The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Mechanical properties of metallic lithium: from nano to bulk scales
Open accessAbstract
Despite renewed interest in lithium metal anodes, unstable electrodeposition of Li during operation has obstructed progress in practical battery applications. While deformation mechanics likely play a key role in Li's mechanical stability as an anode material, reports of Li's mechanical properties vary widely, perhaps due to variations in testing procedures. Through bulk tensile testing and nanoindentation, we provide a comprehensive assessment of the strain-rate and length-scale dependent mechanical properties of Li in its most commonly used form: high purity commercial foil. We find that bulk Li exhibits a yield strength between 0.57 and 1.26 MPa for strain rates from 5E-4 s−1 to 5E-1 s−1. For indentation tests with target P ˙ / P = 0.05 s−1, the hardness decreases precipitously from nearly 43 MPa to 7.5 MPa as the indentation depth increases from 250 nm to 10 µm. The plastic properties measured from bulk and nanoindentation testing exhibit strong strain-rate dependencies, with stress exponents of n = 6.55 and 6.9, respectively. We implement finite element analysis to relate the indentation depth to length scales of relevance in battery applications. Overall, the results presented herein may provide important guidance in designing Li anode architectures and charging conditions to mitigate unstable growth of Li during electrochemical cycling.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Observation of Lithium Dendrites at Ambient Temperature and Below
Love, C. T., Baturina, O. A., & Swider-Lyons, K. E. (2014) · ECS Electrochemistry Letters · doi:10.1149/2.0041502eel · Cited by 166
Cited by
Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries
Krauskopf, T., Richter, F. H., Zeier, W. G., & Janek, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00431 · Cited by 892
Solid-state batteries: The critical role of mechanics
Kalnaus, S., Dudney, N. J., Westover, A. S., Herbert, E., & Hackney, S. (2023) · Science · doi:10.1126/science.abg5998 · Cited by 463
Metadata
- Authors
- Fincher, C. D., Ojeda, D., Zhang, Y., Pharr, G. M., & Pharr, M.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 186
- Pages
- 215-222
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2997286123
- Cited by
- 187
- References
- 1
- FWCI
- 5.82
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical properties of metallic lithium: from nano to bulk scales. https://app.cochat.ai/papers/10.1016/j.actamat.2019.12.036
- The paper
- Fincher, C. D., Ojeda, D., Zhang, Y., Pharr, G. M., & Pharr, M. (2020). Mechanical properties of metallic lithium: from nano to bulk scales. Acta Materialia. https://doi.org/10.1016/j.actamat.2019.12.036
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.