The rate of sulfide oxidation by δMnO2 in seawater
Open accessThe DOI matches its Crossref record.
Abstract
The rate of oxidation of hydrogen sulfide by manganese dioxide in seawater was determined as a function of pH (2.0–9.0), temperature (5–45°C), and ionic strength (0–4 M). The overall rate constant, k, in seawater at pH = 8.17 was found to be first order with respect to both sulfide and manganese dioxide: −d[H2S]Tdt = k[H2S]τ[MnO2]. The rate constant, k, for seawater (S = 35.8, pH = 8.17) at 25°C was found to be 436 M−1 min−1, or 0.0244 m−2 1 min−1 when [MnO2] is expressed in surface area (m2/L). The energies of activation were found to be 14 ± 1 KJ mol−1 and 10 ± 1 KJ mol−1, respectively, for pH = 8.2 and pH = 5.0 in seawater (S = 35). The rate increased from pH 2.0 to a maximum at a pH of about 5.0 and decreased at higher pH. This pH dependence was attributed to formation of a surface complex between >MnO− and H2S. As the concentration of HS− increases above pH = 5 the rate of the reaction decreases. The rate of sulfide oxidation by MnO2 is not strongly dependent on ionic strength. The rates in 0.57 M NaCl were found to be slightly higher than the rates in seawater. Measurements made in solutions of the major sea salts indicated that Ca2+ and Mg2+ caused the rates to decrease, apparently by absorbing on the surface of manganese dioxide. Measurements made in artificial seawater (Na+, Mg2+, Ca2+, Cl−, and SO2−4) were found to be in good agreement with the measurements in actual seawater. Phosphate was found to inhibit the reaction significantly.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
The Biogeochemical Sulfur Cycle of Marine Sediments
Jørgensen, B. B., Findlay, A. J., & Pellerin, A. (2019) · Frontiers in Microbiology · doi:10.3389/fmicb.2019.00849 · Cited by 784
Bacterial Manganese and Iron Reduction in Aquatic Sediments
Thamdrup, B. (2000) · Advances in Microbial Ecology · doi:10.1007/978-1-4615-4187-5_2 · Cited by 659
Potassium ferrate(VI): an environmentally friendly oxidant
Sharma, V. K. (2002) · Advances in Environmental Research · doi:10.1016/s1093-0191(01)00119-8 · Cited by 493
Redox zonation: Equilibrium constraints on the Fe(III)/SO4-reduction interface
Postma, D., & Jakobsen, R. (1996) · Geochimica et Cosmochimica Acta · doi:10.1016/0016-7037(96)00156-1 · Cited by 454
Wang, Y., & Van Cappellen, P. (1996) · Geochimica et Cosmochimica Acta · doi:10.1016/0016-7037(96)00140-8 · Cited by 427
Metadata
- Authors
- Yao, W., & Millero, F. J.
- Venue
- Geochimica et Cosmochimica Acta
- Publisher
- Elsevier BV
- Published
- 1993-07
- Volume
- 57
- Issue
- 14
- Pages
- 3359-3365
- ISSN
- 0016-7037 (ISSN-L)
- OpenAlex
- W2050049967
- Cited by
- 125
- References
- 0
- FWCI
- 2.99
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The rate of sulfide oxidation by δMnO2 in seawater. https://app.cochat.ai/papers/10.1016/0016-7037(93)90544-7
- The paper
- Yao, W., & Millero, F. J. (1993). The rate of sulfide oxidation by δMnO2 in seawater. Geochimica et Cosmochimica Acta. https://doi.org/10.1016/0016-7037(93)90544-7
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.