Heavy Metal Leaching, CO2 Uptake and Mechanical Characteristics of Carbonated Porous Concrete with Alkali-Activated Slag and Bottom Ash
Open accessThe DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Abstract
In the present study, a porous concrete with alkali activated slag (AAS) and coal bottom ash was developed and the effect of carbonation on the physical property, microstructural characteristic, and heavy metal leaching behavior of the porous concrete were investigated. Independent variables, such as the type of the alkali activator and binder, the amount of paste, and CO 2 concentration, were considered. The experimental test results showed that the measured void ratio and compressive strength of the carbonated porous concrete exceeded minimum level stated in ACI 522 for general porous concrete. A new quantitative TG analysis for evaluating CO 2 uptake in AAS was proposed, and the result showed that the CO 2 uptake in AAS paste was approximately twice as high as that in OPC paste. The leached concentrations of heavy metals from carbonated porous concrete were below the relevant environmental criteria.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Carbonation neutralizes the pore solution and can lead to corrosion of embedded rebars for concrete; for alkali-activated slags it can cause a reduction in the compressive strength 10,26 .”
From Thermodynamic Modeling and Experimental Study of Carbonation of Alkali-Activated Slag Cements (2023) · cites this paper as [26]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Journal of hazardous materials
(1975) · Science of The Total Environment · doi:10.1016/0048-9697(75)90070-4 · Cited by 1,168
FERNANDEZBERTOS, M., SIMONS, S., HILLS, C., & CAREY, P. (2004) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2004.04.019 · Cited by 1,079
Hydration products of alkali activated slag cement
Wang, S.-D., & Scrivener, K. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00045-e · Cited by 997
The relationship between porosity and strength for porous concrete
Lian, C., Zhuge, Y., & Beecham, S. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.05.005 · Cited by 683
Phoo-ngernkham, T., Maegawa, A., Mishima, N., Hatanaka, S., & Chindaprasirt, P. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.05.001 · Cited by 572
Utilization of fly ash for stabilization/solidification of heavy metal contaminated soils
Dermatas, D., & Meng, X. (2003) · Engineering Geology · doi:10.1016/s0013-7952(03)00105-4 · Cited by 562
Kim, M. S., Jun, Y., Lee, C., & Oh, J. E. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.09.011 · Cited by 518
Pore solution chemistry of alkali-activated ground granulated blast-furnace slag
Song, S., & Jennings, H. M. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00212-9 · Cited by 437
Synthesis and heavy metal immobilization behaviors of slag based geopolymer
Yunsheng, Z., Wei, S., Qianli, C., & Lin, C. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.09.033 · Cited by 398
Heavy metal speciation and leaching behaviors in cement based solidified/stabilized waste materials
Li, X. (2001) · Journal of Hazardous Materials · doi:10.1016/s0304-3894(00)00360-5 · Cited by 394
Research works printed but not linked: 2
- American Society for Testing and Materials, ASTM C39. (2012). Standard test method for compressive strength of cylindrical concrete specimens. West Conshohocken, PA: ASTM International.
- NSF International standard/American National Standard, NSF/ANSI 61-2007a. (2007). Drinking water system components—health effects. Oxfordshire: NSF International.
Cited by
Jang, J. G., Kim, G. M., Kim, H. J., & Lee, H. K. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.10.017 · Cited by 419
Self-citationZhang, J., Shi, C., & Zhang, Z. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.024 · Cited by 164
Kim, G. M., Yang, B., Cho, K. J., Kim, E. M., & Lee, H. K. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.12.049 · Cited by 140
Self-citationKim, G. M., Jang, J. G., Khalid, H. R., & Lee, H. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.01.020 · Cited by 135
Self-citationZhang, J., Shi, C., & Zhang, Z. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121258 · Cited by 135
Metadata
- Authors
- Kim, G. M., Jang, J. G., Naeem, F., & Lee, H. K.
- Affiliations
- Korea Advanced Institute of Science and Technology (KR)
- Corresponding author
- Lee, H. K.
- Venue
- International Journal of Concrete Structures and Materials
- Published
- 2015-09
- Volume
- 9
- Issue
- 3
- Pages
- 283-294
- ISSN
- 1976-0485 (ISSN-L)
- 2234-1315
- OpenAlex
- W1261930389
- Cited by
- 61
- References
- 46
- Citations by year
- 2026: 7 · 2025: 9 · 2024: 3 · 2023: 11 · 2022: 12 · 2021: 3 · 2020: 3 · 2019: 5 · 2018: 3 · 2017: 3 · 2016: 2
- FWCI
- 4.41
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- International Journal of Concrete Structures and Materials (publishedVersion, cc-by)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
- Physical Sciences › Engineering › Building and Construction › Recycling and utilization of industrial and municipal waste in materials production
- Physical Sciences › Engineering › Building and Construction › Materials Engineering and Processing
- Keywords
- pervious concrete, alkali-activated slag, coal bottom ash, carbonation, CO2 uptake, heavy metal leaching, compressive strength, void ratio, thermogravimetric analysis, alkaline activator, mechanical properties, microstructure
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Heavy Metal Leaching, CO2 Uptake and Mechanical Characteristics of Carbonated Porous Concrete with Alkali-Activated Slag and Bottom Ash. https://app.cochat.ai/papers/10.1007/s40069-015-0111-x
- The paper
- Kim, G. M., Jang, J. G., Naeem, F., & Lee, H. K. (2015). Heavy Metal Leaching, CO2 Uptake and Mechanical Characteristics of Carbonated Porous Concrete with Alkali-Activated Slag and Bottom Ash. International Journal of Concrete Structures and Materials. https://doi.org/10.1007/s40069-015-0111-x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.