Effect of building shape, orientation, window to wall ratios and zones on energy efficiency and thermal comfort of naturally ventilated houses in tropical climate
Open accessAbstract
This paper examines the effect of building shape, zones, orientation and window to wall ratio (WWR) on the lighting energy requirement and the thermal comfort in the naturally ventilated houses in tropical climate. The lighting electricity and the adaptive thermal discomfort hours (ASHRAE 55 80% acceptability) of 300 different models of two-storey houses were obtained using Design Builder simulation software. The models were developed for three building shapes (square, rectangle and L-shaped) and the orientation of each model was changed for 24 orientations and four window to wall ratios. Results indicate that the rectangular shape with staircase positioned in the middle of the house will provide higher thermal comfort for WWR of 20 and for other WWRs the L-shaped models provide higher thermal comfort when the staircase is positioned at the short corner or middle. The square-shaped houses with staircase at the middle have the highest lighting electricity and the L shape has the lowest lighting electricity. Further, WWR changes the thermal comfort by 20–55% and the percentage change in lighting electricity due to WWR is only 1.5–9.5%. Therefore, thermal comfort should receive more attention in deciding the WWR. Moreover, the results show an effect when the zone sizes and location change.
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
Indoor thermal comfort can be achieved without using a mechanically or electrically built cooling system if the indoor temperature remains within the range of mild to moderate discomfort levels.
“Literature suggests that indoor thermal comfort can be achieved without using a mechanically or electrically build cooling system if the indoor temperature remains within the range of mild to moderate discomfort levels [44].”
From Thermal Discomfort Levels, Building Design Concepts, and Some Heat Mitigation Strategies in Low-Income Communities of a South Asian City (2021) · cites this paper as [44]
Cited by
Sorted by citations
Thermochromic smart window technologies for building application: A review
Aburas, M., Soebarto, V., Williamson, T., Liang, R., Ebendorff-Heidepriem, H., & Wu, Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113522 · Cited by 425 · see citing works
Ehsan, S., Abbas, F., Ibrahim, M., Ahmad, B., & Farooque, A. A. (2021) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph18052535 · Cited by 36 · see citing works
“Literature suggests that indoor thermal comfort can be achieved without using a mechanically or electrically build cooling system if the indoor temperature remains within the range of mild to moderate discomfort levels [44].”
Background
- Authors
- Pathirana, S., Rodrigo, A., & Halwatura, R.
- Affiliations
- University of Moratuwa (LK)
- Corresponding author
- Pathirana, Shakila
- Venue
- International Journal of Energy and Environmental Engineering
- Published
- 2019-01-03
- Volume
- 10
- Issue
- 1
- Pages
- 107-120
- ISSN
- 2008-9163 (ISSN-L)
- 2251-6832
- OpenAlex
- W2907052696
- Cited by
- 165
- References
- 0
- Citations by year
- 2026: 15 · 2025: 27 · 2024: 33 · 2023: 26 · 2022: 22 · 2021: 27 · 2020: 14 · 2019: 1
- FWCI
- 10.72
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- International journal of energy and environmental engineering (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- University of Moratuwa (SRC/ST/2017/42)
- Topics
- Physical Sciences › Engineering › Building and Construction › Building Energy and Comfort Optimization
- Physical Sciences › Engineering › Mechanical Engineering › Solar Energy Systems and Technologies
- Physical Sciences › Engineering › Building and Construction › Building energy efficiency and sustainability
- Keywords
- building geometry, building orientation, window-to-wall ratio, thermal comfort, lighting energy, adaptive thermal comfort, ASHRAE Standard 55, thermal zones, tropical climate, two-story houses, energy efficiency
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review