The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Theory of screw dislocation strengthening in random BCC alloys from dilute to “High-Entropy” alloys
Open accessAbstract
Abstract Random body-centered-cubic (BCC) “High Entropy” alloys are a new class of alloys, some having high strength and good ductility at room temperature and some having exceptional high-temperature strength. There are no theories of strengthening of screw dislocations in BCC metals that span naturally from the dilute limit to the multi-component, non-dilute concentrations typical of the high-entropy domain. Here, such a theory is developed and validated. Unlike low-temperature elemental BCC metals and very dilute BCC alloys, strength is not controlled by the kink-pair nucleation mechanism. Rather, screw dislocations naturally adopt a kinked structure as the minimum total energy configuration in the field of random alloying atoms. The characteristic length and energy scales for the low-energy kinked screw dislocation are derived for random alloys, leading to a characteristic spacing of both kinks and cross-kinks that depends on the kink formation energy and a characteristic collective solute/screw dislocation interaction energy parameter. Glide motion of this initially-kinked screw dislocation occurs via Peierls-type motion, lateral kink glide, and failure of cross-kinks. All these features are observed in molecular dynamics simulations. The resulting strength versus temperature, strain rate, and composition is analytic. The theory is validated by comparison to experiments on non-dilute Fe-Si, Nb-Mo, Nb-W, and Ti-Nb-Zr-based high entropy alloys versus composition and temperature. The theory provides a framework for tailored design of new high-performance BCC alloys.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fast Parallel Algorithms for Short-Range Molecular Dynamics
Plimpton, S. (1995) · Journal of Computational Physics · doi:10.1006/jcph.1995.1039 · Cited by 44,721
A climbing image nudged elastic band method for finding saddle points and minimum energy paths
Henkelman, G., Uberuaga, B. P., & Jónsson, H. (2000) · The Journal of Chemical Physics · doi:10.1063/1.1329672 · Cited by 21,620
Hirth, J. P., & Lothe, J. (1968) · Medical Entomology and Zoology · Cited by 9,770
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
Refractory high-entropy alloys
Senkov, O. N., Wilks, G. B., Miracle, D. B., Chuang, C. P., & Liaw, P. K. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.05.014 · Cited by 2,950
Structural Relaxation Made Simple
Bitzek, E., Koskinen, P., Gähler, F., Moseler, M., & Gumbsch, P. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.170201 · Cited by 1,755
Development and exploration of refractory high entropy alloys—A review
Senkov, O. N., Miracle, D. B., Chaput, K. J., & Couzinie, J.-P. (2018) · Journal of Materials Research · doi:10.1557/jmr.2018.153 · Cited by 1,631
Misfit-energy-increasing dislocations in vapor-deposited CoFe/NiFe multilayers
Zhou, X. W., Johnson, R. A., & Wadley, H. N. G. (2004) · Physical Review B · doi:10.1103/physrevb.69.144113 · Cited by 1,522
Cited by
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Self-citationTailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy
Ma, E., & Wu, X. (2019) · Nature Communications · doi:10.1038/s41467-019-13311-1 · Cited by 621
Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900K
Maresca, F., & Curtin, W. A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.10.015 · Cited by 508
Self-citationYin, S., Zuo, Y., Abu-Odeh, A., Zheng, H., Li, X.-G., Ding, J., Ong, S. P., Asta, M., & Ritchie, R. O. (2021) · Nature Communications · doi:10.1038/s41467-021-25134-0 · Cited by 398
Multiplicity of dislocation pathways in a refractory multiprincipal element alloy
Wang, F., Balbus, G. H., Xu, S., Su, Y., Shin, J., Rottmann, P. F., Knipling, K. E., Stinville, J.-C., Mills, L. H., Senkov, O. N., et al. (2020) · Science · doi:10.1126/science.aba3722 · Cited by 361
Metadata
- Authors
- Maresca, F., & Curtin, W. A.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 182
- Pages
- 144-162
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2979659623
- Cited by
- 310
- References
- 30
- FWCI
- 14.38
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Theory of screw dislocation strengthening in random BCC alloys from dilute to “High-Entropy” alloys. https://app.cochat.ai/papers/10.1016/j.actamat.2019.10.007
- The paper
- Maresca, F., & Curtin, W. A. (2020). Theory of screw dislocation strengthening in random BCC alloys from dilute to “High-Entropy” alloys. Acta Materialia. https://doi.org/10.1016/j.actamat.2019.10.007
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.