The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Compressive behavior of age hardenable tetrahedral lattice truss structures made from aluminium
Abstract
Abstract Open cell, lattice truss structures have been made by folding perforated 6061 aluminium alloy sheets. Simple air brazing is used to construct sandwich panels with cellular core relative densities between 0.02 and 0.08. Some panels were quenched and aged while others were tested in an annealed condition. The measured peak compressive strengths varied from 0.7 to 20 MPa, increasing with core relative density and parent alloy yield strength. The peak strength of the annealed lattice significantly exceeds ideal-plastic predictions. A model based on inelastic column theory incorporating strain hardening was able to predict the lattice truss core's compressive peak strength capacity in both the annealed and age hardened conditions, for all relative densities tested. Comparisons with compressive strength data for other cellular metals indicate that wrought aluminium alloy tetrahedral lattice structures outperform aluminium foams and prismatic corrugations, and compare favorably with honeycombs when the strain hardening of the parent alloy is high. Their impact energy absorption can be similarly tuned and competes well with other concepts under high intensity loading conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ashby, M., Evans, A., Fleck, N., Gibson, L., Hutchinson, J., Wadley, H., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,694
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Foam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
Fabrication and structural performance of periodic cellular metal sandwich structures
Wadley, H. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00266-5 · Cited by 800
Multifunctionality of cellular metal systems
Evans, A. G. (1998) · Progress in Materials Science · doi:10.1016/s0079-6425(98)00004-8 · Cited by 737
Collapse of truss core sandwich beams in 3-point bending
Deshpande, V. S., & Fleck, N. A. (2001) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(01)00103-2 · Cited by 532
Wicks, N., & Hutchinson, J. W. (2001) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(00)00315-2 · Cited by 360
Mechanical behavior of a three-dimensional truss material
Wallach, J., & Gibson, L. J. (2001) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(00)00400-5 · Cited by 333
The effects of topology upon fluid-flow and heat-transfer within cellular copper structures
Tian, J., Kim, T., Lu, T. J., Hodson, H. P., Queheillalt, D. T., Sypeck, D. J., & Wadley, H. N. G. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.02.010 · Cited by 318
The structural performance of near-optimized truss core panels
Chiras, S., Mumm, D. R., Evans, A. G., Wicks, N., Hutchinson, J. W., Dharmasena, K. P., Wadley, H. N. G., & Fichter, S. (2002) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(02)00241-x · Cited by 307
On the performance of truss panels with Kagomé cores
Wang, J., Evans, A. G., Dharmasena, K., & Wadley, H. N. G. (2003) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(03)00349-4 · Cited by 288
Gu, S., Lu, T. J., & Evans, A. G. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00234-9 · Cited by 222
Simulated properties of Kagomé and tetragonal truss core panels
Hyun, S., Karlsson, A. M., Salvatore Torquato, A., & Evans, A. G. (2003) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(03)00350-0 · Cited by 203
Cellular Metal Truss Core Sandwich Structures
Sypeck, D. J., & Wadley, H. N. G. (2002) · Advanced Engineering Materials · doi:10.1002/1527-2648(20021014)4:10<759::aid-adem759>3.0.co;2-a · Cited by 180
Kagome plate structures for actuation
Hutchinson, R. G., Wicks, N., Evans, A. G., Fleck, N. A., & Hutchinson, J. W. (2003) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(03)00348-2 · Cited by 146
Lightweight Materials and Structures
Evans, A. G. (2001) · MRS Bulletin · doi:10.1557/mrs2001.206 · Cited by 115
The out-of-plane compressive behaviour of woven-core sandwich plates
Zupan, M., Deshpande, V. S., & Fleck, N. A. (2004) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2004.01.007 · Cited by 92
On the deformation of aluminum lattice block structures: from struts to structures
Zhou, J., Shrotriya, P., & Soboyejo, W. O. (2003) · Mechanics of Materials · doi:10.1016/j.mechmat.2003.08.007 · Cited by 91
Cited by
SLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Multifunctional periodic cellular metals
Wadley, H. N. G. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1697 · Cited by 919
Design and Optimization of Lattice Structures: A Review
Pan, C., Han, Y., & Lu, J. (2020) · Applied Sciences · doi:10.3390/app10186374 · Cited by 640
Compressive failure modes and energy absorption in additively manufactured double gyroid lattices
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., & Ashcroft, I. A. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.04.003 · Cited by 575
Khan, N., & Riccio, A. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101021 · Cited by 486
Metadata
- Authors
- KOOISTRA, G.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2004-08
- Volume
- 52
- Issue
- 14
- Pages
- 4229-4237
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2158394692
- Cited by
- 375
- References
- 18
- FWCI
- 16.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.