The DOI matches its Crossref record; 99 of the 99 references it cites were found in a registry or an index.
Invited review article: Where and how 3D printing is used in teaching and education
Abstract
© 2018 Elsevier B.V. The emergence of additive manufacturing and 3D printing technologies is introducing industrial skills deficits and opportunities for new teaching practices in a range of subjects and educational settings. In response, research investigating these practices is emerging across a wide range of education disciplines, but often without reference to studies in other disciplines. Responding to this problem, this article synthesizes these dispersed bodies of research to provide a state-of-the-art literature review of where and how 3D printing is being used in the education system. Through investigating the application of 3D printing in schools, universities, libraries and special education settings, six use categories are identified and described: (1) to teach students about 3D printing; (2) to teach educators about 3D printing; (3) as a support technology during teaching; (4) to produce artefacts that aid learning; (5) to create assistive technologies; and (6) to support outreach activities. Although evidence can be found of 3D printing-based teaching practices in each of these six categories, implementation remains immature, and recommendations are made for future research and education policy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
From a literature review to a conceptual framework for sustainable supply chain management
Seuring, S., & Müller, M. (2008) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2008.04.020 · Cited by 6,341
Motivating Project-Based Learning: Sustaining the Doing, Supporting the Learning
Blumenfeld, P. C., Soloway, E., Marx, R. W., Krajcik, J. S., Guzdial, M., & Palincsar, A. (1991) · Educational Psychologist · doi:10.1080/00461520.1991.9653139 · Cited by 3,594 · cited 1×
“This is primarily being achieved through project‐based learning [170,171], in which students collaborate in groups and develop 3DP skills.”
BackgroundAdditive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Hew, K. F., & Brush, T. (2007) · Educational Technology Research and Development · doi:10.1007/s11423-006-9022-5 · Cited by 2,018
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Conducting research literature reviews: from the Internet to paper
(2005) · Choice Reviews Online · doi:10.5860/choice.42-6198 · Cited by 1,854
A conceptual framework for integrated STEM education
Kelley, T. R., & Knowles, J. G. (2016) · International Journal of STEM Education · doi:10.1186/s40594-016-0046-z · Cited by 1,832
(1985) · Cited by 1,625
3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
3D printing trends in building and construction industry: a review
Tay, Y. W. D., Panda, B., Paul, S. C., Noor Mohamed, N. A., Tan, M. J., & Leong, K. F. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1326724 · Cited by 868
The production of anatomical teaching resources using three‐dimensional (3D) printing technology
McMenamin, P. G., Quayle, M. R., McHenry, C. R., & Adams, J. W. (2014) · Anatomical Sciences Education · doi:10.1002/ase.1475 · Cited by 698
Digital Fabrication and ‘Making’ in Education: The Democratization of Invention
Blikstein, P. (2013) · FabLab · doi:10.14361/transcript.9783839423820.203 · Cited by 672
Current and emerging applications of 3D printing in medicine
Liaw, C.-Y., & Guvendiren, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7279 · Cited by 604
Unlocking value for a circular economy through 3D printing: A research agenda
Despeisse, M., Baumers, M., Brown, P., Charnley, F., Ford, S. J., Garmulewicz, A., Knowles, S., Minshall, T. H. W., Mortara, L., Reed-Tsochas, F. P., et al. (2017) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2016.09.021 · Cited by 529
Self-citationLim, K. H. A., Loo, Z. Y., Goldie, S. J., Adams, J. W., & McMenamin, P. G. (2016) · Anatomical Sciences Education · doi:10.1002/ase.1573 · Cited by 494
Additive manufacturing (AM) and nanotechnology: promises and challenges
Ivanova, O., Williams, C., & Campbell, T. (2013) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2011-0127 · Cited by 461
Open Labware: 3-D Printing Your Own Lab Equipment
Baden, T., Chagas, A. M., Gage, G., Marzullo, T., Prieto-Godino, L. L., & Euler, T. (2015) · PLOS Biology · doi:10.1371/journal.pbio.1002086 · Cited by 332
Conducting research literature reviews
Fink, A. (1998) · Cited by 319
Introduction: Project-Based Learning, Reflective Practices and Learning
DeFillippi, R. J. (2001) · Management Learning · doi:10.1177/1350507601321001 · Cited by 250
Schelly, C., Anzalone, G., Wijnen, B., & Pearce, J. M. (2015) · Journal of Visual Languages & Computing · doi:10.1016/j.jvlc.2015.01.004 · Cited by 231
Smith, C. F., Tollemache, N., Covill, D., & Johnston, M. (2018) · Anatomical Sciences Education · doi:10.1002/ase.1718 · Cited by 218
Sharing is Caring: Assistive Technology Designs on Thingiverse
Buehler, E., Branham, S., Ali, A., Chang, J. J., Hofmann, M. K., Hurst, A., & Kane, S. K. (2015) · Proceedings of the 33rd Annual ACM Conference on Human Factors in Computing Systems · doi:10.1145/2702123.2702525 · Cited by 213
Additive manufacturing management: a review and future research agenda
Khorram Niaki, M., & Nonino, F. (2017) · International Journal of Production Research · doi:10.1080/00207543.2016.1229064 · Cited by 208
Kostakis, V., Niaros, V., & Giotitsas, C. (2015) · Telematics and Informatics · doi:10.1016/j.tele.2014.05.001 · Cited by 187
3D Printing: Making Things at the Library
Hoy, M. B. (2013) · Medical Reference Services Quarterly · doi:10.1080/02763869.2013.749139 · Cited by 187
Shneiderman, B. (2008) · Science · doi:10.1126/science.1153539 · Cited by 178
Costello, J. P., Olivieri, L. J., Krieger, A., Thabit, O., Marshall, M. B., Yoo, S.-J., Kim, P. C., Jonas, R. A., & Nath, D. S. (2014) · World Journal for Pediatric and Congenital Heart Surgery · doi:10.1177/2150135114528721 · Cited by 170
3D Printing for Cultural Heritage: Preservation, Accessibility, Research and Education
Neumüller, M., Reichinger, A., Rist, F., & Kern, C. (2014) · Lecture notes in computer science · doi:10.1007/978-3-662-44630-0_9 · Cited by 163
3D printing for children: What to build next?
Eisenberg, M. (2012) · International Journal of Child-Computer Interaction · doi:10.1016/j.ijcci.2012.08.004 · Cited by 163
A review of digital manufacturing-based hybrid additive manufacturing processes
Chong, L. M., Ramakrishna, S., & Singh, S. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1345-3 · Cited by 162
(2017) · CRC Press eBooks · doi:10.1201/9781315196589 · Cited by 156
ABC and 3D: opportunities and obstacles to 3D printing in special education environments
Buehler, E., Kane, S. K., & Hurst, A. K. (2014) · International ACM SIGACCESS Conference on Computers and Accessibility (ASSETS) · doi:10.1145/2661334.2661365 · Cited by 154
Mogali, S. R., Yeong, W. Y., Tan, H. K. J., Tan, G. J. S., Abrahams, P., Zary, N., Low‐Beer, N., & Ferenczi, M. A. (2017) · Anatomical Sciences Education · doi:10.1002/ase.1703 · Cited by 152
Hands On, Hands Off: Gendered Access in Crafting and Electronics Practices
Buchholz, B. A., Shively, K., Peppler, K., & Wohlwend, K. E. (2014) · Mind Culture and Activity · doi:10.1080/10749039.2014.939762 · Cited by 147
Investigating the Implications of 3D Printing in Special Education
Buehler, E., Comrie, N., Hofmann, M. K., McDonald, S., & Hurst, A. K. (2016) · ACM Transactions on Accessible Computing · doi:10.1145/2870640 · Cited by 142
Makers in the library: case studies of 3D printers and maker spaces in library settings
Moorefield-Lang, H. M. (2014) · Library Hi Tech · doi:10.1108/lht-06-2014-0056 · Cited by 124
An Assessment Instrument of Technological Literacies in Makerspaces and FabLabs
Blikstein, P., Kabayadondo, Z., Martin, A., & Fields, D. (2017) · Journal of Engineering Education · doi:10.1002/jee.20156 · Cited by 119 · cited 2×
“While the majority of such makerspaces are being created within libraries, there are also numerous instances of makerspaces being established independently of libraries [149,150].”
BackgroundKane, S. K., & Bigham, J. P. (2014) · ACM Technical Symposium on Computer Science Education (SIGCSE) · doi:10.1145/2538862.2538975 · Cited by 113
Use of 3D models of congenital heart disease as an education tool for cardiac nurses
Biglino, G., Capelli, C., Koniordou, D., Robertshaw, D., Leaver, L.-K., Schievano, S., Taylor, A. M., & Wray, J. (2016) · Congenital Heart Disease · doi:10.1111/chd.12414 · Cited by 113
3D printed simulation models based on real patient situations for hands‐on practice
Kröger, E., Dekiff, M., & Dirksen, D. (2016) · European Journal Of Dental Education · doi:10.1111/eje.12229 · Cited by 106
3D printed tactile picture books for children with visual impairments: a design probe
Stangl, A. J., Kim, J., & YEH, T. P. (2014) · ACM International Conference on Interaction Design and Children (IDC) · doi:10.1145/2593968.2610482 · Cited by 99
Buehler, E., Hurst, A. K., & Hofmann, M. K. (2014) · doi:10.1145/2661334.2661345 · Cited by 98
Making the best of it? Exploring the realities of 3D printing in school
Nemorin, S., & Selwyn, N. (2016) · Research Papers in Education · doi:10.1080/02671522.2016.1225802 · Cited by 91
The NIH 3D Print Exchange: A Public Resource for Bioscientific and Biomedical 3D Prints
Coakley, M. F., Hurt, D. E., Weber, N. D., Mtingwa, M., Fincher, E. C., Alekseyev, V., Chen, D. T., Yun, A., Gizaw, M., Swan, J., et al. (2014) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2014.1503 · Cited by 90
A New Open Source 3D-Printable Mobile Robotic Platform for Education
González-Gómez, J., Valero, A., Prieto-Moreno, A., & Abderrahim, M. (2012) · Springer eBooks · doi:10.1007/978-3-642-27482-4_8 · Cited by 86
Helping Hands: Requirements for a Prototyping Methodology for Upper-limb Prosthetics Users
Hofmann, M. K., Harris, J., Hudson, S. E., & Mankoff, J. C. (2016) · CHI Conference on Human Factors in Computing Systems · doi:10.1145/2858036.2858340 · Cited by 81
Digital Fabrication Laboratories: Pedagogy and Impacts on Architectural Education
Celani, G. (2012) · Nexus Network Journal · doi:10.1007/s00004-012-0120-x · Cited by 71
Telegenov, K., Tlegenov, Y., & Shintemirov, A. (2015) · IEEE Access · doi:10.1109/access.2015.2433937 · Cited by 70
Fourie, I., & Meyer, A. (2015) · Library Hi Tech · doi:10.1108/lht-09-2015-0092 · Cited by 69
The frustrations of digital fabrication: an auto/ethnographic exploration of ‘3D Making’ in school
Nemorin, S. (2016) · International Journal of Technology and Design Education · doi:10.1007/s10798-016-9366-z · Cited by 65
Poppy Project: Open-Source Fabrication of 3D Printed Humanoid Robot for Science, Education and Art
Lapeyre, M., Rouanet, P., Grizou, J., N’Guyen, S., Depraetre, F., Falher, A. L., & Oudeyer, P.-Y. (2014) · HAL · Cited by 63
Buehler, E., Easley, W., McDonald, S., Comrie, N., & Hurst, A. K. (2015) · International ACM SIGACCESS Conference on Computers and Accessibility (ASSETS) · doi:10.1145/2700648.2809844 · Cited by 63
Rapid Prototyping and 3D‐Virtual Models for Operative Dentistry Education in Brazil
Soares, P. V., Milito, G. D. A., Pereira, F. A., Reis, B. R., Soares, C. J., Menezes, M. D. S., & Santos‐Filho, P. C. F. (2013) · Journal of Dental Education · doi:10.1002/j.0022-0337.2013.77.3.tb05479.x · Cited by 61
Impact of additive manufacturing on engineering education – evidence from Italy
Minetola, P., Iuliano, L., Bassoli, E., & Gatto, A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-09-2014-0123 · Cited by 60
Kaliakin, D. S., Zaari, R. R., & Varganov, S. A. (2015) · Journal of Chemical Education · doi:10.1021/acs.jchemed.5b00409 · Cited by 60
Design for Additive Manufacturing Curriculum: A Problem- and Project-Based Approach
Williams, C. B., & Seepersad, C. C. (2012) · doi:10.26153/tsw/15334 · Cited by 57
Introduction of 3D Printing Technology in the Classroom for Visually Impaired Students
Wonjin, J., Jang, H. I., Harianto, R. A., So, J. H., Lee, H., Lee, H. J., & Moon, M. (2016) · Journal of Visual Impairment & Blindness · doi:10.1177/0145482x1611000205 · Cited by 57
Penny, M. R., Cao, Z. J., Patel, B., Sil, B. C., Asquith, C. R. M., Szulc, B. R., Rao, Z. X., Muwaffak, Z., Malkinson, J. P., & Hilton, S. T. (2017) · Journal of Chemical Education · doi:10.1021/acs.jchemed.6b00953 · Cited by 57
3-D FOSSILS FOR K–12 EDUCATION: A CASE EXAMPLE USING THE GIANT EXTINCT SHARKCARCHAROCLES MEGALODON
Grant, C., MacFadden, B. J., Antonenko, P., & Pérez, V. J. V. (2016) · The Paleontological Society Papers · doi:10.1017/scs.2017.15 · Cited by 55
3-D printed haptic devices for educational applications
Martinez, M. O., Morimoto, T. K., Taylor, A., Barron, A. C., Pultorak, J. D. A., Wang, J., Calasanz-Kaiser, A., Davis, R. L., Blikstein, P., & Okamura, A. M. (2016) · IEEE Haptics Symposium · doi:10.1109/haptics.2016.7463166 · Cited by 54
3D printing technology as innovative tool for math and geometry teaching applications
Huleihil, M. M. (2017) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/164/1/012023 · Cited by 52
3D Modeling and Printing in History/Social Studies Classrooms: Initial Lessons and Insights
Maloy, R. W., Torrey Trust, Kommers, S., Malinowski, A., & LaRoche, I. S. (2017) · Contemporary issues in technology and teacher education · Cited by 52
Design and evaluation of a DIY construction system for educational robot kits
Vandevelde, C., wyffels, F., Ciocci, M.-C., Vanderborght, B., & Saldien, J. (2015) · International Journal of Technology and Design Education · doi:10.1007/s10798-015-9324-1 · Cited by 44
3D Printing in the Chemistry Curriculum: Inspiring Millennial Students To Be Creative Innovators
Violante, L. E. H., Nuñez, D., Ryan, S., & Grubbs, W. T. (2014) · ACS symposium series · doi:10.1021/bk-2014-1180.ch009 · Cited by 44
Low-cost Printable Robots in Education
Armesto, L., Fuentes-Durá, P., & Perry, D. R. (2015) · Journal of Intelligent & Robotic Systems · doi:10.1007/s10846-015-0199-x · Cited by 39
Advances in Autonomous Mini Robots
Rückert, U., Sitte, J., & Werner, F. (2012) · Springer eBooks · doi:10.1007/978-3-642-27482-4 · Cited by 38
Advancing Children’s Engineering Through Desktop Manufacturing
Bull, G., Chiu, J. L., Berry, R., Lipson, H., & Xie, C. (2014) · Springer eBooks · doi:10.1007/978-1-4614-3185-5_54 · Cited by 37
Makers on the move: a mobile makerspace at a comprehensive public high school
Craddock, I. (2015) · Library Hi Tech · doi:10.1108/lht-05-2015-0056 · Cited by 36
3D Printed Block Copolymer Nanostructures
Scalfani, V. F., Turner, C. H., Rupar, P. A., Jenkins, A. H., & Bara, J. E. (2015) · Journal of Chemical Education · doi:10.1021/acs.jchemed.5b00375 · Cited by 35
3D Printed Tactile Learning Objects: Proof of Concept
Kolitsky, M. A. (2014) · Journal of Blindness Innovation and Research · doi:10.5241/4-51 · Cited by 35
Integrating 3D printing into an early childhood teacher preparation course: Reflections on practice
Sullivan, P. M., & McCartney, H. B. (2017) · Journal of Early Childhood Teacher Education · doi:10.1080/10901027.2016.1274694 · Cited by 33
Stone‐Sundberg, J. L., Kaminsky, W., Snyder, T. J., & Moeck, P. (2015) · Crystal Research and Technology · doi:10.1002/crat.201400469 · Cited by 32
Teaching Computational Thinking by Playing Games and Building Robots
Roscoe, J. F., Fearn, S., & Posey, E. (2014) · International Conference on Interactive Technologies and Games (ITAG) · doi:10.1109/itag.2014.15 · Cited by 32
Applications for advanced 3D imaging, modelling, and printing techniques for the biological sciences
Keaveney, S., Keogh, C., Gutierrez-Heredia, L., & Reynaud, E. G. (2016) · International Conference on Virtual Systems and Multimedia (VSMM) · doi:10.1109/vsmm.2016.7863157 · Cited by 32
Refocusing mobile makerspace outreach efforts internally as professional development
Purpur, E., Radniecki, T., Colegrove, T., et al. (2016) · Library Hi Tech · doi:10.1108/lht-07-2015-0077 · Cited by 31
From physical to digital in structural engineering classrooms using digital fabrication
Chacón, R., Codony, D., & Toledo, Á. (2017) · Computer Applications in Engineering Education · doi:10.1002/cae.21845 · Cited by 27
Bagley, J. R., & Galpin, A. J. (2015) · Biochemistry and Molecular Biology Education · doi:10.1002/bmb.20891 · Cited by 26
Collaborative use of different learning styles through 3D printing
Fernandes, S. C. F., & Simões, R. (2016) · International Conference of the Portuguese Society for Engineering Education (CISPEE) · doi:10.1109/cispee.2016.7777742 · Cited by 26
Grice, N., Christian, C. A., Nota, A., et al. (2015) · Journal of Blindness Innovation and Research · doi:10.5241/5-66 · Cited by 24
Using Digital Fabrication to Support Student Learning
Corum, K., & Garofalo, J. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0008 · Cited by 24
Planning and Implementing a 3D Printing Service in an Academic Library.
Gonzalez, S., & Bennett, D. B. (2014) · Issues in Science and Technology Librarianship · doi:10.29173/istl1619 · Cited by 24
Hall, S., Grant, G. D., Arora, D. S., Karaksha, A., McFarland, A. J., Lohning, A. E., & Anoopkumar‐Dukie, S. (2017) · Currents in Pharmacy Teaching and Learning · doi:10.1016/j.cptl.2017.03.029 · Cited by 24
Supporting 3D modeling in the academic library
Radniecki, T. (2017) · Library Hi Tech · doi:10.1108/lht-11-2016-0121 · Cited by 24
The advantages of 3D printing in undergraduate mechanical engineering research
Pieterse, F., & Nel, A. (2016) · IEEE Global Engineering Education Conference (EDUCON) · doi:10.1109/educon.2016.7474526 · Cited by 18
Teaching Robotics Software With the Open Hardware Mobile Manipulator
Vona, M. A., & Shekar, N. H. (2012) · IEEE Transactions on Education · doi:10.1109/te.2012.2218657 · Cited by 15
3D technology in libraries: Applications for teaching and research
Bharti, N., Gonzalez, S., & Buhler, A. (2015) · International Symposium on Emerging Trends and Technologies in Libraries and Information Services (ETTLIS) · doi:10.1109/ettlis.2015.7048191 · Cited by 14
Integrating a 3-D Printer and a Truss Optimization Project in Statics
Brake, N. A., & Adam, F. (2016) · ASEE Annual Conference & Exposition · doi:10.18260/p.25776 · Cited by 10
Printable creativity in plastic valley UC3M
Valero, A., González-Gómez, J., González-Pacheco, V., & Salichs, M. A. (2012) · IEEE Global Engineering Education Conference (EDUCON) · doi:10.1109/educon.2012.6201151 · Cited by 9
A New Framework of Science and Technology Innovation Education for K-12 in Qingdao, China
Liu, X., Gong, X., Wang, F., Rui, S., Gao, Y., Zhang, Y., Zhou, J., & Deng, X. (2024) · ASEE International Forum · doi:10.18260/1-2--29271 · Cited by 9
A Robotics-Based 3D Modeling Curriculum for K-12 Education
Montironi, M. A., Eliahu, D. S., & Cheng, H. H. (2015) · ASEE Annual Conference and Exposition · doi:10.18260/p.23443 · Cited by 8
Bilén, S. G., Wheeler, T., & Bock, R. G. (2015) · ASEE Annual Conference & Exposition · doi:10.18260/p.24448 · Cited by 8
Friess, A., Martin, E., Esparragoza, I. E., & Lawanto, O. (2016) · ASEE Annual Conference & Exposition · doi:10.18260/p.25608 · Cited by 7
3D Printed Custom Orthotic Device Development: A Student-driven Project
Krivoniak, A., & Şirinterlikçi, A. (2018) · ASEE Annual Conference & Exposition · doi:10.18260/1-2--27436 · Cited by 7
Kitts, C., & Mahacek, A. (2018) · ASEE Annual Conference & Exposition · doi:10.18260/1-2--29011 · Cited by 5
Board #59: Lessons Learned Creating Youth Jobs in an Afterschool Maker Space
Hurst, A. K., Grimes, S., McCoy, D., Carter, N., Easley, W., Hamidi, F., & Salib, G. (2018) · ASEE Annual Conference & Exposition · doi:10.18260/1-2--27972 · Cited by 5
Development of a Laboratory Module in 3D Printing
Kim, S. (2018) · ASEE Annual Conference & Exposition · doi:10.18260/1-2--28160 · Cited by 4
Preparing to Use Rapid Prototyping: Lessons Learned from Design and Manufacturing Projects
Wan, H.-D., & Syed, F. (2020) · ASEE Annual Conference & Exposition · doi:10.18260/1-2--21820 · Cited by 3
Self-evaluation of Design Decision-making Skills Gained Through Student Generated Learning Aids
Jensen, D. C., & Beck, D. E. (2015) · ASEE Annual Conference & Exposition · doi:10.18260/p.24700 · Cited by 3
Digital Prototyping by Multidisciplinary Teams
Leake, J., Weightman, D., & Batmunkh, B. (2018) · ASEE Annual Conference & Exposition · doi:10.18260/1-2--28181 · Cited by 2
Cited by
Mhlongo, S., Mbatha, K., Ramatsetse, B., & Dlamini, R. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e16348 · Cited by 337
“These technologies, which include the IoT [62,63], 3D printing [64,65], big data [66–68], blockchain [69,70], AI [71,72], virtual reality (AR), augmented reality (VR), and mixed reality (MR) [73–78], as well as virtual conferencing [79–81], are speedily finding applications in the next generation of…”
Educational experiences with Generation Z
Hernandez-de-Menendez, M., Escobar Díaz, C. A., & Morales-Menendez, R. (2020) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-020-00674-9 · Cited by 273
Metadata
- Authors
- Ford, S., & Minshall, T.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 25
- Pages
- 131-150
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2898205838
- Cited by
- 421
- References
- 99
- FWCI
- 19.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.