarri, A., Davies, J. I., Debas, H. T., Dyer, G. S. M., et al. (2016) · BMJ Global Health · doi:10.1136/bmjgh-2015-000011 · Cited by 171
Marks, I. H., Thomas, H. S., Bakhet, M., & Fitzgerald, J. E. F. (2019) · BMJ Global Health · doi:10.1136/bmjgh-2019-001785 · Cited by 144
Haves and have nots must find a better way: The case for open scientific hardware
Chagas, A. M. (2018) · PLoS Biology · doi:10.1371/journal.pbio.3000014 · Cited by 119
Diaconu, K., Chen, Y., Cummins, C., Moyao, G. J., Manaseki‐Holland, S., & Lilford, R. J. (2017) · Globalization and Health · doi:10.1186/s12992-017-0280-2 · Cited by 118
Medical Device Product Innovation Choices in Asia: An Empirical Analysis Based on Product Space
Hu, F., Qiu, L., & Zhou, H. (2022) · Frontiers in Public Health · doi:10.3389/fpubh.2022.871575 · Cited by 95
Open hardware: From DIY trend to global transformation in access to laboratory equipment
Wenzel, T. (2023) · PLoS Biology · doi:10.1371/journal.pbio.3001931 · Cited by 89
Raykar, N. P., Yorlets, R. R., Liu, C., Goldman, R. E., Greenberg, S. L. M., Kotagal, M., Farmer, P. E., Meara, J. G., Roy, N., & Gillies, R. (2016) · BMJ Global Health · doi:10.1136/bmjgh-2016-000075 · Cited by 81
Olson, K. R., Walsh, M., Garg, P., Steel, A., Mehta, S., Santorino, D., Petersen, R., GUARINO, A. J., Bailey, E., & Bangsberg, D. R. (2017) · BMJ Innovations · doi:10.1136/bmjinnov-2016-000147 · Cited by 77
Chakravarty, S. (2021) · Technovation · doi:10.1016/j.technovation.2021.102397 · Cited by 76
Circular business models in the medical device industry: paths towards sustainable healthcare
Guzzo, D., de Carvalho, M. M., Balkenende, R., & Mascarenhas, J. (2020) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2020.104904 · Cited by 90
Disseminating technology in global surgery
Bolton, W. S., Aruparayil, N., Quyn, A. J., Scott, J., Wood, A. M., Bundu, I., Gnanaraj, J., Brown, J. M., & Jayne, D. G. (2019) · British journal of surgery · doi:10.1002/bjs.11036 · Cited by 66
Sustainable low-field cardiovascular magnetic resonance in changing healthcare systems
Qin, C., Murali, S., Lee, E., Supramaniam, V., Hausenloy, D. J., Obungoloch, J., Brecher, J., Lin, R., Ding, H., Akudjedu, T. N., et al. (2021) · European Heart Journal - Cardiovascular Imaging · doi:10.1093/ehjci/jeab286 · Cited by 65
Albutt, K. H., Yorlets, R. R., Punchak, M. A., Kayima, P., Namanya, D. B., Anderson, G. A., & Shrime, M. G. (2018) · PLoS ONE · doi:10.1371/journal.pone.0195986 · Cited by 57
Xu, S., Rwei, A. Y., Vwalika, B., Chisembele, M. P., Stringer, J. S. A., Ginsburg, A. S., & Rogers, J. A. (2021) · The Lancet Digital Health · doi:10.1016/s2589-7500(21)00001-7 · Cited by 57
Morgan, V., Casso-Hartmann, L., Bahamón-Pinzón, D., McCourt, K. M., Hjort, R. G., Bahramzadeh, S., Vélez‐Torres, I., McLamore, E. S., Gomes, C. L., Alocilja, E. C., et al. (2020) · Diagnostics · doi:10.3390/diagnostics10010022 · Cited by 53
The Growth of Neurosurgery in East Africa: Challenges
Santos, M. M., Qureshi, M. M., Budohoski, K. P., Mangat, H. S., Ngerageza, J. G., Schöller, K., Shabani, H. K., Zubkov, M. R., & Härtl, R. (2018) · World Neurosurgery · doi:10.1016/j.wneu.2018.01.084 · Cited by 47
Albert, V., Mndolo, S. K., Harrison, E. M., O’Sullivan, E., Wilson, I. H., & WALKER, I. A. (2017) · Anaesthesia · doi:10.1111/anae.13838 · Cited by 43
Ademe, B. W., Tebeje, B., & Assaye, A. M. (2016) · BMC Health Services Research · doi:10.1186/s12913-016-1523-2 · Cited by 42
Ssekitoleko, R., Oshabaheebwa, S., Munabi, I., Tusabe, M. S., Namayega, C., Ngabirano, B. A., Matovu, B., Mugaga, J., Reichert, W., & Joloba, M. (2020) · BMC Public Health · doi:10.1186/s12889-020-09662-w · Cited by 29
Dada, S., Ashworth, H. C., Sobitschka, A., Raguveer, V., Sharma, R., Hamilton, A. R. L., & Burke, T. F. (2021) · PLoS ONE · doi:10.1371/journal.pone.0252718 · Cited by 40
Qin, R. X., Velin, L., Yates, E. F., Omrani, O. E., McLeod, E. J., Tudravu, J., Samad, L., Woodward, A. J., & McClain, C. D. (2022) · The Lancet Regional Health - Western Pacific · doi:10.1016/j.lanwpc.2022.100407 · Cited by 43
Finch, L. C., Kim, R. Y., Ttendo, S. S., Kiwanuka, J. K., WALKER, I. A., Wilson, I. H., Weiser, T. G., Berry, W. R., & Gawande, A. A. (2014) · Anaesthesia · doi:10.1111/anae.12632 · Cited by 37
Houngbo, P. T., Coleman, H. L. S., Zweekhorst, M. B. M., Buning, T. D. C., Médénou, D., & Bunders, J. (2017) · PLoS ONE · doi:10.1371/journal.pone.0168842 · Cited by 37
Oxygen Availability and Nursing Capacity for Oxygen Therapy in Ugandan Paediatric Wards
Nabwire, J., Namasopo, S., & Hawkes, M. (2017) · Journal of Tropical Pediatrics · doi:10.1093/tropej/fmx033 · Cited by 35
Global Surgical Ecosystems: A Need for Systems Strengthening
deVries, C. R., & Rosenberg, J. S. (2016) · Annals of Global Health · doi:10.1016/j.aogh.2016.09.011 · Cited by 34
Medical device landscape for communicable and noncommunicable diseases in low-income countries
Sarvestani, A. S., & Sienko, K. H. (2018) · Globalization and Health · doi:10.1186/s12992-018-0355-8 · Cited by 33
Accessing medical equipment in developing countries through remanufacturing
Eze, S., Ijomah, W., & Wong, T. C. (2019) · Journal of remanufacturing · doi:10.1007/s13243-018-0065-7 · Cited by 32
Diffusion of Novel Healthcare Technologies to Resource Poor Settings
Malkin, R. A., & Beer, K. V. O. (2013) · Annals of Biomedical Engineering · doi:10.1007/s10439-013-0750-5 · Cited by 30
Self-citationGlobal health front-end medical device design: The use of prototypes to engage stakeholders
Coulentianos, M. J., Rodríguez-Calero, I., Daly, S. R., & Sienko, K. H. (2020) · Development Engineering · doi:10.1016/j.deveng.2020.100055 · Cited by 31
Shakir, M., Shariq, S. F., Irshad, H. A., Khowaja, A. H., Tahir, I., Rae, A. I., Hamzah, R., Gupta, S., Park, K. B., & Enam, S. A. (2024) · World Neurosurgery · doi:10.1016/j.wneu.2024.05.044 · Cited by 26
Mixed-methods assessment of surgical capacity in two regions in Ethiopia
Iverson, K. R., Garringer, K., Ahearn, O., Alidina, S., Citron, I., Esseye, S., Teshome, A., Mukhopadhyay, S., Burssa, D., Collaborators, S. S. 2., et al. (2019) · British journal of surgery · doi:10.1002/bjs.11032 · Cited by 27
Caldwell, A., Young, A. K., Gómez-Márquez, J., & Olson, K. R. (2011) · IEEE Pulse · doi:10.1109/mpul.2011.941459 · Cited by 24
(2013) · Journal of remanufacturing · doi:10.1007/13243.2210-4690 · Cited by 24
Effective Medical Surplus Recovery
Atasu, A., Toktay, L. B., Yeo, W. M., & Zhang, C. (2016) · Production and Operations Management · doi:10.1111/poms.12641 · Cited by 23
Nwadiuko, J., James, K., Switzer, G. E., & Stern, J. (2016) · Globalization and Health · doi:10.1186/s12992-016-0165-9 · Cited by 24
Health care during electricity failure: The hidden costs
Mechtenberg, A. R., McLaughlin, B., DiGaetano, M., Awodele, A., Omeeboh, L., Etwalu, E., Nanjula, L., Musaazi, M. K., & Shrime, M. G. (2020) · PLoS ONE · doi:10.1371/journal.pone.0235760 · Cited by 22
Hauner, A., Onwuchekwa, C., & Ariën, K. K. (2024) · Expert Review of Molecular Diagnostics · doi:10.1080/14737159.2024.2353690 · Cited by 20
Malkin, R. A., & Whittle, C. (2013) · Journal of Clinical Engineering · doi:10.1097/jce.0000000000000008 · Cited by 20
Self-citationOosting, R. M., Wauben, L. S. G. L., Madete, J., Groen, R. S., & Dankelman, J. (2020) · BJS Open · doi:10.1002/bjs5.50255 · Cited by 19
Thapa, R., Yih, A., Chauhan, A. K., Poudel, S., Singh, S., Shrestha, S. M., Tamang, S., Shrestha, R., & Rajbhandari, R. (2022) · Human Resources for Health · doi:10.1186/s12960-022-00719-y · Cited by 19
Kabeta, S. H., Chala, T. K., & Tafese, F. (2023) · Medical Devices Evidence and Research · doi:10.2147/mder.s398933 · Cited by 19
Bauserman, M., Hailey, C. E., Gado, J., Lokangaka, A. L., Williams, J., Richards-Kortum, R. R., Tshefu, A. K., & Bose, C. L. (2014) · International Health · doi:10.1093/inthealth/ihu091 · Cited by 19
Fleischer, J. C., Diehl, J. C., Wauben, L. S. G. L., & Dankelman, J. (2020) · Journal of Medical Devices · doi:10.1115/1.4046120 · Cited by 18
Remanufacturing: a potential sustainable solution for increasing medical equipment availability
Eze, S., Ijomah, W., & Wong, T. C. (2020) · Journal of remanufacturing · doi:10.1007/s13243-020-00080-0 · Cited by 18
Nigatu, A. M., Yilma, T. M., Gezie, L. D., Gebrewold, Y., Gullslett, M. K., Mengiste, S. A., & Tilahun, B. C. (2023) · BMC Health Services Research · doi:10.1186/s12913-023-09652-9 · Cited by 20
Medical missions for the provision of paediatric cardiac surgery in low- and middle-income countries
Molloy, F., Nguyen, N., Mize, M., Wright, G., George-Hyslop, C. S., O’Callaghan, M., Scanlan, E., & Novick, W. M. (2017) · Cardiology in the Young · doi:10.1017/s104795111700261x · Cited by 17
Excess COVID-19 mortality among critically ill patients in Africa
Kirenga, B., & Byakika‐Kibwika, P. (2021) · The Lancet · doi:10.1016/s0140-6736(21)00576-6 · Cited by 17
Medical device procurement in low- and middle-income settings: protocol for a systematic review
Diaconu, K., Chen, Y., Manaseki‐Holland, S., Cummins, C., & Lilford, R. J. (2014) · Systematic Reviews · doi:10.1186/2046-4053-3-118 · Cited by 16
Nasir, N., Molyneux, S. C., Were, F., Aderoba, A. K., & Fuller, S. (2023) · BMJ Global Health · doi:10.1136/bmjgh-2023-012308 · Cited by 28
Asma, E., Heenan, M., Banda, G., Kirby, R. P., Mangwiro, L., Acemyan, C. Z., Palamountain, K. M., Kortum, P. T., Kawaza, K., Oden, Z. M., et al. (2023) · BMC Pediatrics · doi:10.1186/s12887-023-04362-x · Cited by 16
Cherie, N., Deress, T., Berta, D. M., Chane, E., Teketelew, B. B., Adane, K., & Nigus, M. (2024) · Risk Management and Healthcare Policy · doi:10.2147/rmhp.s453020 · Cited by 19
Samenjo, K. T., Oosting, R. M., Bakker, C. A., & Diehl, J. C. (2023) · Frontiers in Sustainability · doi:10.3389/frsus.2023.1079685 · Cited by 17
Emmerling, D., Dahinten, A. P., & Malkin, R. A. (2017) · Health and Technology · doi:10.1007/s12553-017-0210-6 · Cited by 14
Self-citationBarkley, A. S., Spece, L. J., Barros, L. M., Bonow, R. H., Ravanpay, A. C., Ellenbogen, R. G., Huoy, P., Thy, T., Sothea, S., Pak, S., et al. (2019) · Journal of neurosurgery · doi:10.3171/2019.10.jns192118 · Cited by 14
Tarus, A., Msemo, G., Kamuyu, R., Shamba, D. D., Kirby, R. P., Palamountain, K. M., Gicheha, E., Kumar, M. B., Powell‐Jackson, T., Bohne, C. A., et al. (2023) · BMC Pediatrics · doi:10.1186/s12887-023-04363-w · Cited by 13
Lilford, R. J., Burn, S. L., Diaconu, K., Lilford, P., Chilton, P. J., Bion, V., Cummins, C., & Manaseki‐Holland, S. (2015) · Cost Effectiveness and Resource Allocation · doi:10.1186/s12962-014-0027-3 · Cited by 13
Addressing mass-customization trade-offs in bottom of the pyramid markets
Ahrens, F., Dobrzykowski, D. D., & Sawaya, W. J. (2018) · International Journal of Physical Distribution & Logistics Management · doi:10.1108/ijpdlm-02-2018-0048 · Cited by 13
Webb, M. M., Bridges, P., Aruparayil, N., Chugh, C., Beacon, T., Singh, T., Sawhney, S. S., Bains, L., Hall, R., Jayne, D. G., et al. (2022) · IEEE Journal of Translational Engineering in Health and Medicine · doi:10.1109/jtehm.2022.3177313 · Cited by 12
Geta, E. T., Terefa, D. R., & Desisa, A. E. (2023) · Medical Devices Evidence and Research · doi:10.2147/mder.s401041 · Cited by 12
Wilson, P. T., Benckert, M., Moresky, R. T., & Morris, M. C. (2016) · Journal of Tropical Pediatrics · doi:10.1093/tropej/fmw096 · Cited by 12
Enhancing skills to promote the utilization of medical laboratory equipment in low resource settings
Oshabaheebwa, S., Namuli, L. K., Tusabe, M. S., Nantume, J., Ackers, L., & Ssekitoleko, R. (2020) · Health Policy and Technology · doi:10.1016/j.hlpt.2020.01.001 · Cited by 12
Enright, K. (2021) · BMJ Global Health · doi:10.1136/bmjgh-2020-004339 · Cited by 12
Tang, C., Guss, D., Tanaka, M. J., & Lubberts, B. (2021) · Clinical Imaging · doi:10.1016/j.clinimag.2021.10.002 · Cited by 12
Evaluating a computerized maintenance management system in a low resource setting
Beniacoub, F., Ntwari, F., Niyonkuru, J.-P., Nyssen, M., & Bastelaere, S. V. (2021) · Health and Technology · doi:10.1007/s12553-021-00524-y · Cited by 11
Shakir, M., Khowaja, A. H., Irshad, H. A., Tahir, I., Shariq, S. F., Rae, A. I., Hamzah, R., Gupta, S., Park, K. B., & Enam, S. A. (2024) · World Neurosurgery · doi:10.1016/j.wneu.2024.10.104 · Cited by 11
Samenjo, K. T., Ramanathan, A. R., Gwer, S. O., Bailey, R. C., Otieno, F., Koksal, E., Sprecher, B., Price, R. A., Bakker, C. A., & Diehl, J. C. (2023) · Frontiers in Medical Technology · doi:10.3389/fmedt.2023.1183179 · Cited by 11
Possible, Filkins, M., Halliday, S., Daniels, B., Bista, R., Thapa, S., Schwarz, R. K., Schwarz, D., Gauchan, B., & Maru, D. (2015) · Journal of Global Radiology · doi:10.7191/jgr.2015.1001 · Cited by 11
Ssekitoleko, R., Arinda, B. N., Oshabaheebwa, S., Namuli, L. K., Mugaga, J., Namayega, C., Opolot, E. E., Baluka, J. W., Ibingira, C., Munabi, I. G., et al. (2022) · Global Clinical Engineering Journal · doi:10.31354/globalce.v4i3.127 · Cited by 11
Haves and Have nots must find a better way: The case for Open Scientific HardwarePreprint
Chagas, A. M. (2018) · doi:10.31219/osf.io/uh682 · Cited by 11
Kendall, E. A., Hussain, H., Kunkel, A., Kubiak, R. W., Trajman, A., Menzies, R., & Drain, P. K. (2021) · BMC Medicine · doi:10.1186/s12916-021-02189-w · Cited by 10
Diagnosis and Management of Cryptococcal Disease in Resource-Limited Settings
Vanselow, M. S., Brandt, M. E., & Park, B. J. (2012) · Current Fungal Infection Reports · doi:10.1007/s12281-011-0082-6 · Cited by 10
Delivery of Subspecialty Surgical Care in Low-Resource Settings
White, R. E., & Parker, R. K. (2017) · Springer eBooks · doi:10.1007/978-3-319-49482-1_5 · Cited by 10
Utomo, M. T., Sampurna, M. T. A., Melisa, M., Permana, P. B. D., Albright, I. A., Etika, R., Angelika, D., Handayani, K. D., & Irzaldy, A. (2022) · F1000Research · doi:10.12688/f1000research.109105.1 · Cited by 10
Service-Learning in Biomedical Engineering: Engineering World Health (EWH)
Malkin, R. A., & Calman, L. J. (2014) · International Journal for Service Learning in Engineering Humanitarian Engineering and Social Entrepreneurship · doi:10.24908/ijsle.v0i0.5542 · Cited by 9
Self-citationHearing aid or “band aid”? Evaluating large scale hearing aid donation programmes in the Philippines
Newall, J. P., Biddulph, R., Ramos, H. D., & Kwok, C. (2019) · International Journal of Audiology · doi:10.1080/14992027.2019.1666308 · Cited by 9
The Current Status of Global Urology
Scotland, K. B., & Watson, G. M. (2020) · Current Bladder Dysfunction Reports · doi:10.1007/s11884-020-00609-w · Cited by 10
Medical Equipment Donation: An End in Itself or a Mean to an End?
Bhatia, V., Reddy, M. V., & Samprathi, M. (2022) · Indian Journal of Critical Care Medicine · doi:10.5005/jp-journals-10071-24121 · Cited by 9
Mody, G. N., Mutabazi, V., Zurovcik, D. R., Bitega, J. P., Nsanzimana, S., Harward, S. H., Wagner, C. M., Nutt, C. T., & Binagwaho, A. (2015) · Globalization and Health · doi:10.1186/s12992-015-0101-4 · Cited by 9
Bergmann, J., Noble, J. A., & Thompson, M. S. (2015) · Procedia Manufacturing · doi:10.1016/j.promfg.2015.07.792 · Cited by 9
Starr, N. E., Panda, N., Johansen, E., Forrester, J. A., Wayessa, E., Salazar, D. R., August, A. T., Fernandez, K., Alemu, S. B., Mammo, T. N., et al. (2020) · British journal of surgery · doi:10.1002/bjs.11756 · Cited by 9
Lasley, J. N., Appiah, E. O., Kojima, K., & Blacksell, S. D. (2023) · Emerging infectious diseases · doi:10.3201/eid2904.220778 · Cited by 8
Gaps and priorities in innovation for children's surgery
Fitzgerald, T. N., Zambeli-Ljepović, A., Olatunji, B. T., Saleh, A., & Ameh, E. A. (2023) · Seminars in Pediatric Surgery · doi:10.1016/j.sempedsurg.2023.151352 · Cited by 8
Bahati, F., Mutua, E., Akech, S., English, M., Nyamwaya, B. M., Gachoki, J. W., & McKnight, J. (2024) · The Lancet Microbe · doi:10.1016/j.lanmic.2024.07.008 · Cited by 8
Jiwa, A., Ngatia, A., Benali, K., Boehmer, N., Delle, S., Emedom-Nnamdi, P., Fofie, C. O., O’Brien, C. M., Olatunji, T., Obayagbona, K. I., et al. (2025) · Journal of Medical Internet Research · doi:10.2196/63495 · Cited by 8
Paper 3D Printing to Supplement Rural Healthcare Supplies — What Do Healthcare Facilities Want?
Kats, D., Spicher, L., Savonen, B., & Gershenson, J. K. (2018) · IEEE Global Humanitarian Technology Conference (GHTC) · doi:10.1109/ghtc.2018.8601529 · Cited by 8
The Global call for action on infection prevention and control
Avortri, G. S., & Nabyonga‐Orem, J. (2019) · International Journal of Health Care Quality Assurance · doi:10.1108/ijhcqa-03-2018-0063 · Cited by 8
Williams, D. B., Köhler, J. C., Howard, A., Austin, Z., & Cheng, Y. (2020) · Medicine Access Point of Care · doi:10.1177/2399202620941367 · Cited by 9
Trust Saidi, & Douglas, T. S. (2021) · Health Policy and Technology · doi:10.1016/j.hlpt.2021.100593 · Cited by 8
Machines matter too: including biomedical engineering partnerships in global health initiatives
Kehinde, T., Biwott, J., Sund, G. C., & Kynes, J. M. (2024) · The Lancet Global Health · doi:10.1016/s2214-109x(24)00294-8 · Cited by 7
The critical condition of anaesthesia provision in low-income and middle-income countries
Ulisubisya, M. (2016) · The Lancet Global Health · doi:10.1016/s2214-109x(16)30129-2 · Cited by 7
A comprehensive district-level laboratory intervention after the Ebola epidemic in Sierra Leone
Mesman, A. W., Bangura, M., Kanawa, S., Gassimu, J. S., Dierberg, K. L., Sheku, M., Orozco, J. D., & Marsh, R. H. (2019) · African Journal of Laboratory Medicine · doi:10.4102/ajlm.v8i1.885 · Cited by 7
Dooley, E., Kousha, O., Msosa, J. M., Ndaule, E., Abraham, C. H., Parr, J., O'Hare, B. A.-M., & Blaikie, A. J. (2020) · BMJ Innovations · doi:10.1136/bmjinnov-2019-000361 · Cited by 7
Metadata
- Authors
- Perry, L., & Malkin, R.
- Affiliations
- Duke University (US)
- Corresponding author
- Malkin, Robert
- ORCID
- Malkin, Robert
- Venue
- Medical & Biological Engineering & Computing
- Published
- 2011-05-20
- Volume
- 49
- Issue
- 7
- Pages
- 719-722
- ISSN
- 0140-0118 (ISSN-L)
- 1741-0444
- OpenAlex
- W2043950867
- Cited by
- 232
- References
- 9
- Citations by year
- 2026: 21 · 2025: 17 · 2024: 29 · 2023: 26 · 2022: 16 · 2021: 18 · 2020: 22 · 2019: 22 · 2018: 12 · 2017: 15 · 2016: 8 · 2015: 7 · 2014: 8 · 2013: 6 · 2012: 4
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- www.springer.com/tdm (tdm)
- Locations
- Medical & Biological Engineering & Computing (publishedVersion)
- PubMed (publishedVersion)
- Funders
- World Health Organization
- Topics
- Health Sciences › Health Professions › Medical Laboratory Technology › Quality and Safety in Healthcare
- Health Sciences › Medicine › Public Health, Environmental and Occupational Health › Global Health and Surgery
- Social Sciences › Business, Management and Accounting › Business and International Management › Innovation and Socioeconomic Development
- Keywords
- medical devices, medical equipment donation, health care system, developing countries, health technology management, lack of training, health infrastructure, humanitarian aid
- MeSH terms
- Developing Countries, Equipment and Supplies, Hospital, Equipment Failure, Humans, International Cooperation, Medically Underserved Area, Biomedical Technology
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review