Efficient implementation of superquadric particles in Discrete Element Method within an open-source framework
Open accessThe DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Abstract
Particle shape representation is a fundamental problem in the Discrete Element Method (DEM). Spherical particles with well known contact force models remain popular in DEM due to their relative simplicity in terms of ease of implementation and low computational cost. However, in real applications particles are mostly non-spherical, and more sophisticated particle shape models, like superquadric shape, must be introduced in DEM. The superquadric shape can be considered as an extension of spherical or ellipsoidal particles and can be used for modeling of spheres, ellipsoids, cylinder-like and box(dice)-like particles just varying five shape parameters. In this study we present an efficient C++ implementation of superquadric particles within the open-source and parallel DEM package LIGGGHTS. To reduce computational time several ideas are employed. In the particle–particle contact detection routine we use the minimum bounding spheres and the oriented bounding boxes to reduce the number of potential contact pairs. For the particle–wall contact an accurate analytical solution was found. We present all necessary mathematics for the contact detection and contact force calculation. The superquadric DEM code implementation was verified on test cases such as angle of repose and hopper/silo discharge. The simulation results are in good agreement with experimental data and are presented in this paper. We show adequacy of the superquadric shape model and robustness of the implemented superquadric DEM code.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fast Parallel Algorithms for Short-Range Molecular Dynamics
Plimpton, S. (1995) · Journal of Computational Physics · doi:10.1006/jcph.1995.1039 · Cited by 44,721
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527 · cited 1×
“The Discrete Element Method (DEM), developed by Cundall and Strack [14], has proven to be an efficient tool for modeling granular materials.”
MethodComputer "Experiments" on Classical Fluids. I. Thermodynamical Properties of Lennard-Jones Molecules
Verlet, L. (1967) · Physical Review · doi:10.1103/physrev.159.98 · Cited by 9,534
Discrete particle simulation of particulate systems: Theoretical developments
Zhu, H. P., Zhou, Z. Y., Yang, R. Y., & Yu, A. B. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2006.12.089 · Cited by 2,055
Models, algorithms and validation for opensource DEM and CFD-DEM
Kloss, C., Goniva, C., Hager, A., Amberger, S., & Pirker, S. (2012) · Progress in Computational Fluid Dynamics, An International Journal · doi:10.1504/pcfd.2012.047457 · Cited by 1,824
Self-citationDiscrete particle simulation of particulate systems: A review of major applications and findings
Zhu, H. P., Zhou, Z. Y., Yang, R. Y., & Yu, A. B. (2008) · Chemical Engineering Science · doi:10.1016/j.ces.2008.08.006 · Cited by 1,473
Ericson, C. (2004) · CRC Press eBooks · doi:10.1201/b14581 · Cited by 1,196
Cundall, P. A. (1988) · International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts · doi:10.1016/0148-9062(88)92293-0 · Cited by 1,158
Comparison of contact-force models for the simulation of collisions in DEM-based granular flow codes
Di Renzo, A., & Di Maio, F. P. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2003.09.037 · Cited by 1,127
Superquadrics and Angle-Preserving Transformations
Barr (1981) · IEEE Computer Graphics and Applications · doi:10.1109/mcg.1981.1673799 · Cited by 1,100
Assessment of rolling resistance models in discrete element simulations
Ai, J., Chen, J.-F., Rotter, J. M., & Ooi, J. Y. (2011) · Powder Technology · doi:10.1016/j.powtec.2010.09.030 · Cited by 1,073
Sequential minimax search for a maximum
Kiefer, J. (1953) · Proceedings of the American Mathematical Society · doi:10.1090/s0002-9939-1953-0055639-3 · Cited by 1,000
Cleary, P. W., & Sawley, M. L. (2002) · Applied Mathematical Modelling · doi:10.1016/s0307-904x(01)00050-6 · Cited by 691
Lu, G., Third, J. R., & Müller, C. R. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2014.11.050 · Cited by 577
Curvature formulas for implicit curves and surfaces
Goldman, R. (2005) · Computer Aided Geometric Design · doi:10.1016/j.cagd.2005.06.005 · Cited by 443
Favier, J. F., Abbaspour-Fard, M. H., Kremmer, M., & Raji, A. O. (1999) · Engineering Computations · doi:10.1108/02644409910271894 · Cited by 431
A study on the validity of the multi-sphere Discrete Element Method
Kruggel-Emden, H., Rickelt, S., Wirtz, S., & Scherer, V. (2008) · Powder Technology · doi:10.1016/j.powtec.2008.04.037 · Cited by 362
Large scale industrial DEM modelling
Cleary, P. W. (2004) · Engineering Computations · doi:10.1108/02644400410519730 · Cited by 350
Symplectic quaternion scheme for biophysical molecular dynamics
Miller, T. F., Eleftheriou, M., Pattnaik, P., Ndirango, A., Newns, D., & Martyna, G. J. (2002) · The Journal of Chemical Physics · doi:10.1063/1.1473654 · Cited by 344
Marigo, M., & Stitt, E. H. (2015) · KONA Powder and Particle Journal · doi:10.14356/kona.2015016 · Cited by 270
A fast contact detection algorithm for 3-D discrete element method
Nezami, E. G., Hashash, Y. M. A., Zhao, D., & Ghaboussi, J. (2004) · Computers and Geotechnics · doi:10.1016/j.compgeo.2004.08.002 · Cited by 249
Segmentation and Recovery of Superquadrics
Jaklič, A., Leonardis, A., & Solina, F. (2000) · Computational Imaging and Vision · doi:10.1007/978-94-015-9456-1 · Cited by 238
DEM prediction of industrial and geophysical particle flows
Cleary, P. W. (2010) · Particuology · doi:10.1016/j.partic.2009.05.006 · Cited by 221
Investigation of adequacy of multi-sphere approximation of elliptical particles for DEM simulations
Markauskas, D., Kačianauskas, R., Džiugys, A., & Navakas, R. (2010) · Granular Matter · doi:10.1007/s10035-009-0158-y · Cited by 220
Distinct element modelling of non-spherical frictionless particle flow
Langston, P. A., Al-Awamleh, M. A., Fraige, F. Y., & Asmar, B. N. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2003.10.008 · Cited by 202
A 3-D discrete-element method for dry granular flows of ellipsoidal particles
Vu-Quoc, L., Zhang, X., & Walton, O. R. (2000) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(99)00337-0 · Cited by 192
Flow characteristics and discharge rate of ellipsoidal particles in a flat bottom hopper
Liu, S. D., Zhou, Z. Y., Zou, R. P., Pinson, D., & Yu, A. B. (2014) · Powder Technology · doi:10.1016/j.powtec.2013.11.001 · Cited by 187
Höhner, D., Wirtz, S., & Scherer, V. (2013) · Powder Technology · doi:10.1016/j.powtec.2013.11.023 · Cited by 158
Energy-conserving contact interaction models for arbitrarily shaped discrete elements
Feng, Y. T., Han, K., & Owen, D. R. J. (2011) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2011.02.010 · Cited by 138
Dong, K., Wang, C., & Yu, A. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2014.12.059 · Cited by 134
Kodam, M., Bharadwaj, R., Curtis, J. S., Hancock, B. C., & Wassgren, C. R. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.08.007 · Cited by 120
Algorithm for numerical integration of the rigid-body equations of motion
Omelyan, I. P. (1998) · Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics · doi:10.1103/physreve.58.1169 · Cited by 91
A New Leapfrog Integrator of Rotational Motion. The Revised Angular-Momentum Approach
Omelyan, I. P. (1999) · Molecular Simulation · doi:10.1080/08927029908022097 · Cited by 46
Dynamic Collision Detection using Oriented Bounding Boxes
Eberly, D. H. (2016) · Cited by 41
Shape selection menu for grand scale discontinua systems
Rougier, E., Munjiza, A., & Latham, J. P. (2004) · Engineering Computations · doi:10.1108/02644400410519820 · Cited by 13
Cited by
A review of recent development for the CFD-DEM investigations of non-spherical particles
Ma, H., Zhou, L., Liu, Z., Chen, M., Xia, X., & Zhao, Y. (2022) · Powder Technology · doi:10.1016/j.powtec.2022.117972 · Cited by 286
Metadata
- Authors
- Podlozhnyuk, A., Pirker, S., & Kloss, C.
- Venue
- Computational Particle Mechanics
- Publisher
- Elsevier BV
- Published
- 2017-01
- Volume
- 4
- Issue
- 1
- Pages
- 101-118
- ISSN
- 2196-4378 (ISSN-L)
- 2196-4386
- OpenAlex
- W2520508848
- Cited by
- 297
- References
- 35
- FWCI
- 13.82
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.