Designing Oxide Catalysts for Oxygen Electrocatalysis: Insights from Mechanism to Application
Open accessThe DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
The electrochemical oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are fundamental processes in a range of energy conversion devices such as fuel cells and metal–air batteries. ORR and OER both have significant activation barriers, which severely limit the overall performance of energy conversion devices that utilize ORR/OER. Meanwhile, ORR is another very important electrochemical reaction involving oxygen that has been widely investigated. ORR occurs in aqueous solutions via two pathways: the direct 4-electron reduction or 2-electron reduction pathways from O 2 to water (H 2 O) or from O 2 to hydrogen peroxide (H 2 O 2). Noble metal electrocatalysts are often used to catalyze OER and ORR, despite the fact that noble metal electrocatalysts have certain intrinsic limitations, such as low storage. Thus, it is urgent to develop more active and stable low-cost electrocatalysts, especially for severe environments (e.g., acidic media). Theoretically, an ideal oxygen electrocatalyst should provide adequate binding to oxygen species. Transition metals not belonging to the platinum group metal-based oxides are a low-cost substance that could give a d orbital for oxygen species binding. As a result, transition metal oxides are regarded as a substitute for typical precious metal oxygen electrocatalysts. However, the development of oxide catalysts for oxygen reduction and oxygen evolution reactions still faces significant challenges, e.g., catalytic activity, stability, cost, and reaction mechanism. We discuss the fundamental principles underlying the design of oxide catalysts, including the influence of crystal structure, and electronic structure on their performance. We also discuss the challenges associated with developing oxide catalysts and the potential strategies to overcome these challenges.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent Advances in Electrocatalysts for Oxygen Reduction Reaction
Shao, M., Chang, Q., Dodelet, J.-P., & Chenitz, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00462 · Cited by 3,903 · cited 1×
“Although the ORR has been extensively studied in conjunction with the creation of fuel cells, the precise reaction mechanism is still being debated [103].”
BackgroundA review on fundamentals for designing oxygen evolution electrocatalysts
Song, J., Wei, C., Huang, Z.-F., Liu, C., Zeng, L., Wang, X., & Xu, Z. J. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00607a · Cited by 2,936 · cited 4×
“…(AEM) proceeds via a sequence of concerted electron–proton transfers on the transition metal active centers, and binding of the adsorbed oxygen intermediates should be neither too strong nor too weak, leading to ( △ G O* - △ G HO* ) of 1.6 eV, according to the Sabatier’s principle [78, 96].”
BackgroundInfluentialCatalyzing the hydrogen evolution reaction (HER) with molybdenum sulfide nanomaterials
Benck, J. D., Hellstern, T. R., Kibsgaard, J., Chakthranont, P., & Jaramillo, T. F. (2014) · ACS Catalysis · doi:10.1021/cs500923c · Cited by 1,617
Strain-controlled electrocatalysis on multimetallic nanomaterials
Luo, M., & Guo, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.59 · Cited by 1,115
Recent Advances and Prospective in Ruthenium-Based Materials for Electrochemical Water Splitting
Yu, J., He, Q., Yang, G., Zhou, W., Shao, Z., & Ni, M. (2019) · ACS Catalysis · doi:10.1021/acscatal.9b02457 · Cited by 789
CoOOH Nanosheets with High Mass Activity for Water Oxidation
Huang, J., Chen, J., Yao, T., He, J., Jiang, S., Sun, Z., Liu, Q., Cheng, W., Hu, F., Jiang, Y., et al. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201502836 · Cited by 670
Kim, J., Shih, P.-C., Tsao, K.-C., Pan, Y.-T., Yin, X., Sun, C.-J., & Yang, H. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06808 · Cited by 501 · cited 1×
“…) [69–71], double perovskites (A 2 B 2 O 6 ) [72, 73], Ruddlesden–Popper perovskites (A 2 BO 4 ) [74–76], and pyrochlore-type oxides (A 2 B 2 O 7 ) [77], have gained recognition as materials for electrochemical catalysts due to the low cost of transition metals in the crystal [78], robust skeletal…”
BackgroundActivating cobalt(II) oxide nanorods for efficient electrocatalysis by strain engineering
Ling, T., Yan, D.-Y., Wang, H., Jiao, Y., Hu, Z., Zheng, Y., Zheng, L., Mao, J., Liu, H., Du, X.-W., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-01872-y · Cited by 450 · cited 1×
“Strain engineering is an effective method for modifying the metal–oxygen binding energy [39, 171, 172].”
MethodTian, Y., Wang, S., Velasco, E., Yang, Y., Cao, L., Zhang, L., Li, X., Lin, Y., Zhang, Q., & Chen, L. (2020) · iScience · doi:10.1016/j.isci.2019.100756 · Cited by 246 · cited 3×
“Also, the presence of O vacancies prevents the over-oxidation of Ru to soluble RuO 4 , which is thought to be the primary cause of the acidic instability of RuO 2 elec-trocatalysts regulated by AEM [163].”
Background
Cited by
Nsanzimana, J. M. V., Jose, V., Sk, M., Reddu, V., Xiaogang, L., Dangol, R., Hao, R., Huang, Z., Yan, Q., Thapa, R., et al. (2025) · Small · doi:10.1002/smll.202500587 · Cited by 30
Chen, Y., Li, W., Wang, Y., Wang, M., Cheng, L., Sun, L., & Yan, P. (2025) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2025.118495 · Cited by 6
Metadata
- Authors
- Han, N., Zhang, W., Guo, W., Pan, H., Jiang, B., Xing, L., Tian, H., Wang, G., Zhang, X., & Fransaer, J.
- Venue
- Nano-Micro Letters
- Published
- 2023-07-29
- Volume
- 15
- Issue
- 1
- Pages
- 185-185
- ISSN
- 2150-5551 (ISSN-L)
- 2311-6706
- OpenAlex
- W4385380176
- Cited by
- 184
- References
- 9
- FWCI
- 8.61
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Designing Oxide Catalysts for Oxygen Electrocatalysis: Insights from Mechanism to Application. https://app.cochat.ai/papers/10.1007/s40820-023-01152-z
- The paper
- Han, N., Zhang, W., Guo, W., Pan, H., Jiang, B., Xing, L., Tian, H., Wang, G., Zhang, X., & Fransaer, J. (2023). Designing Oxide Catalysts for Oxygen Electrocatalysis: Insights from Mechanism to Application. Nano-Micro Letters. https://doi.org/10.1007/s40820-023-01152-z
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.