The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Additive manufacturing of hydroxyapatite bioceramic scaffolds: Dispersion, digital light processing, sintering, mechanical properties, and biocompatibility
Open accessAbstract
Hydroxyapatite (HA) bioceramic scaffolds were fabricated by using digital light processing (DLP) based additive manufacturing. Key issues on the HA bioceramic scaffolds, including dispersion, DLP fabrication, sintering, mechanical properties, and biocompatibility were discussed in detail. Firstly, the effects of dispersant dosage, solid loading, and sintering temperature were studied. The optimal dispersant dosage, solid loading, and sintering temperature were 2 wt%, 50 vol%, and 1250 °C, respectively. Then, the mechanical properties and biocompatibility of the HA bioceramic scaffolds were investigated. The DLP-prepared porous HA bioceramic scaffold was found to exhibit excellent mechanical properties and degradation behavior. From this study, DLP technique shows good potential for manufacturing HA bioceramic scaffolds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shen, T., Yang, W., Shen, X., Chen, W., Tao, B., Yang, X., Yuan, J., Liu, P., & Cai, K. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00791 · Cited by 30
Cited by
Progress and challenges towards additive manufacturing of SiC ceramic
He, R., Zhou, N., Zhang, K., Zhang, X., Zhang, L., Wang, W., & Fang, D. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0484-z · Cited by 327
Self-citationVat photopolymerization of polymers and polymer composites: Processes and applications
Al Rashid, A., Ahmed, W., Khalid, M. Y., & Koç, M. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102279 · Cited by 326
Hydroxyapatite for Biomedical Applications: A Short Overview
Fiume, E., Magnaterra, G., Rahdar, A., Verné, E., & Baino, F. (2021) · Ceramics · doi:10.3390/ceramics4040039 · Cited by 313
Photopolymerization-based additive manufacturing of ceramics: A systematic review
Rasaki, S. A., Xiong, D., Xiong, S., Su, F., Idrees, M., & Chen, Z. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0468-z · Cited by 297
A review of 3D printed porous ceramics
Zhang, F., Li, Z., Xu, M., Wang, S., Li, N., & Yang, J. (2022) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2022.02.039 · Cited by 284
Metadata
- Authors
- Feng, C., Zhang, K., He, R., Ding, G., Xia, M., Jin, X., & Xie, C.
- Venue
- Journal of Advanced Ceramics
- Publisher
- Tsinghua University Press
- Published
- 2020-06
- Volume
- 9
- Issue
- 3
- Pages
- 360-373
- ISSN
- 2226-4108 (ISSN-L)
- 2227-8508
- OpenAlex
- W3034153390
- Cited by
- 207
- References
- 1
- FWCI
- 8.85
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.