The bias-extension test for the analysis of in-plane shear properties of textile composite reinforcements and prepregs: a review
Open accessThe DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
The bias-extension test is a rather simple experiment aiming to determine in-plane shear properties of textile composite reinforcements. However the mechanics during the test involves fibrous material at large shear strains and large rotations of the fibres. Several aspects are still being studied and are not yet modeled in a consensual manner. The standard analysis of the test is based on two assumptions: inextensibility of the fibers and rotations at the yarn crossovers without slippage. They lead to the development of zones with constant fibre orientations proper to the bias-extension test. Beyond the analysis of the test within these basic assumptions, the paper presents studies that have been carried out on the lack of verification of these hypothesis (slippage, tension in the yarns, effects of fibre bending). The effects of temperature, mesoscopic modeling and tension locking are also considered in the case of the bias-extension test.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Algorithm for Least-Squares Estimation of Nonlinear Parameters
Marquardt, D. W. (1963) · Journal of the Society for Industrial and Applied Mathematics · doi:10.1137/0111030 · Cited by 30,728 · cited 1×
“In order to overcome the calculation of the force quantities defined in the previous sections, the inverse approach [49, 50] can be a way to identify the parameters relatives to in-”
An inverse method for determining elastic material properties and a material interface
Schnur, D. S., & Zabaras, N. (1992) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620331004 · Cited by 216 · cited 1×
“In order to overcome the calculation of the force quantities defined in the previous sections, the inverse approach [49, 50] can be a way to identify the parameters relatives to in-”
Hyperelastic modelling for mesoscopic analyses of composite reinforcements
Charmetant, A., Vidal-Sallé, E., & Boisse, P. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.07.004 · Cited by 196 · cited 1×
“Both specific hypoelastic [91–93] and hyperelastic [78, 94] laws have been developed.”
BackgroundSelf-citationA Hyperelastic Approach for Composite Reinforcement Large Deformation Analysis
Aimène, Y., Vidal-Sallé, E., Hagège, B., Sidoroff, F., & Boisse, P. (2009) · Journal of Composite Materials · doi:10.1177/0021998309345348 · Cited by 155 · cited 2×
“Definitions and identifications of the first gradient strain energies for different fibrous reinforcements can be found in [78, 79] and of the second gradient strain energy in [76, 77, 80].”
BackgroundSelf-citationGuzman-Maldonado, E., Hamila, N., Naouar, N., Moulin, G., & Boisse, P. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.12.166 · Cited by 143 · cited 1×
“Depending on the process it can be taken into account in the constitutive model or neglected [54, 55].”
BackgroundSelf-citationGuzman-Maldonado, E., Hamila, N., Boisse, P., & Bikard, J. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.017 · Cited by 135 · cited 1×
“Depending on the process it can be taken into account in the constitutive model or neglected [54, 55].”
BackgroundSelf-citationLarge deformation analysis of fibrous materials using rate constitutive equations
Badel, P., Vidal-Sallé, E., & Boisse, P. (2008) · Computers & Structures · doi:10.1016/j.compstruc.2008.01.009 · Cited by 127
Self-citationCazzani, A., Malagù, M., & Turco, E. (2014) · Continuum Mechanics and Thermodynamics · doi:10.1007/s00161-014-0409-y · Cited by 103 · cited 1×
“cently studied by means of other methods [81, 82].”
MethodShear characterisation of uni-directional fibre reinforced thermoplastic melts by means of torsion
Haanappel, S. P., & Akkerman, R. (2013) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.09.007 · Cited by 64
Metadata
- Authors
- Boisse, P., Hamila, N., Guzman-Maldonado, E., Madeo, A., Hivet, G., & dell’Isola, F.
- Venue
- International Journal of Material Forming
- Published
- 2016-04-11
- Volume
- 10
- Issue
- 4
- Pages
- 473-492
- ISSN
- 1960-6206 (ISSN-L)
- 1960-6214
- OpenAlex
- W2321988567
- Cited by
- 245
- References
- 9
- FWCI
- 17.56
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The bias-extension test for the analysis of in-plane shear properties of textile composite reinforcements and prepregs: a review. https://app.cochat.ai/papers/10.1007/s12289-016-1294-7
- The paper
- Boisse, P., Hamila, N., Guzman-Maldonado, E., Madeo, A., Hivet, G., & dell’Isola, F. (2017). The bias-extension test for the analysis of in-plane shear properties of textile composite reinforcements and prepregs: a review. International Journal of Material Forming. https://doi.org/10.1007/s12289-016-1294-7
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.