Achieving High-Quality Aluminum to Copper Dissimilar Metals Joint via Friction Stir Double-Riveting Welding

Intermetallic phase formation in diffusion-bonded Cu/Al laminates

Guo, Y., Liu, G., Jin, H., Shi, Z., & Qiao, G. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-5093-0 · Cited by 210

Grain structure and dislocation density measurements in a friction-stir welded aluminum alloy using X-ray peak profile analysis

Woo, W., Balogh, L., Ungár, T., Choo, H., & Feng, Z. (2008) · Materials Science and Engineering A · doi:10.1016/j.msea.2008.08.007 · Cited by 175

Microstructure evolution and mechanical properties of friction stir spot welded dissimilar aluminum-copper joint

Zhou, L., Li, G. H., Zhang, R. X., Zhou, W. L., He, W. X., Huang, Y. X., & Song, X. G. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.10.045 · Cited by 144

Effect of Interfacial Microstructure Evolution on Mechanical Properties and Fracture Behavior of Friction Stir-Welded Al-Cu Joints

Xue, P., Xiao, B., & Ma, Z. Y. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-2909-1 · Cited by 115

Metallurgical analysis of Al/Cu friction stir spot welding

Heideman, R. J., Johnson, C., & Kou, S. (2010) · Science and Technology of Welding & Joining · doi:10.1179/136217110x12785889549985 · Cited by 88

Influence of dwell time on microstructure evolution and mechanical properties of dissimilar friction stir spot welded aluminum–copper metals

Li, G., Zhou, L., Zhou, W., Song, X., & Huang, Y. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.02.015 · Cited by 85

Effect of pin profile on microstructure and mechanical properties of friction stir spot welded Al-Cu dissimilar metals

Zhou, L., Zhang, R.-H., Li, G. H., Zhou, W. L., Huang, Y., & Song, X. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.09.017 · Cited by 83

Development of AZ91/SiC surface composite by FSP: effect of vibration and process parameters on microstructure and mechanical characteristics

Bagheri, B., & Abbasi, M. (2020) · Advances in Manufacturing · doi:10.1007/s40436-019-00288-9 · Cited by 83

Effect of a Zn interlayer on dissimilar FSSW of Al and Cu

Boucherit, A., Avettand-Fènoël, M.-N., & Taillard, R. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.063 · Cited by 81

Friction Stir Spot Welding of Aluminum and Copper: A Review

Li, M., Zhang, C., Wang, D., Zhou, L., Wellmann, D., & Tian, Y. (2019) · Materials · doi:10.3390/ma13010156 · Cited by 81

Review on friction stir welding of dissimilar magnesium and aluminum alloys: Scientometric analysis and strategies for achieving high-quality joints

Ahmed, M. M. Z., Seleman, M. M. E.-S., Fydrych, D., & Çam, G. (2023) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2023.09.039 · Cited by 227

A review on friction stir butt welding of aluminum with magnesium: A new insight on joining mechanisms by interfacial enhancement

Khaliq, U. A., Muhamad, M. R., Yusof, F. B., Ibrahim, S., Isa, M. S. M., CHEN, Z. W., & Çam, G. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.10.158 · Cited by 181

Friction stir based welding, processing, extrusion and additive manufacturing

Liu, F. C., Feng, A., Pei, X., Hovanski, Y., Mishra, R. S., & Ma, Z. Y. (2024) · Progress in Materials Science · doi:10.1016/j.pmatsci.2024.101330 · Cited by 155

Effect of linear friction welding process on microstructure evolution, mechanical properties and corrosion behavior of GH4169 superalloy

Su, Y., Yang, X., Meng, T., Wu, D., Xu, R. F., Xu, H., Li, W., & Yin, S. (2024) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2024.03.039 · Cited by 70

Wire-based friction stir additive manufacturing enables enhanced interlayer bonding in aluminum-matrix composites

Sun, S., Meng, X., Xie, Y., Wang, J., Ma, X., Wang, N., Li, X., & Huang, Y. (2025) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2025.08.078 · Cited by 63

A novel seal-flow multi-vortex friction stir lap welding of metal to polymer matrix composites

Nian, S., Mingshen, L. I., Ji, S., Hu, W., Zhang, Z., & Sun, Z. (2023) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2023.04.009 · Cited by 53

Friction stir welding-based technologies: A comprehensive review from the sustainable manufacturing perspectives

Habba, M. I. A., & Ahmed, M. M. Z. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.07.184 · Cited by 52

Strengthening mechanism and forming control of linear friction welded GH4169 alloy joints

Su, Y., Yang, X., Meng, T., Xinyuan, H. E., Wu, D., Li, W., & Yin, S. (2024) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2024.01.026 · Cited by 45

Friction stir welding of dissimilar aluminum and copper alloys: A review of strategies for enhancing joint quality

Habba, M. I. A., & Ahmed, M. M. Z. (2025) · Journal of Advanced Joining Processes · doi:10.1016/j.jajp.2025.100293 · Cited by 39

Improving the quality of resistance welded thermoplastic composite joints by applying ultrasonic

Ma, Z., Xu, Z., Li, Z., Chen, S., Wu, Y. D., & Yan, J. (2024) · Composites Part B Engineering · doi:10.1016/j.compositesb.2024.111398 · Cited by 37

Achievement of high-strength Al/CFRP hybrid joint via high-speed friction stir lap joining and laser texturing pretreatment parameters variation

Liu, Y., Wang, X., Zhou, L., Zhao, H., Han, X., Tan, C., & Song, X. (2024) · Thin-Walled Structures · doi:10.1016/j.tws.2024.111762 · Cited by 31

Multiple effects of forced cooling on joint quality in coolant-assisted friction stir welding

Liu, X., Li, W. T., Zhou, Y. Q., Li, Y., Pei, X., Shen, Z., & Wang, Q. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.06.248 · Cited by 31

Optimizing welding sequence of TIG cross-joint of Invar steel using residual stresses and deformations

Su, Y., Yang, X., Wu, D., Meng, T., Li, W., Feng, W., & Vairis, A. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.09.047 · Cited by 30

Effect of the Ni plating on Al–Cu dissimilar metal laser welded joint

Sung, H.-M., Lee, S., Lee, D., Kim, H., Kang, S.-G., Lee, G.-D., Jeong, K., & Han, H. N. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.07.007 · Cited by 28

A general strategy for achieving high-strength joining of 2024 aluminum alloys via impacting flow friction stir lap welding

Zhang, Z., Jin, Y., Ma, L., Ji, S., Dong, J., Zhao, H., Sun, Z., & Song, Q. (2025) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2025.01.007 · Cited by 28

Quasi-in-situ characterization of microstructure evolution in friction stir welding of aluminum alloy

Liu, X., Ye, T., Li, Y., Pei, X., & Sun, Z. G. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.07.101 · Cited by 27

Insights into the influence of welding energy on the ultrasonic welding of glass fibre-reinforced PPS composites

Xu, Z., Ma, Z., Li, Z., Chen, S., Wu, Y., Zhang, H., & Yan, J. (2024) · Composites Science and Technology · doi:10.1016/j.compscitech.2024.110767 · Cited by 27

A novel reverse-flow friction stir lap welding of 2024 aluminum alloys based on a right-left thread X-shape pin

Zhang, Z., Lu, K., Ji, S., Yue, Y., Song, Q., Chen, J., Li, Z., & Ma, L. (2025) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2025.01.001 · Cited by 26

Enhanced formation quality and tensile shear load of 7B04 aluminum alloys lap joint by impacting flow friction stir lap welding

Zhang, Z., Liu, H., Ji, S., Zhang, J., Chen, J., Ma, L., & Song, Q. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.04.197 · Cited by 25

Microstructure, mechanical property and bonding mechanism of the repaired mechanical hole out of dimension tolerance of 2024 aluminum alloy by radial-additive friction stir repairing

Zhang, Z., Zhang, J., Ji, S., Gong, P., Sun, Y., Liu, H., & Ma, L. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.01.226 · Cited by 24

Achievement of superb-strength lap joint via opposite-directions flowing friction stir lap welding of 2024 aluminum alloys

Zhang, Z., Gong, P., Ji, S., Ma, L., Chen, J., Li, X., & Song, Q. (2024) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2024.10.010 · Cited by 23

Multi-response optimization of friction stir welding parameters for AA6063-T6 using hybrid RSM–ANN–GRA–TOPSIS

Sabry, I., Mourad, A.-H. I., & ElWakil, M. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.114524 · Cited by 22

The effects of environments and adhesive layer thickness on the failure modes of composite material bonded joints

Yang, K., Feng, H., Li, P., Ji, S., Lv, Z., & Liu, Z. (2024) · Scientific Reports · doi:10.1038/s41598-024-73987-4 · Cited by 22

Friction stir welding of as-cast and pre-aged Al–Si–Zn–Mg–Fe alloy: Microstructure, mechanical and corrosion properties

Chen, X., Liu, K., Liu, Q., Cristino, V. A. M., Lo, K. H., Xie, Z., Wang, Z., Song, D., Kong, J., & Kwok, C. T. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.07.024 · Cited by 21

A novel method for reducing the welding pressure requirement in resistance welding of thermoplastic composites

Ma, Z., Xu, Z., Li, Z., Chen, S., Wu, Y., Zhang, H., & Yan, J. (2024) · Composites Science and Technology · doi:10.1016/j.compscitech.2024.110850 · Cited by 21

Acoustic effect on the joint quality and process of friction stir lap welding of aluminum to steel

Liu, T., Gao, S. F., Shen, X., Sun, Z., Shi, L., Kumar, S., & Yang, C. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.106184 · Cited by 21

Microstructure and mechanical properties of Ti/Al laminates fabricated by ultrasonic additive manufacturing assisted by Joule heat and post-welding heat treatment

Wang, B., Zhang, H., Gao, C., & Lv, W. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.09.277 · Cited by 20

Influences of graphene nanoplatelet addition and pin lengths on the microstructure and mechanical properties of 7075 aluminum alloy under friction stir spot welding

Mohan, A. E., SAJURI, Z. B., Baghdadi, A. H., Jamadon, N. H., & Abbasi, M. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.07.065 · Cited by 20

Failure analysis and size optimization of CFRP composite single-lap bonded joints based on the influence of multiple parameters

Yang, K., Liu, Z., Qi, X., Li, P., Ji, S., Liu, P., & Liu, Z. (2024) · Scientific Reports · doi:10.1038/s41598-024-83605-y · Cited by 19

An investigation of bimetallic tube fabrication through a novel friction stir extrusion based technology for automotive applications

Swarnkar, R., Karmakar, S., & Pal, S. K. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.106363 · Cited by 19

Microstructure and Mechanical Properties of Refill Friction Stir Spot-Welded Joints of 2A12Al and 7B04Al: Effects of Tool Size and Welding Parameters

Wang, Y., Li, P., Jiang, H., Yang, K., Chen, Z., Chuai, H., Wu, X., Meng, Q., & Ma, L. (2024) · Materials · doi:10.3390/ma17030716 · Cited by 19

Research on ultrasonic-stationary shoulder assisted friction stir lap welding of thermoplastic polymer and aluminum alloy

Kang, Y., Nian, S., Ji, S., Hu, W., Liu, J.-L., & Ma, L. (2024) · Composites Part B Engineering · doi:10.1016/j.compositesb.2024.111797 · Cited by 18

Study on relieving residual stress of friction stir welded joint of 2219 aluminum alloy using cold spraying

Yang, X., Meng, T., Su, Y., Qi, Z., Wu, D., Vairis, A., & Li, W. (2023) · Materials Characterization · doi:10.1016/j.matchar.2023.113417 · Cited by 15

A strategy on the consistency of tensile strength of friction stir lap welding joint based on the same peak temperature

Ji, X., Zhang, Y., Jin, W., & Qi, X. (2026) · Metals Advances · doi:10.1016/j.metadv.2026.01.005 · Cited by 14

A novel vertical-torrent friction stir lap welding method using tool with conical swirly pins

Song, Q., Chen, Z., Ji, S., Zhang, Z., Zhao, H., & Ma, L. (2024) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2024.07.004 · Cited by 13

Welding load, temperature, and material flow in ultrasonic vibration enhanced friction stir lap welding of aluminum alloy to steel

Liu, T., Gao, S. F., Shi, L., Kumar, S., Yin, Z., Sun, Z., Zhao, W., & Qiao, J. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.109894 · Cited by 12

Intermetallic Compounds Formation in Dissimilar Friction Stir Welding of Mg/Cu Alloys

Li, X., Zhao, Q., Su, H., Chen, J., & Wu, C. (2024) · Acta Metallurgica Sinica (English Letters) · doi:10.1007/s40195-024-01714-z · Cited by 10

The effect of pin diameter, tool penetration depth and plate arrangement on mechanical and metallurgical properties of 6061-T6 and 5052-T32 aluminum dissimilar joints in friction stir spot welding (FSSW)

Feizollahi, V., Gerami, Y., Saki, A., Adelzadeh, B., Zamani, M., Hasab, M. G., & Moghadam, A. H. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e36962 · Cited by 10

Microstructural evolution and mechanical performance of friction stir spot welded ultrafine carbide-free bainitic steel: Role of dwell time

Kabirmohammadi, M., Yazdani, S., Saeid, T., & Pouranvari, M. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.10.092 · Cited by 10

Achievement of nearly-equal-strength repaired exceeded tolerance hole of 2024 aluminum alloy by ultrasonic-assisted radial-additive friction stir repairing

Ji, S., Jirui, W. A. N. G., ZHANG, Z., Liu, H., Sun, Y., & Yue, Y. (2025) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2025.103620 · Cited by 9

Characteristics of Dissimilar Ti/Al Butt-Lap Joint Fabricated via Ultrasonic-Assisted Friction Stir Welding

Chen, Y., & Zhang, F. (2024) · Transactions of the Indian Institute of Metals · doi:10.1007/s12666-024-03403-y · Cited by 9

Improving tensile strength of radial-additive friction stir repaired exceeded tolerance hole of 2024-T4 Al alloy by EHGWOA-BPNN

Zhang, Z., Qi, X., Yue, Y., Ji, S., Gong, P., Wang, B., & Zhang, J. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.02.083 · Cited by 8

Effect of tool shoulder geometry on lapped Al/CFRTP hybrid joint structure and strength made by pinless friction spot joining

Li, W., Geng, P., Ma, N., Fujii, H., & Ma, H. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.09.192 · Cited by 8

Microstructure and mechanical properties of probeless friction stir spot welded AlLi alloy joints via fast electric pulse treatment: A comparative study

Fan, W., Chu, Q., Yang, X., Li, W., Zou, Y., & Hao, S. (2023) · Materials Characterization · doi:10.1016/j.matchar.2023.113276 · Cited by 8

Interfacial reaction characteristics and mechanisms during dissimilar friction stir lap welding of pure copper and Al0.1CoCrFeNi alloy

Zhang, H., Miao, J., Wang, K., Yu, C., Mei, R., & Lin, X. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.06.201 · Cited by 8

Improved Interface Morphology and Failure Load of Ultrasonic-Assisted Friction Stir Lap Welding Joint of 2024 Aluminum Alloy to 304 Stainless Steel

Han, L., Yu, Z., Yan, D., Rao, Y., & Ma, L. (2024) · Metals · doi:10.3390/met14030267 · Cited by 7

Microstructure and mechanical properties of dissimilar metal joints of copper/aluminum using FeCoCrNiMn filler material

Liu, D., Ni, C., Ma, Z., Li, B., Tang, Y., & Wang, X. (2023) · Welding in the World · doi:10.1007/s40194-023-01608-1 · Cited by 7

Effect of nickel interlayer thickness on intermetallic compound formation and interfacial integrity in pulsed laser welding of aluminum and copper

Singh, R., Arora, N., & Choudhary, A. (2026) · Welding in the World · doi:10.1007/s40194-026-02375-5 · Cited by 6

A realization of Al/Ti dissimilar friction stir welding via bottom dynamic support using a Co-based alloy welding tool

Zuo, Y., Liu, H., Li, D., Gao, Y., & Li, X. (2024) · Welding in the World · doi:10.1007/s40194-024-01800-x · Cited by 6

Microstructure and Properties of Laser-Remelted Al-Cu-Mn Alloy

Hou, J., Li, H., Dong, Q., & Zhao, Z. (2025) · Metals · doi:10.3390/met15070693 · Cited by 5

Influence of Zn Content on the Corrosion and Mechanical Properties of Cast and Friction Stir-Welded Al-Si-Mg-Fe-Zn Alloys

Chen, X., Liu, K., Liu, Q., Kong, J., Cristino, V. A. M., Lo, K. H., Xie, Z., Wang, Z., Song, D., & Kwok, C. T. (2025) · Materials · doi:10.3390/ma18143306 · Cited by 5

Research progress of composite technology of laser processing and friction stir processing

Liu, H., Zhao, H., Zhao, Y., Peng, Y., & Xu, M. (2025) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2025.06.092 · Cited by 4

Microstructure evolution and Interface morphology optimization in synergistic double-sided probeless friction stir spot welding of dissimilar 7075/6061 aluminum alloys

Fan, W., Xu, H., Yang, X., Su, Y., Li, W., Ma, S., Guo, Z., Chu, Q., & Ma, T. (2025) · Materials Characterization · doi:10.1016/j.matchar.2025.115598 · Cited by 4

A novel friction stir lap welding based on the two-layered large-helix-angle thread probe

Jin, W., Yuxi, Zhang, Z., Lu, K., Jin, Y., Yang, K., & Ji, S. (2026) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2026.05.022 · Cited by 4

Mechanical Properties and Fracture Behavior of the Refill Friction Stir Spot Welding Dissimilar Aluminum Alloy Joints

Wang, Y., Li, P., Jiang, H., Yang, K., Wu, X., Meng, Q., & Ji, S. (2024) · Transactions of the Indian Institute of Metals · doi:10.1007/s12666-024-03415-8 · Cited by 4

In-Depth Thermal Analysis of Different Pin Configurations in Friction Stir Spot Welding of Similar and Dissimilar Alloys

Alasdi, S. N., & Al‐Sabur, R. (2025) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp9060184 · Cited by 3

Recent Advances and Future Perspectives in Friction Stir Welding and Processing: A Review

Bîrsan, D. C., & Susac, F. (2026) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp10070217 · Cited by 2

Exploring the probe offset window for dynamic support friction stir welding of Al/Ti dissimilar alloys

Zuo, Y., Liu, H., Li, D., Gao, Y., & Li, X. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-13936-7 · Cited by 2

The combined effects of uniaxial pressure and defects on the mechanism of martensitic transformation in pure iron: A molecular dynamics study

Li, Q., Wang, H., Zhu, X., Yang, L., Liu, B., Ma, R., Han, F., Zhang, Z., Li, C., Wang, C., et al. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.109092 · Cited by 2

A machine learning predictive model on friction stir spot welding: changing plunge depth and dwelling time

Sardar, S., Misra, S., & Dey, P. P. (2026) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-026-02599-1 · Cited by 1

Fatigue performance and damage mechanisms of hybrid adhesive joints: ınfluence of surface coatings and adhesive thickness

Baykara, C., Akbulut, M., Oz, H. R., Teke, I. T., & Ertas, A. H. (2026) · Journal of Adhesion Science and Technology · doi:10.1080/01694243.2026.2673212 · Cited by 1

A novel dual-layer high-angle thread probe for fabricating tensile-fractured friction stir lap welding joint with downward-curved hook

Yanye, J. I. N., Zhenyang, L. I., Zhang, Z., Wenhan, J. I. N., Kaicheng, L. U., Yang, K., & Ji, S. (2026) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2026.104496 · Cited by 1

Monitoring of friction stirred spot weld quality for dissimilar Al6061 to polycarbonate using tool assisted thrust-torque signatures

Pattanaik, A. K., Nayak, L. P., Bisoyi, R. K., Pal, K., & Mishra, D. (2023) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/09544062231173280 · Cited by 1

Influence of secondary welding on microstructure and mechanical properties of friction stir welded joints of AA6061 and AZ31B alloys

Hu, L., Deng, Y., Zeng, J., Ou, Y., Qiu, Z., Zhou, Y., & Li, Z. (2023) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/09544062231203543 · Cited by 1

Improvement of production efficiency and optimization of exit-hole–free FSSW joints using adhesive-bonded consumable pin and lubrication

Bhardwaj, N., Narayanan, G. R., & Dixit, U. S. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-14295-z · Cited by 1

Hardness, shear strength, and microstructure of friction stir lap welded copper/aluminum using various parameters

Sun, Y., Ni, C., Xiao, H., Liu, Z., & Liu, D. (2025) · Materials Testing · doi:10.1515/mt-2024-0550

Numerical simulation of SAC305/Cu friction inlay welding based on Coupled Eulerian–Lagrangian approach

Zhao, Z., Zhang, L., Wei, J., & Ren, Z. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-14569-6

Microstructure Evolution And Interface Morphology Optimization in Synergistic Double-Sided Probeless Friction Stir Spot Welding of Dissimilar 7075/6061 Aluminum AlloysPreprint

Fan, W., Xu, H., Yang, X., Su, Y., Li, W., Ma, S., Guo, Z., Chu, Q., & Ma, T. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5248886

Interfacial characteristics and strengthening mechanisms of Al/steel extrinsic-riveting friction stir lap welding joint

Meng, X., Gao, J., Wang, F., Xie, Y., Huang, T., Li, J., Zhao, Y., & Huang, Y. (2025) · Welding International · doi:10.1080/09507116.2025.2497371

Refill Friction Stir Spot Welding 6063/2060 Al Alloys: Effect of Tool Plunging Speed on Microstructure and Properties of the Welded Joints

Liu, X., & Li, Z. (2025) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-025-11951-7

An investigation on the influence of Nickel-plating thickness on joint properties during pulsed laser welding of Aluminum and CopperPreprint

Singh, R., Arora, N., & Choudhary, A. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5520676

Effect of adhesive thickness and adherend types on the mechanical properties of single-lap bonded joints

Yang, K., Su, Z., Liang, F., Yue, Y., Dong, P., & Liu, Z. (2026) · Journal of Reinforced Plastics and Composites · doi:10.1177/07316844261470228

Optimization of Friction Stir Welding Parameters for Improving the Mechanical Properties of Aluminum Alloy Joints

Pratisna, P., Susilo, F. H., Hidayat, S. W., & Aryanto, D. (2026) · Journal of Renewable Energy and Smart Device · doi:10.66314/joresd.v4i2.1567

Friction Stir Welding: A Large-Scale Scientometric Analysis of Research Impact and Dynamics Over Three Decades

Ahmed, M. M. Z., Fydrych, D., Çam, G., Ezirmik, K. V., El-Aty, A. A., Ouis, A., El-Sayed, T. A., & Habba, M. I. A. (2026) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-026-15326-4

Microstructural formation and mechanical performance of friction stir double-riveting welded Al-Cu joints

Ji, S., Zhang, Z., Gong, P., Liu, H., Cui, X., & ZHANG, Y. (2022) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2022.11.010 · Cited by 24

A Novel Friction Stir Spot Riveting of Al/Cu Dissimilar Materials

Liu, J., Song, Q., Song, L., Ji, S., Li, M., Jia, Z., & Yang, K. (2020) · Acta Metallurgica Sinica (English Letters) · doi:10.1007/s40195-020-01092-2 · Cited by 11

Microstructure and mechanical properties of dissimilar Al–Cu joints by friction stir welding

ZHANG, Q.-Z., Gong, W., & Liu, W. (2015) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(15)63783-9 · Cited by 102

Study on the effect of residence time on the microstructure evolution of aluminum/copper friction stir double-riveting welded joints

Yang, J., Cui, X., Ma, L., & Zhang, S. (2026) · International Conference on Optics, Electronics, and Communication Engineering (OECE) · doi:10.1117/12.3124200

Feasibility Study of Friction Stir Welding of Dissimilar Metals between 6063 Aluminium Alloy and Pure Copper

Rojanapanya, K., Canyook, R., & Fakpan, K. (2017) · Naresuan University Engineering Journal · doi:10.14456/nuej.2017.12 · Cited by 2