The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Highly-anisotropic optical and electrical properties in layered SnSe
Abstract
Anisotropic materials are of considerable interest because of their unique combination of polarization- or direction-dependent electrical, optical, and thermoelectric properties. Low-symmetry two-dimensional (2D) materials formed by van der Waals stacking of covalently bonded atomic layers are inherently anisotropic. Layered SnSe exhibits a low degree of lattice symmetry, with a distorted NaCl structure and an in-plane anisotropy. Here we report a systematic study of the in-plane anisotropic properties in layered SnSe, using angle-resolved Raman scattering, optical absorption, and electrical transport studies. The optical and electrical characterization was direction-dependent, and successfully identified the crystalline orientation in the layered SnSe. Furthermore, the dependence of Raman-intensity anisotropy on the SnSe flake thickness and the excitation wavelength were investigated by both experiments and theoretical calculations. Finally, the electrical transport studies demonstrated that few-layer SnSe field-effect transistors (FETs) have a large anisotropic ratio of carrier mobility (∼5.8) between the armchair and zigzag directions, which is a record high value reported for 2D anisotropic materials. The highly-anisotropic properties of layered SnSe indicate considerable promise for anisotropic optics, electronics, and optoelectronics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Large, non-saturating magnetoresistance in WTe2
Ali, M. N., Xiong, J., Flynn, S., Tao, J., Gibson, Q. D., Schoop, L. M., Liang, T., Haldolaarachchige, N., Hirschberger, M., Ong, N. P., et al. (2014) · Nature · doi:10.1038/nature13763 · Cited by 1,673 · cited 2×
“By using a particular crystalline orientation, a large and non-saturating magnetoresistance has been achieved in anisotropic 2D materials, which suggests significant potential as magnetic sensors [8].”
Background
Cited by
Promises and prospects of two-dimensional transistors
Liu, Y., Duan, X., Shin, H.-J., Park, S., Huang, Y., & Duan, X. (2021) · Nature · doi:10.1038/s41586-021-03339-z · Cited by 1,356
Self-citationHigh-performance SnSe thermoelectric materials: Progress and future challenge
Chen, Z.-G., Shi, X., Zhao, L.-D., & Zou, J. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.04.005 · Cited by 597
Self-citationStrain engineering of two‐dimensional materials: Methods, properties, and applications
Yang, S., Chen, Y., & Jiang, C. (2021) · InfoMat · doi:10.1002/inf2.12177 · Cited by 504
Self-citationTwo-dimensional transistors beyond graphene and TMDCs
Liu, Y., Duan, X., Huang, Y., & Duan, X. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00318a · Cited by 474
Self-citation
Metadata
- Authors
- Yang, S., Liu, Y., Wu, M., Zhao, L.-D., Lin, Z., Cheng, H.-C., Wang, Y., Jiang, C., Wei, S.-H., Huang, L., Huang, Y., & Duan, X.
- Venue
- Nano Research
- Publisher
- Tsinghua University Press
- Published
- 2017-08-04
- Volume
- 11
- Issue
- 1
- Pages
- 554-564
- ISSN
- 1998-0000 (ISSN-L)
- 1998-0124
- OpenAlex
- W2744980439
- Cited by
- 161
- References
- 1
- FWCI
- 5.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.