The DOI matches its Crossref record.
Multi-material 3D printing: The relevance of materials affinity on the boundary interface performance
Open accessAbstract
Abstract Multi-material extrusion in 3D printing is gaining attention due to a wide range of possibilities that it provides, specially driven by the commercial availability of a large variety of non-conventional filament materials. As a result, one can print models that are not limited to aesthetics purposes but can now also provide larger functionality, and therefore with mechanical performance tuned according to their purpose. With this in mind, this paper addresses the mechanical performance of multi-material printed objects, specially focused on the interface zone generated between the different materials at their geometrical boundaries. Tensile test specimens were designed and printed in three types: (A) a single-material specimen printed by a single extrusion head; (B) a single-material but multi-section specimen printed in a zebra-crossing structure by two extrusion heads; and (C) a multi-material specimen printed with two materials in a zebra-crossing pattern. The materials considered were PLA, TPU and PET. The comparison of the mechanical performance between Type-A and -B specimens demonstrated the negative influence of the presence of a geometrical boundary interface between the same material. On the other hand, the comparison between Type-B and -C demonstrated how the previous performance loss was yet more drastic when the lack of chemical affinity between the materials was present. The methodology proposed to assess the quality of the pairs of materials selected is innovative, and enabled to depict the importance of the boundary design in multi-material printing techniques.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Nazir, A., Gokcekaya, O., Md Masum Billah, K., Ertugrul, O., Jiang, J., Sun, J., & Hussain, S. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111661 · Cited by 773
Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges
Hasanov, S., Alkunte, S., Rajeshirke, M., Gupta, A., Huseynov, O., Fidan, I., Alifui-Segbaya, F., & Rennie, A. (2021) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp6010004 · Cited by 258
Raffaeli, R., Lettori, J., Schmidt, J., Peruzzini, M., & Pellicciari, M. (2021) · Applied Sciences · doi:10.3390/app11031210 · Cited by 26
Metadata
- Authors
- Lopes, L. R., Silva, A. F., & Carneiro, O. S.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 23
- Pages
- 45-52
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2843124094
- Cited by
- 211
- References
- 0
- FWCI
- 7.36
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Multi-material 3D printing: The relevance of materials affinity on the boundary interface performance. https://app.cochat.ai/papers/10.1016/j.addma.2018.06.027
- The paper
- Lopes, L. R., Silva, A. F., & Carneiro, O. S. (2018). Multi-material 3D printing: The relevance of materials affinity on the boundary interface performance. Additive Manufacturing. https://doi.org/10.1016/j.addma.2018.06.027
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.