On the impact toughness of gradient-structured metals
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Abstract Gradient-structured (GS) materials are capable of displaying high strength without compromising ductility, which can result in damage-tolerant structures. However, due to the difficulties in fabricating bulk GS materials, there has been only limited studies on the fracture behavior in GS metals. In the present work, the impact toughness of the macroscale GS pure Ni plates was investigated using instrumented Charpy impact testing. The gradient orientation was found to have a significant influence on the impact toughness of GS Ni. For gradient structures that transition from coarse grains (CG) to nano-grains (NG), termed CG→NG gradients (in the present study from ∼8 μm to ∼30 nm), the absorbed energy and the tensile strength were increased, respectively, by 1.6 and 2.3 times from those exhibited by uniform coarse-grained structures, demonstrating a simultaneous enhancement in strength and impact toughness. Analysis of load-displacement curves revealed that the resistance to both crack initiation and propagation were significantly enhanced as the crack penetrated through the CG→NG gradient structure, leading to markedly rising dynamic R-curve behavior estimated from nonlinear-elastic fracture mechanics J-based measurements. The superior fracture resistance in the CG→NG gradient structure was found to originate from sustained ductile fracture by microvoid coalescence, taking place not only in the initial CG zone, but also within the latter NG regions where adiabatic shear bands form during impact; in these latter regions, plasticity becomes enhanced due to grain coarsening induced by recrystallization under the dynamic loading. The present work not only reveals how the dynamic fracture resistance can be significantly enhanced in GS metals, but also provides structure-design strategies for developing superior metallic materials for impact engineering applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
Self-citation
Cited by
Heterostructured materials: superior properties from hetero-zone interaction
Zhu, Y., Ameyama, K., Anderson, P. M., Beyerlein, I. J., Gao, H., Kim, H. S., Lavernia, E., Mathaudhu, S., Mughrabi, H., Ritchie, R. O., et al. (2021) · Materials Research Letters · doi:10.1080/21663831.2020.1796836 · Cited by 1,143
Self-citationRecent progress in gradient-structured metals and alloys
Ji, W., Zhou, R., Vivegananthan, P., See Wu, M., Gao, H., & Zhou, K. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101194 · Cited by 313
Metadata
- Authors
- Lin, Y., Yu, Q., Pan, J., Duan, F., Ritchie, R. O., & Li, Y.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 193
- Pages
- 125-137
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W3023779211
- Cited by
- 173
- References
- 1
- FWCI
- 5.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: On the impact toughness of gradient-structured metals. https://app.cochat.ai/papers/10.1016/j.actamat.2020.04.027
- The paper
- Lin, Y., Yu, Q., Pan, J., Duan, F., Ritchie, R. O., & Li, Y. (2020). On the impact toughness of gradient-structured metals. Acta Materialia. https://doi.org/10.1016/j.actamat.2020.04.027
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.