Impact of Harvest Equipment on Ash Variability of Baled Corn Stover Biomass for Bioenergy
Open accessThe DOI matches its Crossref record.
Abstract
Cost-effective conversion of agricultural residues for renewable energy hinges not only on the material’s quality but also the biorefinery’s ability to reliably measure quality specifications. The ash content of biomass is one such specification, influencing pretreatment and disposal costs for the conversion facility and the overall value of a delivered lot of biomass. The biomass harvest process represents a primary pathway for accumulation of soil-derived ash within baled material. In this work, the influence of five collection techniques on the total ash content and variability of ash content within baled corn stover in southwest Kansas is discussed. The equipment tested included a mower for cutting the corn stover stubble, a basket rake, wheel rake, or shred flail to gather the stover, and a mixed or uniform in-feed baler for final collection. The results showed mean ash content to range from 11.5 to 28.2 % depending on operational choice. Resulting impacts on feedstock costs for a biochemical conversion process range from $5.38 to $22.30 Mg −1 based on the loss of convertible dry matter and ash disposal costs. Collection techniques that minimized soil contact (shred flail or nonmowed stubble) were shown to prevent excessive ash contamination, whereas more aggressive techniques (mowing and use of a wheel rake) caused greater soil disturbance and entrainment within the final baled material. Material sampling and testing were shown to become more difficult as within-bale ash variability increased, creating uncertainty around feedstock quality and the associated costs of ash mitigation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Sources of Biomass Feedstock Variability and the Potential Impact on Biofuels Production
Williams, C. L., Westover, T. L., Emerson, R. M., Tumuluru, J. S., & Li, C. (2016) · BioEnergy Research · doi:10.1007/s12155-015-9694-y · Cited by 365
Characterizing variability in lignocellulosic biomass: a review
Yan, J., Oyedeji, O., Leal, J. H., Donohoe, B. S., Semelsberger, T. A., Li, C., Hoover, A. N., Webb, E., Bose, E. A., Zeng, Y., et al. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06263 · Cited by 134
Physical and chemical characteristics of renewable fuel obtained from pruning residues
Picchi, G., Lombardini, C., Pari, L., & Spinelli, R. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.025 · Cited by 49
Idaho National Laboratory (INL), I. F., Kenney, K., USDOE Office of Energy Efficiency and Renewable Energy (EERE), Cafferty, K., Jacobson, J., Bonner, I., Gresham, G., Smith, W., Thompson, D., Thompson, V., et al. (2013) · doi:10.2172/1130548 · Cited by 42
Self-citation
Metadata
- Authors
- Bonner, I. J., Smith, W. A., Einerson, J. J., & Kenney, K. L.
- Venue
- BioEnergy Research
- Published
- 2014-03-01
- Volume
- 7
- Issue
- 3
- Pages
- 845-855
- ISSN
- 1939-1234 (ISSN-L)
- 1939-1242
- OpenAlex
- W2093785895
- Cited by
- 47
- References
- 0
- FWCI
- 15.79
- Type
- book chapter
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Impact of Harvest Equipment on Ash Variability of Baled Corn Stover Biomass for Bioenergy. https://app.cochat.ai/papers/10.1007/s12155-014-9432-x
- The paper
- Bonner, I. J., Smith, W. A., Einerson, J. J., & Kenney, K. L. (2014). Impact of Harvest Equipment on Ash Variability of Baled Corn Stover Biomass for Bioenergy. BioEnergy Research. https://doi.org/10.1007/s12155-014-9432-x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.