The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Defect structure process maps for laser powder bed fusion additive manufacturing
Open accessAbstract
Accurate detection, characterization, and prediction of defects has great potential for immediate impact in the production of fully-dense and defect free metal additive manufacturing (AM) builds. Accordingly, this paper presents Defect Structure Process Maps (DSPMs) as a means of quantifying the role of porosity as an exemplary defect structure in powder bed printed materials. Synchrotron-based micro-computed tomography (μSXCT) was used to demonstrate that metal AM defects follow predictable trends within processing parameter space for laser powder bed fusion (LPBF) materials. Ti-6Al-4 V test blocks were fabricated on an EOS M290 utilizing variations in laser power, scan velocity, and hatch spacing. In general, characteristic under-melting or lack-of-fusion defects were discovered in the low laser power, high scan velocity region of process space via μSXCT. These defects were associated with insufficient overlap between adjacent melt tracks and can be avoided through the application of a lack-of-fusion criterion using melt pool geometric modeling. Large-scale keyhole defects were also successfully mitigated for estimated melt pool morphologies associated with shallow keyhole front wall angles. Process variable selections resulting in deep keyholes, i.e., high laser power and low scan velocity, exhibit a substantial increase of spherical porosity as compared to the nominal (manufacturer recommended) processing parameters for Ti-6Al-4 V. Defects within fully-dense process space were also discovered, and are associated with gas porosity transfer to the AM test blocks during the laser-powder interaction. Overall, this work points to the fact that large-scale defects in LPBF materials can be successfully predicted and thus mitigated/minimized via appropriate selection of processing parameters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
ImageJ2: ImageJ for the next generation of scientific image data
Rueden, C. T., Schindelin, J., Hiner, M. C., DeZonia, B. E., Walter, A. E., Arena, E. T., & Eliceiri, K. W. (2017) · BMC Bioinformatics · doi:10.1186/s12859-017-1934-z · Cited by 5,980
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
King, W. E., Barth, H. D., Castillo, V. M., Gallegos, G. F., Gibbs, J. W., Hahn, D. E., Kamath, C., & Rubenchik, A. M. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.06.005 · Cited by 1,616
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.11.011 · Cited by 1,475
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Ilastik: Interactive learning and segmentation toolkit
Sommer, C., Straehle, C., Kothe, U., & Hamprecht, F. A. (2011) · 2011 IEEE International Symposium on Biomedical Imaging: From Nano to Macro · doi:10.1109/isbi.2011.5872394 · Cited by 1,125
Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
Cunningham, R., Zhao, C., Parab, N., Kantzos, C., Pauza, J., Fezzaa, K., Sun, T., & Rollett, A. D. (2019) · Science · doi:10.1126/science.aav4687 · Cited by 1,066
Self-citationGong, H., Rafi, K., Gu, H., Starr, T., & Stucker, B. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.002 · Cited by 1,038
Cited by
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Self-citationMukherjee, T., Elmer, J. W., Wei, H. L., Lienert, T. J., Zhang, W., Kou, S., & DebRoy, T. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101153 · Cited by 267
Ultrafast Laser Additive Manufacturing: A Review
Saunders, J., Elbestawi, M., & Fang, Q. (2023) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp7030089 · Cited by 35
Metadata
- Authors
- Gordon, J. V., Narra, S. P., Cunningham, R. W., Liu, H., Chen, H., Suter, R. M., Beuth, J. L., & Rollett, A. D.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 36
- Pages
- 101552
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W3080402790
- Cited by
- 329
- References
- 37
- FWCI
- 16.53
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Defect structure process maps for laser powder bed fusion additive manufacturing. https://app.cochat.ai/papers/10.1016/j.addma.2020.101552
- The paper
- Gordon, J. V., Narra, S. P., Cunningham, R. W., Liu, H., Chen, H., Suter, R. M., Beuth, J. L., & Rollett, A. D. (2020). Defect structure process maps for laser powder bed fusion additive manufacturing. Additive Manufacturing. https://doi.org/10.1016/j.addma.2020.101552
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.