The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
A Review on the Mechanical Modeling of Composite Manufacturing Processes
Open accessAbstract
The increased usage of fiber reinforced polymer composites in load bearing applications requires a detailed understanding of the process induced residual stresses and their effect on the shape distortions. This is utmost necessary in order to have more reliable composite manufacturing since the residual stresses alter the internal stress level of the composite part during the service life and the residual shape distortions may lead to not meeting the desired geometrical tolerances. The occurrence of residual stresses during the manufacturing process inherently contains diverse interactions between the involved physical phenomena mainly related to material flow, heat transfer and polymerization or crystallization. Development of numerical process models is required for virtual design and optimization of the composite manufacturing process which avoids the expensive trial-and-error based approaches. The process models as well as applications focusing on the prediction of residual stresses and shape distortions taking place in composite manufacturing are discussed in this study. The applications on both thermoset and thermoplastic based composites are reviewed in detail.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kinetics of Phase Change. I General Theory
Avrami, M. (1939) · The Journal of Chemical Physics · doi:10.1063/1.1750380 · Cited by 11,399
Kinetics of Phase Change. II Transformation-Time Relations for Random Distribution of Nuclei
Avrami, M. (1940) · The Journal of Chemical Physics · doi:10.1063/1.1750631 · Cited by 8,714
Granulation, Phase Change, and Microstructure Kinetics of Phase Change. III
Avrami, M. (1941) · The Journal of Chemical Physics · doi:10.1063/1.1750872 · Cited by 6,593
An Introduction to Composite Materials
Clyne, T. W., & Hull, D. (2019) · Cambridge University Press eBooks · doi:10.1017/9781139050586 · Cited by 3,018
Introduction to Composite Materials
Tsai, S. W., & Hahn, H. T. (2018) · Routledge eBooks · doi:10.1201/9780203750148 · Cited by 2,024
Avrami, M. (1940) · Medical Entomology and Zoology · Cited by 1,085
Crystallization behaviour of poly(ether-ether-ketone)
Cebe, P., & Hong, S.-D. (1986) · Polymer · doi:10.1016/0032-3861(86)90006-6 · Cited by 714
An Introduction to Composite Materials
Johnson, A. F. (1982) · Physics Bulletin · doi:10.1088/0031-9112/33/9/035 · Cited by 394
Crystallization kinetics of polyetheretherketone (peek) matrices
Velisaris, C. N., & Seferis, J. C. (1986) · Polymer Engineering and Science · doi:10.1002/pen.760262208 · Cited by 360
Wisnom, M. R., Gigliotti, M., Ersoy, N., Campbell, M., & Potter, K. D. (2005) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.05.019 · Cited by 350
Self-citation
Cited by
Data-Driven Aerospace Engineering: Reframing the Industry with Machine Learning
Brunton, S. L., Nathan Kutz, J., Manohar, K., Aravkin, A. Y., Morgansen, K., Klemisch, J., Goebel, N., Buttrick, J., Poskin, J., Blom-Schieber, A. W., et al. (2021) · AIAA Journal · doi:10.2514/1.j060131 · Cited by 270
Metadata
- Authors
- Baran, I., Cinar, K., Ersoy, N., Akkerman, R., & Hattel, J. H.
- Venue
- Archives of Computational Methods in Engineering
- Published
- 2016-01-20
- Volume
- 24
- Issue
- 2
- Pages
- 365-395
- ISSN
- 1134-3060 (ISSN-L)
- 1886-1784
- OpenAlex
- W2275876036
- Cited by
- 341
- References
- 19
- FWCI
- 17.85
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Review on the Mechanical Modeling of Composite Manufacturing Processes. https://app.cochat.ai/papers/10.1007/s11831-016-9167-2
- The paper
- Baran, I., Cinar, K., Ersoy, N., Akkerman, R., & Hattel, J. H. (2017). A Review on the Mechanical Modeling of Composite Manufacturing Processes. Archives of Computational Methods in Engineering. https://doi.org/10.1007/s11831-016-9167-2
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.