Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Sign Up
Cited by 328

The DOI matches its Crossref record; 69 of the 69 references it cites were found in a registry or an index.

Eco-Friendly Cutting Fluids in Minimum Quantity Lubrication Assisted Machining: A Review on the Perception of Sustainable Manufacturing

Open access
Sen, Binayak, Mia, Mozammel, Krolczyk, G. M., Mandal, Uttam Kumar, Mondal, Sankar Prasad·2021·International Journal of Precision Engineering and Manufacturing-Green Technology
DOI 10.1007/s40684-019-00158-6
Open this paper in CoChat — free account

Abstract

In modern days, the conception of sustainability has progressively advanced and has begun receiving global interest. Thus, sustainability is an imperative idea in modern research. Considering the recent trend, this review paper presents a summary of the previously published research articles on minimum quantity lubrication (MQL) assisted machining. The requirement to stir towards sustainability motivated the researchers to revise the effects of substitute lubrication methods on the machining. Conventional lubri-cooling agents are still extensively employed when machining of engineering alloys, but the majority of the recent papers have depicted that the utilization of vegetable oil, nanofluids, and nanoplatelets in MQL system confers superior machining performances as compared to conventional lubrication technology. In actual, the definite principle of this manuscript is to re-examine modern advancements in the MQL technique and also explore the benefits of the vegetable oil and nanofluid as a lubricant. In brief, this paper is a testimony to the advancing capabilities of eco-friendly MQL technique which is a viable alternative to the flood lubrication technology, and the outcomes of this review work can be contemplated as a movement towards sustainable machining.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1007/s40684-019-00158-6

Cites

69 of 69 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 69 references

Research works printed but not linked: 106

  1. Masoudi, S., Esfahani, M. J., Jafarian, F., & Mirsoleimani, S. A. (2019). Comparison the effect of MQL, wet and dry turning on surface topography, cylindricity tolerance and sustainability. International Journal of Precision Engineering and Manufacturing-Green Technology. https://doi.org/10.1007/s40684-019-00042-3. · doi:10.1007/s40684-019-00042-3
  2. Weinert, K., Inasaki, I., Sutherland, J., & Wakabayashi, T. (2004). Dry machining and minimum quantity lubrication. CIRP Annals-Manufacturing Technology, 53(2), 511–537. · doi:10.1016/s0007-8506(07)60027-4
  3. Inasaki, I. (2012). Towards symbiotic machining processes. International Journal of Precision Engineering and Manufacturing, 13(7), 1053–1057. · doi:10.1007/s12541-012-0137-9
  4. Goldberg, M. (2012). Improving productivity by using innovative metal cutting solutions with an emphasis on green machining. International Journal of Machining and Machinability of Materials, 12(1–2), 17–125.
  5. Iyappan, S. K., & Ghosh, A. (2019). Small quantity lubrication assisted end milling of aluminium using sunflower oil. International Journal of Precision Engineering and Manufacturing-Green Technology. https://doi.org/10.1007/s40684-019-00081-w. · doi:10.1007/s40684-019-00081-w
  6. Khan, A. M., Jamil, M., Salonitis, K., Sarfraz, S., Zhao, W., He, N., et al. (2019). Multi-objective optimization of energy consumption and surface quality in nanofluid sqcl assisted face milling. Energies, 12(4), 710. · doi:10.3390/en12040710
  7. ManojKumar, K., & Ghosh, A. (2015). Synthesis of MWCNT nanofluid and evaluation of its potential besides soluble oil as micro cooling-lubrication medium in SQL grinding. The International Journal of Advanced Manufacturing Technology, 77(9), 1955–1964. https://doi.org/10.1007/s00170-014-6587-8. · doi:10.1007/s00170-014-6587-8
  8. Astakhov, V. P. (2008). Ecological machining: near-dry machining. In Machining (pp. 195–223). London: Springer. · doi:10.1007/978-1-84800-213-5_7
  9. Khan, M., Mithu, M., & Dhar, N. (2009). Effects of minimum quantity lubrication on turning AISI 9310 alloy steel using vegetable oil-based cutting fluid. Journal of Materials Processing Technology, 209(15), 5573–5583. · doi:10.1016/j.jmatprotec.2009.05.014
  10. Attanasio, A., Gelfi, M., Giardini, C., & Remino, C. (2006). Minimal quantity lubrication in turning: effect on tool wear. Wear, 260(3), 333–338. · doi:10.1016/j.wear.2005.04.024
  11. Maruda, R. W., Krolczyk, G. M., Nieslony, P., Wojciechowski, S., Michalski, M., & Legutko, S. (2016). The influence of the cooling conditions on the cutting tool wear and the chip formation mechanism. Journal of Manufacturing Processes, 24, 107–115. https://doi.org/10.1016/j.jmapro.2016.08.006. · doi:10.1016/j.jmapro.2016.08.006
  12. An, Q., & Dang, J. (2019). Cooling effects of cold mist jet with transient heat transfer on high-speed cutting of titanium alloy. International Journal of Precision Engineering and Manufacturing-Green Technology. https://doi.org/10.1007/s40684-019-00076-7. · doi:10.1007/s40684-019-00076-7
  13. Nath, C., Kapoor, S. G., DeVor, R. E., Srivastava, A. K., & Iverson, J. (2012). Design and evaluation of an atomization-based cutting fluid spray system in turning of titanium alloy. Journal of Manufacturing Processes, 14(4), 452–459. https://doi.org/10.1016/j.jmapro.2012.09.002. · doi:10.1016/j.jmapro.2012.09.002
  14. Pervaiz, S., Anwar, S., Qureshi, I., & Ahmed, N. (2019). Recent advances in the machining of titanium alloys using minimum quantity lubrication (MQL) based techniques. International Journal of Precision Engineering and Manufacturing-Green Technology, 6(1), 133–145. https://doi.org/10.1007/s40684-019-00033-4. · doi:10.1007/s40684-019-00033-4
  15. Dureja, J., Singh, R., Singh, T., Singh, P., Dogra, M., & Bhatti, M. S. (2015). Performance evaluation of coated carbide tool in machining of stainless steel (AISI 202) under minimum quantity lubrication (MQL). International Journal of Precision Engineering and Manufacturing-Green Technology, 2(2), 123–129. · doi:10.1007/s40684-015-0016-9
  16. Rahman, M., Kumar, A. S., & Salam, M. (2002). Experimental evaluation on the effect of minimal quantities of lubricant in milling. International Journal of Machine Tools and Manufacture, 42(5), 539–547. · doi:10.1016/s0890-6955(01)00160-2
  17. Hadad, M., & Sadeghi, B. (2012). Thermal analysis of minimum quantity lubrication-MQL grinding process. International Journal of Machine Tools and Manufacture, 63, 1–15. https://doi.org/10.1016/j.ijmachtools.2012.07.003. · doi:10.1016/j.ijmachtools.2012.07.003
  18. Jang, D.-Y., Jung, J., & Seok, J. (2016). Modeling and parameter optimization for cutting energy reduction in MQL milling process. International Journal of Precision Engineering and Manufacturing-Green Technology, 3(1), 5–12. https://doi.org/10.1007/s40684-016-0001-y. · doi:10.1007/s40684-016-0001-y
  19. Singh, G., Gupta, M. K., Mia, M., & Sharma, V. S. (2018). Modeling and optimization of tool wear in MQL-assisted milling of Inconel 718 superalloy using evolutionary techniques. The International Journal of Advanced Manufacturing Technology, 97(1), 481–494. https://doi.org/10.1007/s00170-018-1911-3. · doi:10.1007/s00170-018-1911-3
  20. Upadhyay, V., Jain, P., & Mehta, N. (2013). Machining with minimum quantity lubrication: a step towards green manufacturing. International Journal of Machining and Machinability of Materials, 13(4), 349–371. · doi:10.1504/ijmmm.2013.054277
  21. Maruda, R. W., Krolczyk, G. M., Feldshtein, E., Pusavec, F., Szydlowski, M., Legutko, S., et al. (2016). A study on droplets sizes, their distribution and heat exchange for minimum quantity cooling lubrication (MQCL). International Journal of Machine Tools and Manufacture, 100, 81–92. · doi:10.1016/j.ijmachtools.2015.10.008
  22. Kuo, C., Yang, J., & Wen, J. (2019). Wear behaviour and sustainability of coated abrasives in grinding of aluminium alloy using minimum quantity lubrication. International Journal of Precision Engineering and Manufacturing-Green Technology. https://doi.org/10.1007/s40684-019-00108-2. · doi:10.1007/s40684-019-00108-2
  23. Jawahir, I., & Dillon, O. Sustainable manufacturing processes: new challenges for developing predictive models and optimization techniques. In Proceedings of the first international conference on sustainable manufacturing, Montreal, Canada, 2007 (pp. 1–19).
  24. Sidik, N. A. C., Samion, S., Ghaderian, J., & Yazid, M. N. A. W. M. (2017). Recent progress on the application of nanofluids in minimum quantity lubrication machining: a review. International Journal of Heat and Mass Transfer, 108, 79–89. · doi:10.1016/j.ijheatmasstransfer.2016.11.105
  25. Sen, B., Mia, M., Mandal, U. K., Dutta, B., & Mondal, S. P. (2019). Multi-objective optimization for MQL-assisted end milling operation: an intelligent hybrid strategy combining GEP and NTOPSIS. Neural Computing and Applications. https://doi.org/10.1007/s00521-019-04450-z. · doi:10.1007/s00521-019-04450-z
  26. Sharma, V. S., Singh, G., & Sørby, K. (2015). A review on minimum quantity lubrication for machining processes. Materials and Manufacturing Processes, 30(8), 935–953. · doi:10.1080/10426914.2014.994759
  27. Rodriguez, V., Sukumaran, J., Schlarb, A. K., & De Baets, P. (2016). Influence of solid lubricants on tribological properties of polyetheretherketone (PEEK). Tribology International, 103, 45–57. · doi:10.1016/j.triboint.2016.06.037
  28. Bijwe, J., Kumar, K., Panda, J. N., Parida, T., & Trivedi, P. (2016). Design and development of high performance tribo-composites based on synergism in two solid lubricants. Composites Part B Engineering, 94, 399–410. · doi:10.1016/j.compositesb.2016.03.034
  29. Sen, B., Hussain, S. A. I., Mia, M., Mandal, U. K., & Mondal, S. P. (2019). Selection of an ideal MQL-assisted milling condition: an NSGA-II-coupled TOPSIS approach for improving machinability of Inconel 690. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-019-03620-6. · doi:10.1007/s00170-019-03620-6
  30. Ojolo, S., Amuda, M., Ogunmola, O., & Ononiwu, C. (2008). Experimental determination of the effect of some straight biological oils on cutting force during cylindrical turning. Matéria (Rio de Janeiro), 13(4), 650–663. · doi:10.1590/s1517-70762008000400011
  31. Jianzhong, W. J. Z. (2005). On formation and breakup of boundary lubricating layer [J]. Lubrication Engineering, 6, 001.
  32. Li, B., Li, C., Zhang, Y., Wang, Y., Yang, M., Jia, D., et al. (2017). Effect of the physical properties of different vegetable oil-based nanofluids on MQLC grinding temperature of Ni-based alloy. The International Journal of Advanced Manufacturing Technology, 89(9–12), 3459–3474. · doi:10.1007/s00170-016-9324-7
  33. Wang, Y., Li, C., Zhang, Y., Yang, M., Zhang, X., Zhang, N., et al. (2017). Experimental evaluation on tribological performance of the wheel/workpiece interface in minimum quantity lubrication grinding with different concentrations of Al2O3 nanofluids. Journal of Cleaner Production, 142, 3571–3583. · doi:10.1016/j.jclepro.2016.10.110
  34. Bai, X., Li, C., Dong, L., & Yin, Q. (2019). Experimental evaluation of the lubrication performances of different nanofluids for minimum quantity lubrication (MQL) in milling Ti-6Al-4V. The International Journal of Advanced Manufacturing Technology, 101(9–12), 2621–2632. · doi:10.1007/s00170-018-3100-9
  35. Zhang, Y., Li, C., Jia, D., Li, B., Wang, Y., Yang, M., et al. (2016). Experimental study on the effect of nanoparticle concentration on the lubricating property of nanofluids for MQL grinding of Ni-based alloy. Journal of Materials Processing Technology, 232, 100–115. · doi:10.1016/j.jmatprotec.2016.01.031
  36. Abbas, A. T., Gupta, M. K., Soliman, M. S., Mia, M., Hegab, H., Luqman, M., et al. (2019). Sustainability assessment associated with surface roughness and power consumption characteristics in nanofluid MQL-assisted turning of AISI 1045 steel. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-019-04325-6. · doi:10.1007/s00170-019-04325-6
  37. Sarafraz, M., Hormozi, F., & Nikkhah, V. (2016). Thermal performance of a counter-current double pipe heat exchanger working with COOH-CNT/water nanofluids. Experimental Thermal and Fluid Science, 78, 41–49. · doi:10.1016/j.expthermflusci.2016.05.014
  38. Mandal, B., Singh, R., Das, S., & Banerjee, S. (2012). Development of a grinding fluid delivery technique and its performance evaluation. Materials and Manufacturing Processes, 27(4), 436–442. · doi:10.1080/10426914.2011.585487
  39. Mao, C., Zou, H., Zhou, X., Huang, Y., Gan, H., & Zhou, Z. (2014). Analysis of suspension stability for nanofluid applied in minimum quantity lubricant grinding. The International Journal of Advanced Manufacturing Technology, 71(9–12), 2073–2081. · doi:10.1007/s00170-014-5642-9
  40. Sharma, A. K., Singh, R. K., Dixit, A. R., & Tiwari, A. K. (2016). Characterization and experimental investigation of Al2O3 nanoparticle based cutting fluid in turning of AISI 1040 steel under minimum quantity lubrication (MQL). Materials Today: Proceedings, 3(6), 1899–1906.
  41. Padmini, R., Krishna, P. V., & Rao, G. K. M. (2014). Performance assessment of micro and nano solid lubricant suspensions in vegetable oils during machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229(12), 2196–2204. https://doi.org/10.1177/0954405414548465. · doi:10.1177/0954405414548465
  42. Zhang, D., Li, C., Zhang, Y., Jia, D., & Zhang, X. (2015). Experimental research on the energy ratio coefficient and specific grinding energy in nanoparticle jet MQL grinding. The International Journal of Advanced Manufacturing Technology, 78(5–8), 1275–1288. · doi:10.1007/s00170-014-6722-6
  43. Nam, J. S., Lee, P.-H., & Lee, S. W. (2011). Experimental characterization of micro-drilling process using nanofluid minimum quantity lubrication. International Journal of Machine Tools and Manufacture, 51(7–8), 649–652. · doi:10.1016/j.ijmachtools.2011.04.005
  44. Nam, J. S., Kim, D. H., & Lee, S. W. A parametric analysis on micro-drilling process with nanofluid minimum quantity lubrication. In ASME 2013 International Manufacturing Science and Engineering Conference collocated with the 41st North American Manufacturing Research Conference, 2013 (pp. V002T004A016–V002T004A016): American Society of Mechanical Engineers.
  45. Sarhan, A. A., Sayuti, M., & Hamdi, M. (2012). Reduction of power and lubricant oil consumption in milling process using a new SiO 2 nanolubrication system. The International Journal of Advanced Manufacturing Technology, 63(5–8), 505–512. · doi:10.1007/s00170-012-3940-7
  46. Ooi, M. E., Sayuti, M., & Sarhan, A. A. (2015). Fuzzy logic-based approach to investigate the novel uses of nano suspended lubrication in precise machining of aerospace AL tempered grade 6061. Journal of Cleaner Production, 89, 286–295. · doi:10.1016/j.jclepro.2014.11.006
  47. You, J., & Gao, Y. A study of carbon nanotubes as cutting grains for nano machining. In Advanced Materials Research, 2009 (Vol. 76, pp. 502–507): Trans Tech Publ. · doi:10.4028/www.scientific.net/amr.76-78.502
  48. Rao, S. N., Satyanarayana, B., & Venkatasubbaiah, K. (2011). Experimental estimation of tool wear and cutting temperatures in MQL using cutting fluids with CNT inclusion. International Journal of Engineering Science and Technology, 3(4).
  49. Prabhu, S., & Vinayagam, B. K. (2012). AFM investigation in grinding process with nanofluids using Taguchi analysis. The International Journal of Advanced Manufacturing Technology, 60(1–4), 149–160. · doi:10.1007/s00170-011-3599-5
  50. Huang, H., Tu, J., Gan, L., & Li, C. (2006). An investigation on tribological properties of graphite nanosheets as oil additive. Wear, 261(2), 140–144. · doi:10.1016/j.wear.2005.09.010
  51. Marcon, A., Melkote, S., Kalaitzidou, K., & DeBra, D. (2010). An experimental evaluation of graphite nanoplatelet based lubricant in micro-milling. CIRP Annals, 59(1), 141–144. · doi:10.1016/j.cirp.2010.03.083
  52. Alberts, M., Kalaitzidou, K., & Melkote, S. (2009). An investigation of graphite nanoplatelets as lubricant in grinding. International Journal of Machine Tools and Manufacture, 49(12–13), 966–970. · doi:10.1016/j.ijmachtools.2009.06.005
  53. Ravuri, B. P., Goriparthi, B. K., Revuru, R. S., & Anne, V. G. (2016). Performance evaluation of grinding wheels impregnated with graphene nanoplatelets. The International Journal of Advanced Manufacturing Technology, 85(9–12), 2235–2245. · doi:10.1007/s00170-015-7459-6
  54. Pavan, R. B., Gopal, A. V., Amrita, M., & Bhanu, K. G. (2017). Experimental investigation of graphene nanoplatelets–based minimum quantity lubrication in grinding Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. https://doi.org/10.1177/0954405417728311. · doi:10.1177/0954405417728311
  55. Wang, Y., Li, C., Zhang, Y., Li, B., Yang, M., Zhang, X., et al. (2016). Experimental evaluation of the lubrication properties of the wheel/workpiece interface in MQL grinding with different nanofluids. Tribology International, 99, 198–210. · doi:10.1016/j.triboint.2016.03.023
  56. Marsalek, R. (2014). Particle size and zeta potential of ZnO. APCBEE procedia, 9, 13–17. · doi:10.1016/j.apcbee.2014.01.003
  57. Salehi, J., Heyhat, M., & Rajabpour, A. (2013). Enhancement of thermal conductivity of silver nanofluid synthesized by a one-step method with the effect of polyvinylpyrrolidone on thermal behavior. Applied Physics Letters, 102(23), 231907. · doi:10.1063/1.4809998
  58. Thakur, D., Ramamoorthy, B., & Vijayaraghavan, L. (2009). Optimization of minimum quantity lubrication parameters in high speed turning of superalloy Inconel 718 for sustainable development. Signal, 20(300), 200.
  59. Che Haron, C. H., Ghani, J. A., Kasim, M. S., Soon, T., Ibrahim, G. A., & Sulaiman, M. A. Surface intergrity of Inconel 718 under MQL condition. In Advanced Materials Research, 2011 (Vol. 150, pp. 1667–1672): Trans Tech Publ. · doi:10.4028/www.scientific.net/amr.150-151.1667
  60. Stephenson, D., Skerlos, S. J., King, A. S., & Supekar, S. D. (2014). Rough turning Inconel 750 with supercritical CO2-based minimum quantity lubrication. Journal of Materials Processing Technology, 214(3), 673–680. · doi:10.1016/j.jmatprotec.2013.10.003
  61. Khan, A., Jamil, M., Mia, M., Pimenov, D., Gasiyarov, V., Gupta, M., et al. (2018). Multi-objective optimization for grinding of AISI D2 steel with Al2O3 wheel under MQL. Materials, 11(11), 2269. https://doi.org/10.3390/ma11112269. · doi:10.3390/ma11112269
  62. Barczak, L. M., Batako, A. D. L., & Morgan, M. N. (2010). A study of plane surface grinding under minimum quantity lubrication (MQL) conditions. International Journal of Machine Tools and Manufacture, 50(11), 977–985. https://doi.org/10.1016/j.ijmachtools.2010.07.005. · doi:10.1016/j.ijmachtools.2010.07.005
  63. de Jesus Oliveira, D., Guermandi, L. G., Bianchi, E. C., Diniz, A. E., de Aguiar, P. R., & Canarim, R. C. (2012). Improving minimum quantity lubrication in CBN grinding using compressed air wheel cleaning. Journal of Materials Processing Technology, 212(12), 2559–2568. · doi:10.1016/j.jmatprotec.2012.05.019
  64. Li, K.-M., & Lin, C.-P. (2012). Study on minimum quantity lubrication in micro-grinding. The International Journal of Advanced Manufacturing Technology, 62(1–4), 99–105.
  65. Balan, A., Vijayaraghavan, L., & Krishnamurthy, R. (2013). Minimum quantity lubricated grinding of Inconel 751 alloy. Materials and Manufacturing Processes, 28(4), 430–435. · doi:10.1080/10426914.2013.763965
  66. Hadad, M., & Hadi, M. (2013). An investigation on surface grinding of hardened stainless steel S34700 and aluminum alloy AA6061 using minimum quantity of lubrication (MQL) technique. The International Journal of Advanced Manufacturing Technology, 68(9–12), 2145–2158. · doi:10.1007/s00170-013-4830-3
  67. Rabiei, F., Rahimi, A., Hadad, M., & Ashrafijou, M. (2015). Performance improvement of minimum quantity lubrication (MQL) technique in surface grinding by modeling and optimization. Journal of Cleaner Production, 86, 447–460. · doi:10.1016/j.jclepro.2014.08.045
  68. Sridharan, U., & Malkin, S. (2009). Effect of minimum quantity lubrication (MQL) with nanofluid on grinding behavior and thermal distortion. Trans NAMRI/SME, 37, 629–636.
  69. Lee, P.-H., Lee, S. W., Lim, S.-H., Lee, S.-H., Ko, H. S., & Shin, S.-W. (2015). A study on thermal characteristics of micro-scale grinding process using nanofluid minimum quantity lubrication (MQL). International journal of precision engineering and manufacturing, 16(9), 1899–1909. · doi:10.1007/s12541-015-0247-2
  70. Sun, J., Wong, Y., Rahman, M., Wang, Z., Neo, K., Tan, C., et al. (2006). Effects of coolant supply methods and cutting conditions on tool life in end milling titanium alloy. Machining Science and Technology, 10(3), 355–370. · doi:10.1080/10910340600902181
  71. Li, H., Zeng, H., & Chen, X. (2006). An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts. Journal of Materials Processing Technology, 180(1–3), 296–304.
  72. Davim, J., Sreejith, P., Gomes, R., & Peixoto, C. (2006). Experimental studies on drilling of aluminium (AA1050) under dry, minimum quantity of lubricant, and flood-lubricated conditions. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220(10), 1605–1611. · doi:10.1243/09544054jem557
  73. Bhowmick, S., Lukitsch, M. J., & Alpas, A. T. (2010). Dry and minimum quantity lubrication drilling of cast magnesium alloy (AM60). International Journal of Machine Tools and Manufacture, 50(5), 444–457. · doi:10.1016/j.ijmachtools.2010.02.001
  74. Bhowmick, S., & Alpas, A. (2011). The role of diamond-like carbon coated drills on minimum quantity lubrication drilling of magnesium alloys. Surface & Coatings Technology, 205(23–24), 5302–5311. · doi:10.1016/j.surfcoat.2011.05.037
  75. Fox-Rabinovich, G., Dasch, J., Wagg, T., Yamamoto, K., Veldhuis, S., Dosbaeva, G., et al. (2011). Cutting performance of different coatings during minimum quantity lubrication drilling of aluminum silicon B319 cast alloy. Surface & Coatings Technology, 205(16), 4107–4116. · doi:10.1016/j.surfcoat.2011.03.006
  76. Kilickap, E., Huseyinoglu, M., & Yardimeden, A. (2011). Optimization of drilling parameters on surface roughness in drilling of AISI 1045 using response surface methodology and genetic algorithm. The International Journal of Advanced Manufacturing Technology, 52(1–4), 79–88. · doi:10.1007/s00170-010-2710-7
  77. Brinksmeier, E., Pecat, O., & Rentsch, R. (2015). Quantitative analysis of chip extraction in drilling of Ti6Al4 V. CIRP Annals, 64(1), 93–96. · doi:10.1016/j.cirp.2015.04.064
  78. Wang, Z., Rahman, M., Wong, Y., Neo, K., Sun, J., Tan, C., et al. (2009). Study on orthogonal turning of titanium alloys with different coolant supply strategies. The International Journal of Advanced Manufacturing Technology, 42(7–8), 621. · doi:10.1007/s00170-008-1627-x
  79. Grguraš, D., Sterle, L., Krajnik, P., & Pušavec, F. (2019). A novel cryogenic machining concept based on a lubricated liquid carbon dioxide. International Journal of Machine Tools and Manufacture, 145, 103456. https://doi.org/10.1016/j.ijmachtools.2019.103456. · doi:10.1016/j.ijmachtools.2019.103456
  80. Huang, S., Lv, T., Wang, M., & Xu, X. (2018). Effects of machining and oil mist parameters on electrostatic minimum quantity lubrication–EMQL turning process. International Journal of Precision Engineering and Manufacturing-Green Technology, 5(2), 317–326. https://doi.org/10.1007/s40684-018-0034-5. · doi:10.1007/s40684-018-0034-5
  81. Libardi, A., Schmid, S., Sen, M., & Schneider, W. (2013). Evaluation of ionic fluids as lubricants in manufacturing. Journal of Manufacturing Processes, 15(4), 414–418. · doi:10.1016/j.jmapro.2013.06.005
  82. Goindi, G. S., Chavan, S. N., Mandal, D., Sarkar, P., & Jayal, A. D. (2015). Investigation of ionic liquids as novel metalworking fluids during minimum quantity lubrication machining of a plain carbon steel. Procedia CIRP, 26, 341–345. · doi:10.1016/j.procir.2014.09.002
  83. Pham, M.-Q., Yoon, H.-S., Khare, V., & Ahn, S.-H. (2014). Evaluation of ionic liquids as lubricants in micro milling–process capability and sustainability. Journal of Cleaner Production, 76, 167–173. · doi:10.1016/j.jclepro.2014.04.055
  84. Sani, A. S. A., Rahim, E. A., Sharif, S., & Sasahara, H. (2019). Machining performance of vegetable oil with phosphonium-and ammonium-based ionic liquids via MQL technique. Journal of Cleaner Production, 209, 947–964. · doi:10.1016/j.jclepro.2018.10.317
  85. Salaam, H., Taha, Z., Ya, T., & Shah, T. M. Y. Minimum quantity lubrication (MQL) using Ranque–Hilsch vortex tube (RHVT) for sustainable machining. In Applied Mechanics and Materials, 2012 (Vol. 217): Trans Tech Publ. · doi:10.4028/www.scientific.net/amm.217-219.2012
  86. Kırmacı, V. (2009). Exergy analysis and performance of a counter flow Ranque–Hilsch vortex tube having various nozzle numbers at different inlet pressures of oxygen and air. International Journal of Refrigeration, 32(7), 1626–1633. · doi:10.1016/j.ijrefrig.2009.04.007
  87. Selek, M., Tasdemir, S., Dincer, K., & Baskaya, S. (2011). Experimental examination of the cooling performance of Ranque–Hilsch vortex tube on the cutting tool nose point of the turret lathe through infrared thermography method. International Journal of Refrigeration, 34(3), 807–815. · doi:10.1016/j.ijrefrig.2010.11.008
  88. Liu, J., & Chou, Y. K. (2007). On temperatures and tool wear in machining hypereutectic Al–Si alloys with vortex-tube cooling. International Journal of Machine Tools and Manufacture, 47(3–4), 635–645. · doi:10.1016/j.ijmachtools.2006.04.008
  89. Boswell, B., & Islam, M. N. (2013). The challenge of adopting minimal quantities of lubrication for end milling aluminium. In IAENG Transactions on Engineering Technologies (pp. 713–724). Dordrecht: Springer.
  90. Mia, M., Singh, G., Gupta, M. K., & Sharma, V. S. (2018). Influence of Ranque-Hilsch vortex tube and nitrogen gas assisted MQL in precision turning of Al 6061-T6. Precision Engineering, 53, 289–299. https://doi.org/10.1016/j.precisioneng.2018.04.011. · doi:10.1016/j.precisioneng.2018.04.011
  91. Dhar, N., Kishore, N. S., Paul, S., & Chattopadhyay, A. (2002). The effects of cryogenic cooling on chips and cutting forces in turning AISI 1040 and AISI 4320 steels. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216(5), 713–724. · doi:10.1243/0954405021520409
  92. Ravi, S., & Kumar, M. P. (2011). Experimental investigations on cryogenic cooling by liquid nitrogen in the end milling of hardened steel. Cryogenics, 51(9), 509–515. · doi:10.1016/j.cryogenics.2011.06.006
  93. Huang, X., Zhang, X., Mou, H., Zhang, X., & Ding, H. (2014). The influence of cryogenic cooling on milling stability. Journal of Materials Processing Technology, 214(12), 3169–3178. · doi:10.1016/j.jmatprotec.2014.07.023
  94. Manimaran, G., & Venkatasamy, R. (2014). Influence of cryogenic cooling on surface grinding of stainless steel 316. Cryogenics, 59, 76–83. · doi:10.1016/j.cryogenics.2013.11.005
  95. Dix, M., Wertheim, R., Schmidt, G., & Hochmuth, C. (2014). Modeling of drilling assisted by cryogenic cooling for higher efficiency. CIRP Annals-Manufacturing Technology, 63(1), 73–76. · doi:10.1016/j.cirp.2014.03.080
  96. Su, Y., He, N., & Li, L. Effect of cryogenic minimum quantity lubrication (CMQL) on cutting temperature and tool wear in high-speed end milling of titanium alloys. In Applied Mechanics and Materials, 2010 (Vol. 34, pp. 1816-1821): Trans Tech Publ. · doi:10.4028/www.scientific.net/amm.34-35.1816
  97. Zhang, S., Li, J., & Lv, H. (2014). Tool wear and formation mechanism of white layer when hard milling H13 steel under different cooling/lubrication conditions. Advances in Mechanical Engineering, 6, 949308. · doi:10.1155/2014/949308
  98. Faverjon, P., Rech, J., Valiorgue, F., & Orset, M. (2015). Optimization of a drilling sequence under MQL to minimize the thermal distortion of a complex aluminum part. Production Engineering, 9(4), 505–515. · doi:10.1007/s11740-015-0614-y
  99. Clarens, A. F., Hayes, K. F., & Skerlos, S. J. (2006). Feasibility of metalworking fluids delivered in supercritical carbon dioxide. Journal of Manufacturing Processes, 8(1), 47–53. · doi:10.1016/s1526-6125(06)70101-3
  100. García, E., Méresse, D., Pombo, I., Dubar, M., & Sánchez, J. (2016). Role of frozen lubricant film on tribological behaviour and wear mechanisms in grinding. The International Journal of Advanced Manufacturing Technology, 82(5–8), 1017–1027. · doi:10.1007/s00170-015-7397-3
  101. Boswell, B., Islam, M. N., Davies, I. J., Ginting, Y., & Ong, A. K. (2017). A review identifying the effectiveness of minimum quantity lubrication (MQL) during conventional machining. The International Journal of Advanced Manufacturing Technology, 92(1–4), 321–340. · DOI · Paper page
  102. Skerlos, S. J., Hayes, K. F., Clarens, A. F., & Zhao, F. (2008). Current advances in sustainable metalworking fluids research. International journal of sustainable manufacturing, 1(1–2), 180–202. · doi:10.1504/ijsm.2008.019233
  103. Shokoohi, Y., & Shekarian, E. (2015). Application of nanofluids in machining processes-a review. Journal of Nanoscience and Technology, 28, 59–63.
  104. Boubekri, N., Shaikh, V., & Foster, P. R. (2010). A technology enabler for green machining: minimum quantity lubrication (MQL). Journal of Manufacturing Technology Management, 21(5), 556–566. · doi:10.1108/17410381011046968
  105. Weinert, K., Inasaki, I., Sutherland, J., & Wakabayashi, T. (2004). Dry machining and minimum quantity lubrication. CIRP Annals, 53(2), 511–537. · doi:10.1016/s0007-8506(07)60027-4
  106. Sayuti, M., Erh, O. M., Sarhan, A. A., & Hamdi, M. (2014). Investigation on the morphology of the machined surface in end milling of aerospace AL6061-T6 for novel uses of SiO2 nanolubrication system. Journal of Cleaner Production, 66, 655–663. · doi:10.1016/j.jclepro.2013.11.058

Cited by

See all 328

Metadata

Authors
Sen, B., Mia, M., Krolczyk, G. M., Mandal, U. K., & Mondal, S. P.
Venue
International Journal of Precision Engineering and Manufacturing-Green Technology
Publisher
Springer Science and Business Media LLC
Published
2019-10-15
Volume
8
Issue
1
Pages
249-280
ISSN
  • 2198-0810 (ISSN-L)
  • 2288-6206
DOI
10.1007/s40684-019-00158-6
OpenAlex
W2981126390
Cited by
328
References
69
FWCI
19.68
Type
journal article
Language
en
Open access
hybrid
Licence

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Eco-Friendly Cutting Fluids in Minimum Quantity Lubrication Assisted Machining: A Review on the Perception of Sustainable Manufacturing. https://app.cochat.ai/papers/10.1007/s40684-019-00158-6
The paper
Sen, B., Mia, M., Krolczyk, G. M., Mandal, U. K., & Mondal, S. P. (2021). Eco-Friendly Cutting Fluids in Minimum Quantity Lubrication Assisted Machining: A Review on the Perception of Sustainable Manufacturing. International Journal of Precision Engineering and Manufacturing-Green Technology. https://doi.org/10.1007/s40684-019-00158-6

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.