The DOI matches its Crossref record; 123 of the 123 references it cites were found in a registry or an index.
About metastable cellular structure in additively manufactured austenitic stainless steels
Abstract
Abstract The quick-emerging paradigm of additive manufacturing technology has revealed salient advantages in enabling the tailored-design of structural components with more exceptional performances over ordinary subtractive processing routines. As a peculiar feature, sub-micro cellular structures widely exist in additively manufactured (AM) metallic materials. This phenomenon primarily appears with high-density dislocations and segregated elements or precipitates at the cellular boundaries. The discovery of novel metastable substructures in various alloys through numerous investigations has proven their substantial effects on the engineering properties of AM components. This paper reviews the most recent research momentum regarding the formation mechanisms (elemental segregation, dislocation cell and oxide inclusion), the kinetics of the size and morphology, the growth orientation and the thermodynamic stability of these cellular structures by taking AM austenitic stainless steel as an exemplary material. Another topic of concern here is the inherent correlation between the unique cellular microstructure and the corresponding mechanical properties (strength, ductility, fatigue, etc.) and corrosion responses (passivity, irradiation damage, hydrogen embrittlement, etc.) for this category of AM materials. The design, control, and optimization of cellular structures for additive manufacturing techniques are expected to inspire new strategies for advancing high-performance structural alloy development.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Christian, J. W., & Mahajan, S. (1995) · Progress in Materials Science · doi:10.1016/0079-6425(94)00007-7 · Cited by 3,603
Flemings, M. C. (1974) · Metallurgical transactions · doi:10.1007/bf02643923 · Cited by 3,403
Physics and phenomenology of strain hardening: the FCC case
Kocks, U. F., & Mecking, H. (2003) · Progress in Materials Science · doi:10.1016/s0079-6425(02)00003-8 · Cited by 3,286
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
Plastic deformation in metallic glasses
Argon, A. S. (1979) · Acta Metallurgica · doi:10.1016/0001-6160(79)90055-5 · Cited by 2,720
Additively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Metadata
- Authors
- Kong, D., Dong, C., Wei, S., Ni, X., Zhang, L., Li, R., Wang, L., Man, C., & Li, X.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 38
- Pages
- 101804
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W3113637989
- Cited by
- 528
- References
- 123
- FWCI
- 26.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: About metastable cellular structure in additively manufactured austenitic stainless steels. https://app.cochat.ai/papers/10.1016/j.addma.2020.101804
- The paper
- Kong, D., Dong, C., Wei, S., Ni, X., Zhang, L., Li, R., Wang, L., Man, C., & Li, X. (2021). About metastable cellular structure in additively manufactured austenitic stainless steels. Additive Manufacturing. https://doi.org/10.1016/j.addma.2020.101804
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
