The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Design of D022 superlattice with superior strengthening effect in high entropy alloys
Abstract
Abstract Precipitation strengthening is one of the most promising mechanisms to develop high-performance high entropy alloys (HEAs). However, the design of a reinforcing phase with an excellent strengthening effect is still one of the most pivotal challenges. In the present study, a design strategy based on overall valence electron concentration (OVEC) is developed, and a coherent D022 superlattice (noted as γ″ phase) with superior strengthening effect is designed. The newly developed γ″ phase is systematically characterized using transmission electron microscope and atom probe tomography. Differentiating from the traditional Ni3Nb γ″ phase, the present high-entropy γ″ phase contains ∼7.7% Co and follows the (Ni,Co,Cr,Fe)3(Nb,Fe) stoichiometry. Three γ″ phase variants are observed with crystallographic orientation relationships of [001]γ″// γ and (001)γ″//{100}γ. The lenticular γ″ particles with small volume fraction (7%) causes a significant yield strength increase (670 MPa) and ductility retention (40%), resulting in excellent yield strength-ductility combination. The excellent strengthening effect of the γ″ phase is attributed to both ordering strengthening and coherency strengthening. The present study proposes a new design strategy of precipitates and develops a superior reinforcing phase for HEAs. These findings will not only promote the development of precipitation-hardened HEAs but deepen the fundamentals of precipitates design for other complex concentrated alloys as well.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Guo, S., Ng, C., Lu, J., & Liu, C. T. (2011) · Journal of Applied Physics · doi:10.1063/1.3587228 · Cited by 2,911
Self-citationWu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
Yang, T., Zhao, Y. L., Tong, Y., Jiao, Z. B., Wei, J., Cai, J. X., Han, X. D., Chen, D., Hu, A., Kai, J. J., et al. (2018) · Science · doi:10.1126/science.aas8815 · Cited by 1,684
Self-citationHe, J. Y., Liu, W. H., Wang, H., Wu, Y., Liu, X. J., Nieh, T. G., & Lu, Z. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.09.037 · Cited by 1,529
Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases
Liu, W. H., Lu, Z. P., He, J. Y., Luan, J. H., Wang, Z. J., Liu, B., Liu, Y., Chen, M. W., & Liu, C. T. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.063 · Cited by 1,064
Self-citationZhao, Y. L., Yang, T., Tong, Y., Wang, J., Luan, J. H., Jiao, Z. B., Chen, D., Yang, Y., Hu, A., Liu, C. T., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.07.029 · Cited by 998
Self-citationStrengthening Mechanisms in Crystal Plasticity
Argon, A. (2007) · Oxford University Press eBooks · doi:10.1093/acprof:oso/9780198516002.001.0001 · Cited by 920
Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy
Liu, W. H., Wu, Y., He, J. Y., Nieh, T. G., & Lu, Z. P. (2013) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.12.002 · Cited by 916
Design of a twinning-induced plasticity high entropy alloy
Deng, Y., Tasan, C. C., Pradeep, K. G., Springer, H., Kostka, A., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.04.014 · Cited by 861
Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
Zhang, Z., Mao, M. M., Wang, J., Gludovatz, B., Zhang, Z., Mao, S. X., George, E. P., Yu, Q., & Ritchie, R. O. (2015) · Nature Communications · doi:10.1038/ncomms10143 · Cited by 845
Self-citationChen, Y. Y., Duval, T., Hung, U. D., Yeh, J. W., & Shih, H. C. (2005) · Corrosion Science · doi:10.1016/j.corsci.2004.11.008 · Cited by 655
The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy
Miao, J., Slone, C. E., Smith, T. M., Niu, C., Bei, H., Ghazisaeidi, M., Pharr, G. M., & Mills, M. J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.04.033 · Cited by 539
Fu, Z., Chen, W., Wen, H., Zhang, D., Chen, Z., Zheng, B., Zhou, Y., & Lavernia, E. J. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.01.050 · Cited by 501
Mechanism of Radiation Damage Reduction in Equiatomic Multicomponent Single Phase Alloys
Granberg, F., Nordlund, K., Ullah, M. W., Jin, K., Lu, C., Bei, H., Wang, L. M., Djurabekova, F., Weber, W. J., & Zhang, Y. (2016) · Physical Review Letters · doi:10.1103/physrevlett.116.135504 · Cited by 500
Jo, Y. H., Jung, S., Choi, W. M., Sohn, S. S., Kim, H. S., Lee, B. J., Kim, N. J., & Lee, S. (2017) · Nature Communications · doi:10.1038/ncomms15719 · Cited by 470
Ming, K., Bi, X., & Wang, J. (2018) · International Journal of Plasticity · doi:10.1016/j.ijplas.2017.10.005 · Cited by 330
Self-citationFeuerbacher, M., Heidelmann, M., & Thomas, C. (2015) · Materials Research Letters · doi:10.1080/21663831.2014.951493 · Cited by 308
Jiang, L., Lu, Y., Dong, Y., Wang, T., Cao, Z., & Li, T. (2014) · Intermetallics · doi:10.1016/j.intermet.2013.08.016 · Cited by 167
L12-strengthened high-entropy alloys for advanced structural applications
Yang, T., Zhao, Y., Liu, W., Kai, J., & Liu, C. (2018) · Journal of Materials Research · doi:10.1557/jmr.2018.186 · Cited by 160
Self-citationYang, T., Zhao, Y., Liu, W. H., Zhu, J., Kai, J., & Liu, C. T. (2018) · Materials Research Letters · doi:10.1080/21663831.2018.1518276 · Cited by 78
Self-citationFcc nanostructured TiFeCoNi alloy with multi-scale grains and enhanced plasticity
Fu, Z., MacDonald, B. E., Zhang, D., Wu, B., Chen, W., Ivanisenko, J., Hahn, H., & Lavernia, E. J. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.09.023 · Cited by 73
He, F., Wang, Z., Wu, Q., Chen, D., Yang, T., Li, J., Wang, J., Liu, C. T., & Kai, J. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.06.002 · Cited by 63
Self-citationHe, F., Wang, Z., Zhu, M., Li, J., Dang, Y., & Wang, J. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.174 · Cited by 40
Self-citation
Cited by
Recent Advances on High‐Entropy Alloys for 3D Printing
Han, C., Fang, Q., Shi, Y., Tor, S. B., Chua, C. K., & Zhou, K. (2020) · Advanced Materials · doi:10.1002/adma.201903855 · Cited by 486
Additive manufacturing of high entropy alloys: A practical review
Ostovari Moghaddam, A., Shaburova, N. A., Samodurova, M. N., Abdollahzadeh, A., & Trofimov, E. A. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.11.029 · Cited by 474
Nanoprecipitate‐Strengthened High‐Entropy Alloys
Liu, L., Zhang, Y., Han, J., Wang, X., Jiang, W., Liu, C., Zhang, Z., & Liaw, P. K. (2021) · Advanced Science · doi:10.1002/advs.202100870 · Cited by 393
Self-citationUncovering the eutectics design by machine learning in the Al–Co–Cr–Fe–Ni high entropy system
Wu, Q., Wang, Z., Hu, X., Zheng, T., Yang, Z., He, F., Li, J., & Wang, J. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.10.043 · Cited by 275
Self-citation
Metadata
- Authors
- He, F., Chen, D., Han, B., Wu, Q., Wang, Z., Wei, S., Wei, D., Wang, J., Liu, C. T., & Kai, J.-J.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 167
- Pages
- 275-286
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2913544741
- Cited by
- 322
- References
- 30
- FWCI
- 16.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.