The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Mechanical properties of additively manufactured metal lattice structures: Data review and design interface
Abstract
Abstract With the ever-increasing resolution of metal additive manufacturing processes, the ability to design and fabricate cellular or lattice structures is readily improving. While there are few limits to the variety of unit cell topologies that can feasibly be manufactured, there is little known about the effect that the underlying unit cell topology has on lattice structure mechanical performance. Increased knowledge of lattice structure performance based on the unit cell topology can aid in appropriate unit cell selection to achieve desired lattice structure mechanical properties. The objective in this work is to compile metal additively manufactured lattice structure characterization data found in the literature into Ashby-style plots that can be used to differentiate unit cell topologies and guide unit cell selection. Data gathered from literature encompasses over 69 papers describing 18 different unit cell topologies. Data on mechanical properties such as the effective modulus, Poisson’s ratio, yield strength, buckling strength, and plateau strength, of lattice structures from analytical models based on mathematical derivations, finite element analysis, and experimental characterization was gathered and synthesized. In total, nearly 1650 data points for experimental and finite element analysis were compiled along with a variety of analytical models for 18 different unit cell topologies. The process of gathering the data from the literature along with the assumptions used to compile the data are discussed. A graphical user interface and database were developed that allows for comparison of different lattice structure mechanical properties based on their unit cell topology. The Lattice Unit-cell Characterization Interface for Engineers (LUCIE) provides a simple format to guide engineers, scientists, and others towards understanding the relationships of the unit cell topology and the lattice structure mechanical properties, with the intent of guiding appropriate unit cell selection. Three cases studies are shown for using LUCIE to differentiate unit cell topologies for improved understanding of experimental and simulation-based results (Case Study 1), to identify unit cell topology options for reducing weight while maintaining yield stress or increasing yield stress without reducing weight (Case Study 2), and for quickly narrowing multiple options to an appropriate unit cell topology (Case Study 3).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
SLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Intercoder Reliability and Validity of WebPlotDigitizer in Extracting Graphed Data
Drevon, D., Fursa, S. R., & Malcolm, A. L. (2017) · Behavior Modification · doi:10.1177/0145445516673998 · Cited by 1,006
Yan, C., Hao, L., Hussein, A., Young, P., & Raymont, D. (2014) · Materials & Design · doi:10.1016/j.matdes.2013.10.027 · Cited by 622
Cited by
Feng, J., Fu, J., Yao, X., & He, Y. (2022) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ac5be6 · Cited by 813
Powder Bed Fusion of nickel-based superalloys: A review
Sanchez, S., Smith, P., Xu, Z., Gaspard, G., Hyde, C. J., Wits, W. W., Ashcroft, I. A., Chen, H., & Clare, A. T. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103729 · Cited by 541
Khan, N., & Riccio, A. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101021 · Cited by 486
Wu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
Metadata
- Authors
- Hanks, B., Berthel, J., Frecker, M., & Simpson, T. W.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 35
- Pages
- 101301
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W3024763397
- Cited by
- 178
- References
- 3
- FWCI
- 9.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical properties of additively manufactured metal lattice structures: Data review and design interface. https://app.cochat.ai/papers/10.1016/j.addma.2020.101301
- The paper
- Hanks, B., Berthel, J., Frecker, M., & Simpson, T. W. (2020). Mechanical properties of additively manufactured metal lattice structures: Data review and design interface. Additive Manufacturing. https://doi.org/10.1016/j.addma.2020.101301
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.