The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Modifying transformation pathways in high entropy alloys or complex concentrated alloys via thermo-mechanical processing
Open accessAbstract
Abstract Often the experimentally-observed, single-phase high entropy alloy (HEA) is the result of second-phase precipitation constrained by thermodynamic and kinetic factors. Using Al0.3CoCrFeNi as a candidate HEA, this paper demonstrates the strong influence of thermo-mechanical processing on the transformation pathway adopted for isothermal second-phase precipitation. A traditional thermo-mechanical processing route comprised of homogenization cold-rolling solution treatment in the single fcc phase region, followed by a precipitation anneal at a lower temperature, results in a homogeneous distribution of nanometer scale-ordered L12 (gamma prime-like) precipitates within the fcc matrix. In contrast, if cold-rolling is followed directly by annealing at the precipitation temperature, then the resulting microstructural evolution pathway changes completely, with concurrent recrystallization of the matrix fcc grains and precipitation of B2 and sigma phases, largely at the grain boundaries. These experimentally observed variations in transformation pathway have been rationalized via the competition between the thermodynamic driving force and activation barrier for second-phase nucleation in this alloy, coupled with the kinetics of the process. The microstructural variations that result from these dramatically different phase transformation pathways can lead to some rather exceptional mechanical properties that can be varied over a large range even for a single Al0.3CoCrFeNi HEA composition.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Thermo-Calc & DICTRA, computational tools for materials science
Andersson, J.-O., Helander, T., Höglund, L., Shi, P., & Sundman, B. (2002) · Calphad · doi:10.1016/s0364-5916(02)00037-8 · Cited by 4,322
The Superalloys: Fundamentals and Applications
Reed, R. C. (2008) · Cited by 3,725
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
Refractory high-entropy alloys
Senkov, O. N., Wilks, G. B., Miracle, D. B., Chuang, C. P., & Liaw, P. K. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.05.014 · Cited by 2,950
Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase
GUO, S., & LIU, C. T. (2011) · Progress in Natural Science: Materials International · doi:10.1016/s1002-0071(12)60080-x · Cited by 2,534
Recent progress in high-entropy alloys
Yeh, J.-W. (2006) · Annales de Chimie Science des Matériaux · doi:10.3166/acsm.31.633-648 · Cited by 2,117
Unit-cell refinement from powder diffraction scans
Pawley, G. S. (1981) · Journal of Applied Crystallography · doi:10.1107/s0021889881009618 · Cited by 1,965
Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
Gludovatz, B., Hohenwarter, A., Thurston, K. V. S., Bei, H., Wu, Z., George, E. P., & Ritchie, R. O. (2016) · Nature Communications · doi:10.1038/ncomms10602 · Cited by 1,930
Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Miracle, D. B., & Woodward, C. F. (2011) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.02.171 · Cited by 1,856
A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys
Lu, Y., Dong, Y., Guo, S., Jiang, L., Kang, H., Wang, T., Wen, B., Wang, Z., Jie, J., Cao, Z., et al. (2014) · Scientific Reports · doi:10.1038/srep06200 · Cited by 1,737
Hirschfelder, J. O. (1956) · Journal of the American Chemical Society · doi:10.1021/ja01599a084 · Cited by 1,237
Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties
Zhou, Y. J., Zhang, Y., Wang, Y. L., & Chen, G. L. (2007) · Applied Physics Letters · doi:10.1063/1.2734517 · Cited by 1,079
Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases
Liu, W. H., Lu, Z. P., He, J. Y., Luan, J. H., Wang, Z. J., Liu, B., Liu, Y., Chen, M. W., & Liu, C. T. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.063 · Cited by 1,064
Exploration and Development of High Entropy Alloys for Structural Applications
Miracle, D., Miller, J., Senkov, O., Woodward, C., Uchic, M., & Tiley, J. (2014) · Entropy · doi:10.3390/e16010494 · Cited by 1,012
Frenkelʹ, I. I. (1955) · Medical Entomology and Zoology · Cited by 950
Mechanical Behavior of Materials
Huda, Z. (2021) · Mechanical engineering series · doi:10.1007/978-3-030-84927-6 · Cited by 912
Mechanical performance of the Al x CoCrCuFeNi high-entropy alloy system with multiprincipal elements
Tong, C.-J., Chen, M.-R., Yeh, J.-W., Lin, S.-J., Chen, S.-K., Shun, T.-T., & Chang, S.-Y. (2005) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-005-0218-9 · Cited by 904
Accelerated exploration of multi-principal element alloys with solid solution phases
Senkov, O. N., Miller, J. D., Miracle, D. B., & Woodward, C. (2015) · Nature Communications · doi:10.1038/ncomms7529 · Cited by 871
Mechanical Behavior of Materials
(2005) · Materials Today · doi:10.1016/s1369-7021(05)71163-9 · Cited by 840
Lu, C., Niu, L., Chen, N., Jin, K., Yang, T., Xiu, P., Zhang, Y., Gao, F., Bei, H., Shi, S., et al. (2016) · Nature Communications · doi:10.1038/ncomms13564 · Cited by 822
Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys
Hemphill, M. A., Yuan, T., Wang, G. Y., Yeh, J. W., Tsai, C. W., Chuang, A., & Liaw, P. K. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.06.046 · Cited by 811
Yao, M. J., Pradeep, K. G., Tasan, C. C., & Raabe, D. (2014) · Scripta Materialia · doi:10.1016/j.scriptamat.2013.09.030 · Cited by 685
High-Entropy Alloys – A New Era of Exploitation
Yeh, J. W., Chen, Y. L., Lin, S. J., & Chen, S. K. (2007) · Materials Science Forum · doi:10.4028/www.scientific.net/msf.560.1 · Cited by 658
Chen, Y. Y., Duval, T., Hung, U. D., Yeh, J. W., & Shih, H. C. (2005) · Corrosion Science · doi:10.1016/j.corsci.2004.11.008 · Cited by 655
Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution
Hsu, Y.-J., Chiang, W.-C., & Wu, J.-K. (2005) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2005.01.001 · Cited by 655
Discovery of a Superconducting High-Entropy Alloy
Koželj, P., Vrtnik, S., Jelen, A., Jazbec, S., Jagličić, Z., Maiti, S., Feuerbacher, M., Steurer, W., & Dolinšek, J. (2014) · Physical Review Letters · doi:10.1103/physrevlett.113.107001 · Cited by 552
Li, D., Li, C., Feng, T., Zhang, Y., Sha, G., Lewandowski, J. J., Liaw, P. K., & Zhang, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.10.038 · Cited by 532
Electrical, magnetic, and Hall properties of AlxCoCrFeNi high-entropy alloys
Kao, Y.-F., Chen, S.-K., Chen, T.-J., Chu, P.-C., Yeh, J.-W., & Lin, S.-J. (2011) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2010.10.210 · Cited by 478
Nucleation in solids: The induction and steady state effects
Russell, K. C. (1980) · Advances in Colloid and Interface Science · doi:10.1016/0001-8686(80)80003-0 · Cited by 455
Microstructure and mechanical properties of multiprincipal component CoCrFeNiMox alloys
Shun, T.-T., Chang, L.-Y., & Shiu, M.-H. (2012) · Materials Characterization · doi:10.1016/j.matchar.2012.05.005 · Cited by 447
Microstructure and oxidation behavior of new refractory high entropy alloys
Liu, C. M., Wang, H. M., Zhang, S. Q., Tang, H. B., & Zhang, A. L. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.08.102 · Cited by 390
Microstructure and tensile behaviors of FCC Al0.3CoCrFeNi high entropy alloy
Shun, T.-T., & Du, Y.-C. (2008) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.12.088 · Cited by 388
Oxidation behavior of a refractory NbCrMo0.5Ta0.5TiZr alloy
Senkov, O. N., Senkova, S. V., Dimiduk, D. M., Woodward, C., & Miracle, D. B. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6582-0 · Cited by 299
Gwalani, B., Choudhuri, D., Soni, V., Ren, Y., Styles, M., Hwang, J. Y., Nam, S. J., Ryu, H., Hong, S. H., & Banerjee, R. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.053 · Cited by 206
Self-citationIrradiation Behavior in High Entropy Alloys
Xia, S.-Q., Wang, Z., Yang, T.-F., & Zhang, Y. (2015) · Journal of Iron and Steel Research International · doi:10.1016/s1006-706x(15)30084-4 · Cited by 198
Development of a novel high-entropy alloy with eminent efficiency of degrading azo dye solutions
Lv, Z. Y., Liu, X. J., Jia, B., Wang, H., Wu, Y., & Lu, Z. P. (2016) · Scientific Reports · doi:10.1038/srep34213 · Cited by 182
Strengthening in Al0.25CoCrFeNi high-entropy alloys by cold rolling
Hou, J., Zhang, M., Ma, S., Liaw, P. K., Zhang, Y., & Qiao, J. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.09.089 · Cited by 168
Jiang, L., Lu, Y., Dong, Y., Wang, T., Cao, Z., & Li, T. (2014) · Intermetallics · doi:10.1016/j.intermet.2013.08.016 · Cited by 167
Beyond Atomic Sizes and Hume-Rothery Rules: Understanding and Predicting High-Entropy Alloys
Troparevsky, M. C., Morris, J. R., Daene, M., Wang, Y., Lupini, A. R., & Stocks, G. M. (2015) · JOM · doi:10.1007/s11837-015-1594-2 · Cited by 166
Lee, C. P., Chen, Y. Y., Hsu, C., Yeh, J., & Shih, H. C. (2008) · Thin Solid Films · doi:10.1016/j.tsf.2008.06.014 · Cited by 148
Choudhuri, D., Gwalani, B., Gorsse, S., Mikler, C. V., Ramanujan, R. V., Gibson, M. A., & Banerjee, R. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.09.023 · Cited by 127
Self-citationAtomistic simulation of an f.c.c./b.c.c. interface in Ni-Cr alloys
Chen, J.-K., Farkas, D., & Reynolds, W. T. (1997) · Acta Materialia · doi:10.1016/s1359-6454(97)00159-6 · Cited by 99
Ardell, A. J. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-5395-x · Cited by 71
Phase-Field Modeling of Sigma-Phase Precipitation in 25Cr7Ni4Mo Duplex Stainless Steel
Malik, A., Odqvist, J., Höglund, L., Hertzman, S., & Ågren, J. (2017) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-017-4214-7 · Cited by 49
Cited by
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Mechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
Shi, P., Ren, W., Zheng, T., Ren, Z., Hou, X., Peng, J., Hu, P., Gao, Y., Zhong, Y., & Liaw, P. K. (2019) · Nature Communications · doi:10.1038/s41467-019-08460-2 · Cited by 954
High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties
Sathiyamoorthi, P., & Kim, H. S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100709 · Cited by 766
Shi, P., Zhong, Y., Li, Y., Ren, W., Zheng, T., Shen, Z., Yang, B., Peng, J., Hu, P., Zhang, Y., et al. (2020) · Materials Today · doi:10.1016/j.mattod.2020.09.029 · Cited by 464
Metadata
- Authors
- Gwalani, B., Gorsse, S., Choudhuri, D., Styles, M., Zheng, Y., Mishra, R. S., & Banerjee, R.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 153
- Pages
- 169-185
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2801814460
- Cited by
- 286
- References
- 50
- FWCI
- 15.83
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.