The DOI matches its Crossref record.
Effect of density and unit cell size grading on the stiffness and energy absorption of short fibre-reinforced functionally graded lattice structures
Open accessAbstract
Abstract Architectured structures, particularly functionally graded lattices, are receiving much attention in both industry and academia as they facilitate the customization of the structural response and harness the potential for multi-functional applications. This work experimentally investigates how the severity of density and unit cell size grading as well as the building direction affects the stiffness, energy absorption and structural response of additively manufactured (AM) short fibre-reinforced lattices with same relative density. Specimens composed of tessellated body-centred cubic (BCC), Schwarz-P (SP) and Gyroid (GY) unit cells were tested under compression. Compared to the uniform lattices of equal density, it was found, that modest density grading has a positive and no effect on the total compressive stiffness of SP and BCC lattices, respectively. More severe grading gradually reduces the total stiffness, with the modulus of the SP lattices never dropping below that of the uniform counterparts. Unit cell size grading had no significant influence on the stiffness and revealed an elastomer-like performance as opposed to the density graded lattices of the same relative density, suggesting a foam-like behaviour. Density grading of bending-dominated unit cell lattices showcased better energy absorption capability for small displacements, whereas grading of the stretching-dominated counterparts is advantageous for large displacements when compared to the ungraded lattice. The severity of unit cell size graded lattices does not affect the energy absorption capability. Finally, a power-law approach was used to semi-empirically derive a formula that predicts the cumulative energy absorption as a function of the density gradient and relative density. Overall, these findings will provide engineers with valuable knowledge that will ease the design choices for lightweight multi-functional AM-parts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Feng, J., Fu, J., Yao, X., & He, Y. (2022) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ac5be6 · Cited by 813
Khan, N., & Riccio, A. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101021 · Cited by 486
Wu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
Experimental and numerical studies on mechanical properties of TPMS structures
Qiu, N., Wan, Y., Shen, Y., & Fang, J. (2024) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108657 · Cited by 290
Ahmed, R., Dola, I. S., Ahmed, S., Rahman, M. M., Shanto, T. A., & Taylor, R. (2026) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-026-18078-6 · Cited by 6
Metadata
- Authors
- Plocher, J., & Panesar, A.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2020-05
- Volume
- 33
- Pages
- 101171
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W3012261978
- Cited by
- 196
- References
- 0
- FWCI
- 13.47
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of density and unit cell size grading on the stiffness and energy absorption of short fibre-reinforced functionally graded lattice structures. https://app.cochat.ai/papers/10.1016/j.addma.2020.101171
- The paper
- Plocher, J., & Panesar, A. (2020). Effect of density and unit cell size grading on the stiffness and energy absorption of short fibre-reinforced functionally graded lattice structures. Additive Manufacturing. https://doi.org/10.1016/j.addma.2020.101171
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.