The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Modelling and thermodynamic properties of pure CO2 and flue gas sorption data on South African coals using Langmuir, Freundlich, Temkin, and extended Langmuir isotherm models
Open accessAbstract
Carbon sequestration in unmineable coal seams has been proposed as one of the most attractive technologies to mitigate carbon dioxide (CO 2) emissions in which CO 2 is stored in the microporous structure of the coal matrix in an adsorbed state. The CO 2 adsorption process is hence considered one of the more effective methodologies in environmental sciences. Thus, adsorption isotherm measurements and modelling are key important scientific measures required in understanding the adsorption system, mechanism, and process optimization in coalbeds. In this paper, three renowned and reliable adsorption isotherm models were employed including Langmuir, Freundlich, and Temkin for pure CO 2 adsorption data, and the extended-Langmuir model for multicomponent, such as flue gas mixture-adsorption data as investigated in this research work. Also, significant thermodynamics properties including the standard enthalpy change ($$\Delta H^\circ$$ΔH∘), entropy change ($$\Delta S^\circ$$ΔS∘), and Gibbs free energy ($$\Delta G^\circ$$ΔG∘) were assessed using the van’t Hoff equation. The statistical evaluation of the goodness-of-fit was done using three (3) statistical data analysis methods including correlation coefficient (R2), standard deviation (σ), and standard error (SE). The Langmuir isotherm model accurately represent the pure CO 2 adsorption on the coals than Freundlich and Temkin. The extended Langmuir gives best experimental data fit for the flue gas. The thermodynamic evaluations revealed that CO 2 adsorption on the South African coals is feasible, spontaneous, and exothermic; and the adsorption mechanism is a combined physical and chemical interaction between the adsorbate and the adsorbent.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479
Modelling and interpretation of adsorption isotherms
Ayawei, N., Ebelegi, A. N., & Wankasi, D. (2017) · Journal of Chemistry · doi:10.1155/2017/3039817 · Cited by 2,957
A.O, D. (2012) · IOSR Journal of Applied Chemistry · doi:10.9790/5736-0313845 · Cited by 1,934 · cited 3×
“Linearization of the above equation via logarithmic plot yields (Dada et al. 2012):”
BackgroundMethodFixed bed adsorption as affected by thermodynamics and kinetics: yellow tuff for CO2 capture
Ammendola, P., Raganati, F., Chirone, R., & Miccio, F. (2020) · Powder Technology · doi:10.1016/j.powtec.2020.06.075 · Cited by 88
Adelodun, A. A., Ngila, J. C., Kim, D.-G., & Jo, Y.-M. (2016) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2016.01.0014 · Cited by 78
Metadata
- Authors
- Mabuza, M., Premlall, K., & Daramola, M. O.
- Venue
- International Journal of Coal Science & Technology
- Published
- 2022-06-13
- Volume
- 9
- Issue
- 1
- ISSN
- 2095-8293 (ISSN-L)
- 2198-7823
- OpenAlex
- W4282570436
- Cited by
- 159
- References
- 5
- FWCI
- 13.03
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Modelling and thermodynamic properties of pure CO2 and flue gas sorption data on South African coals using Langmuir, Freundlich, Temkin, and extended Langmuir isotherm models. https://app.cochat.ai/papers/10.1007/s40789-022-00515-y
- The paper
- Mabuza, M., Premlall, K., & Daramola, M. O. (2022). Modelling and thermodynamic properties of pure CO2 and flue gas sorption data on South African coals using Langmuir, Freundlich, Temkin, and extended Langmuir isotherm models. International Journal of Coal Science & Technology. https://doi.org/10.1007/s40789-022-00515-y
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.