The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Phase selection motifs in High Entropy Alloys revealed through combinatorial methods: Large atomic size difference favors BCC over FCC
Open accessAbstract
High Entropy Alloys are inherently complex and span a vast composition space, making their research and discovery challenging. Developing quantitative predictions of their phase selection requires a large quantity of consistently determined experimental data. Here, we use combinatorial methods to fabricate and characterize 2478 quinary alloys based on Al and transition metals. All data are publicly available at http://materialsatlasproject.org/ . Phase selection can be predicted for considered alloys when combining the content of FCC/BCC elements and the constituents’ atomic size difference. Mining our data reveals that High Entropy Alloys with increasing atomic size difference prefer BCC structure over FCC. This preference is typically overshadowed by other selection motifs, which dominate during close-to-equilibrium processing. Not suggested by the Hume-Rothery rules, this preference originates from the ability of the BCC structure to accommodate a large atomic size difference with lower strain energy penalty which can be practically only realized in High Entropy Alloys.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Harrell, F. E. (2001) · Springer Series in Statistics · doi:10.1007/978-1-4757-3462-1 · Cited by 9,195
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
High-Entropy Alloys: A Critical Review
Tsai, M.-H., & Yeh, J.-W. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.912690 · Cited by 3,477
Solid‐Solution Phase Formation Rules for Multi‐component Alloys
Zhang, Y., Zhou, Y. J., Lin, J. P., Chen, G. L., & Liaw, P. K. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700240 · Cited by 3,466
Refractory high-entropy alloys
Senkov, O. N., Wilks, G. B., Miracle, D. B., Chuang, C. P., & Liaw, P. K. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.05.014 · Cited by 2,950
Prediction of high-entropy stabilized solid-solution in multi-component alloys
Yang, X., & Zhang, Y. (2012) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.11.021 · Cited by 2,920
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Guo, S., Ng, C., Lu, J., & Liu, C. T. (2011) · Journal of Applied Physics · doi:10.1063/1.3587228 · Cited by 2,911
Under what conditions can a glass be formed?
Turnbull, D. (1969) · Contemporary Physics · doi:10.1080/00107516908204405 · Cited by 2,229
Development and exploration of refractory high entropy alloys—A review
Senkov, O. N., Miracle, D. B., Chaput, K. J., & Couzinie, J.-P. (2018) · Journal of Materials Research · doi:10.1557/jmr.2018.153 · Cited by 1,631
Shi, Y., Yang, B., Xie, X., Brechtl, J., Dahmen, K. A., & Liaw, P. K. (2017) · Corrosion Science · doi:10.1016/j.corsci.2017.02.019 · Cited by 887
Accelerated exploration of multi-principal element alloys with solid solution phases
Senkov, O. N., Miller, J. D., Miracle, D. B., & Woodward, C. (2015) · Nature Communications · doi:10.1038/ncomms7529 · Cited by 871
Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
Zhang, Z., Mao, M. M., Wang, J., Gludovatz, B., Zhang, Z., Mao, S. X., George, E. P., Yu, Q., & Ritchie, R. O. (2015) · Nature Communications · doi:10.1038/ncomms10143 · Cited by 845
Santodonato, L. J., Zhang, Y., Feygenson, M., Parish, C. M., Gao, M. C., Weber, R. J. K., Neuefeind, J. C., Tang, Z., & Liaw, P. K. (2015) · Nature Communications · doi:10.1038/ncomms6964 · Cited by 708
Combinatorial search of thermoelastic shape-memory alloys with extremely small hysteresis width
Cui, J., Chu, Y. S., Famodu, O. O., Furuya, Y., Simpers, J. H., James, R. D., Ludwig, A., Thienhaus, S., Wuttig, M. R., Zhang, Z., et al. (2006) · Nature Materials · doi:10.1038/nmat1593 · Cited by 707
Kumar, N. A. P. K., Li, C., Leonard, K. J., Bei, H., & Zinkle, S. J. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.007 · Cited by 627
Lattice distortion in a strong and ductile refractory high-entropy alloy
Lee, C., Song, G., Gao, M. C., Feng, R., Chen, P., Brechtl, J., Chen, Y., An, K., Guo, W., Poplawsky, J. D., et al. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.053 · Cited by 622
Solidification microstructures: recent developments, future directions
Boettinger, W. J., Coriell, S. R., Greer, A. L., Karma, A., Kurz, W., Rappaz, M., & Trivedi, R. (2000) · Acta Materialia · doi:10.1016/s1359-6454(99)00287-6 · Cited by 598
Effect of the atomic size distribution on glass forming ability of amorphous metallic alloys
Senkov, O. N., & Miracle, D. B. (2001) · Materials Research Bulletin · doi:10.1016/s0025-5408(01)00715-2 · Cited by 583
Ren, F., Ward, L., Williams, T., Laws, K. J., Wolverton, C., Hattrick-Simpers, J., & Mehta, A. (2018) · Science Advances · doi:10.1126/sciadv.aaq1566 · Cited by 524
Self-citationFatigue behavior of a wrought Al0.5CoCrCuFeNi two-phase high-entropy alloy
Tang, Z., Yuan, T., Tsai, C.-W., Yeh, J.-W., Lundin, C. D., & Liaw, P. K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.004 · Cited by 450
Guidelines in predicting phase formation of high-entropy alloys
Zhang, Y., Lu, Z. P., Ma, S. G., Liaw, P. K., Tang, Z., Cheng, Y. Q., & Gao, M. C. (2014) · MRS Communications · doi:10.1557/mrc.2014.11 · Cited by 401
An understanding of high entropy alloys from phase diagram calculations
Zhang, F., Zhang, C., Chen, S. L., Zhu, J., Cao, W. S., & Kattner, U. R. (2014) · Calphad · doi:10.1016/j.calphad.2013.10.006 · Cited by 395
Computational Thermodynamics Aided High-Entropy Alloy Design
Zhang, C., Zhang, F., Chen, S., & Cao, W. (2012) · JOM · doi:10.1007/s11837-012-0365-6 · Cited by 381
Searching for Next Single-Phase High-Entropy Alloy Compositions
Gao, M., & Alman, D. (2013) · Entropy · doi:10.3390/e15104504 · Cited by 349
Entropy-driven phase stability and slow diffusion kinetics in an Al0.5CoCrCuFeNi high entropy alloy
Ng, C., Guo, S., Luan, J., Shi, S., & Liu, C. T. (2012) · Intermetallics · doi:10.1016/j.intermet.2012.07.001 · Cited by 335
Hobbs, D., Hafner, J., & Spišák, D. (2003) · Physical Review B · doi:10.1103/physrevb.68.014407 · Cited by 274
Senkov, O. N., & Miracle, D. B. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.10.279 · Cited by 261
Combinatorial development of bulk metallic glasses
Ding, S., Liu, Y., Li, Y., Liu, Z., Sohn, S., Walker, F. J., & Schroers, J. (2014) · Nature Materials · doi:10.1038/nmat3939 · Cited by 250
Self-citationLocal Atomic Structure of a High-Entropy Alloy: An X-Ray and Neutron Scattering Study
Guo, W., Dmowski, W., Noh, J.-Y., Rack, P., Liaw, P. K., & Egami, T. (2013) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1474-0 · Cited by 225
Irradiation Resistance of Multicomponent Alloys
Egami, T., Guo, W., Rack, P. D., & Nagase, T. (2014) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-013-1994-2 · Cited by 191
Ab initio investigation of high-entropy alloys of 3delements
Tian, F., Varga, L. K., Chen, N., Delczeg, L., & Vitos, L. (2013) · Physical Review B · doi:10.1103/physrevb.87.075144 · Cited by 177
Li, M., Gàzquez, J., Borisevich, A. Y., Mishra, R., & Flores, K. M. (2018) · Intermetallics · doi:10.1016/j.intermet.2018.01.021 · Cited by 158
Electronic structure of Hume-Rothery phases
Massalski, T. B., & Mizutani, U. (1978) · Progress in Materials Science · doi:10.1016/0079-6425(78)90001-4 · Cited by 156
Manzoni, A. M., Daoud, H., Mondal, S., van Smaalen, S., Völkl, R., Glatzel, U., & Wanderka, N. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.11.074 · Cited by 141
Scanning droplet cell for high throughput electrochemical and photoelectrochemical measurements
Gregoire, J. M., Xiang, C., Liu, X., Marcin, M. R., & Jin, J. (2013) · Review of Scientific Instruments · doi:10.1063/1.4790419 · Cited by 133
Miracle, D. B., Majumdar, B. S., Wertz, K. N., & Gorsse, S. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.08.001 · Cited by 126
Prediction of A2 to B2 Phase Transition in the High-Entropy Alloy Mo-Nb-Ta-W
Huhn, W., & Widom, M. (2013) · JOM · doi:10.1007/s11837-013-0772-3 · Cited by 123
Towards a greater understanding of serrated flows in an Al-containing high-entropy-based alloy
Brechtl, J. M., Chen, S. Y., Xie, X., Ren, Y., Qiao, J., Liaw, P. K., & Zinkle, S. J. (2018) · International Journal of Plasticity · doi:10.1016/j.ijplas.2018.11.011 · Cited by 122
Combinatorial development of antibacterial Zr-Cu-Al-Ag thin film metallic glasses
Liu, Y., Padmanabhan, J., Cheung, B. H., Liu, J., Chen, Z., Scanley, B. E., Wesolowski, D., Pressley, M., Broadbridge, C. C., Altman, S., et al. (2016) · Scientific Reports · doi:10.1038/srep26950 · Cited by 94
Self-citationHu, Q., Guo, S. L., Wang, J. M., Yan, Y., Chen, S., Lu, D., Liu, K. M., Zou, J., & Zeng, X. (2017) · Scientific Reports · doi:10.1038/srep39917 · Cited by 91
High entropy brasses and bronzes – Microstructure, phase evolution and properties
Laws, K. J., Crosby, C. O., Sridhar, A., Conway, P. L. J., Koloadin, L. S., Zhao, M., Aron-Dine, S., & Bassman, L. C. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.07.285 · Cited by 86
Bordeenithikasem, P., Liu, J., Kube, S. A., Li, Y., Ma, T., Scanley, B. E., Broadbridge, C. C., Vlassak, J. J., Singer, J. P., & Schroers, J. (2017) · Scientific Reports · doi:10.1038/s41598-017-07719-2 · Cited by 73
Self-citationWilson, P., Field, R., & Kaufman, M. J. (2016) · Intermetallics · doi:10.1016/j.intermet.2016.04.007 · Cited by 68
Gregoire, J. M., Dale, D. S., Kazimirov, A., DiSalvo, F. J., & Dover, R. B. V. (2009) · Review of Scientific Instruments · doi:10.1063/1.3274179 · Cited by 44
Modeling of high entropy alloys of refractory elements
del Grosso, M. F., Bozzolo, G. H., & Mosca, H. O. (2012) · Physica B Condensed Matter · doi:10.1016/j.physb.2011.12.088 · Cited by 40
Cited by
Mechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
Zhang, Y., Wen, C., Wang, C., Antonov, S., Xue, D., Bai, Y., & Su, Y. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.11.067 · Cited by 461
Sustainability through alloy design: Challenges and opportunities
Cann, J. L., De Luca, A., Dunand, D. C., Dye, D., Miracle, D. B., Oh, H. S., Olivetti, E. A., Pollock, T. M., Poole, W. J., Yang, R., et al. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100722 · Cited by 191
Metadata
- Authors
- Kube, S. A., Sohn, S., Uhl, D., Datye, A., Mehta, A., & Schroers, J.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 166
- Pages
- 677-686
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2909903914
- Cited by
- 270
- References
- 46
- FWCI
- 15.63
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.