Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 195

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Laser-based powder bed fusion additive manufacturing of pure copper

Open access
Jadhav, Suraj Dinkar, Goossens, Louca Raphaël, Kinds, Yannis, Hooreweder, Brecht Van, Vanmeensel, Kim · 2021 · Additive Manufacturing

Abstract

In this article, the laser-based powder bed fusion (L-PBF) processing behavior of pure copper powder is evaluated by employing a conventional infrared fiber laser with a wavelength of 1080 nm, a small focal spot diameter of 37.5 µm, and power levels up to 500 W. It is shown that bulk solid copper parts with near full density (ρ Archimedes = 99.3 ± 0.2%, ρ Optical = 99.8 ± 0.1%) can be produced using a laser power of 500 W for the chosen combination of powder particle size, L-PBF settings, and pure copper baseplate. Moreover, at 500 W, parts with a relative density exceeding 99% are manufactured within a volumetric energy density window of 230 - 310 J/mm3, while laser power levels below 500 W did not produce parts with a relative density above 99%. An analytical model is used to elucidate the L-PBF processing behavior, wherein both conduction and keyhole regimes corresponding to the employed L-PBF settings are identified. The analytical model-based results predict that the bulk solid copper parts with near full density are produced in a keyhole regime prior to the onset of keyhole-induced porosity, which is in accordance with the porosity types observed in the parts. The L-PBF fabricated copper parts exhibit an electrical conductivity of 94 ± 1% compared to the international annealed copper standard (IACS) and demonstrate a tensile strength of 211 ± 4 MPa, a yield strength of 122 ± 1 MPa, and an elongation at break of 43 ± 3% in the as-built condition.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.addma.2021.101990

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 2 references

Cited by

See all 195

Metadata

Authors
Jadhav, S. D., Goossens, L. R., Kinds, Y., Hooreweder, B. V., & Vanmeensel, K.
Venue
Additive Manufacturing
Publisher
Elsevier BV
Published
2021-06
Volume
42
Pages
101990
ISSN
  • 2214-7810 (ISSN-L)
  • 2214-8604
OpenAlex
W3139830709
Cited by
195
References
2
FWCI
13.20
Type
journal article
Language
en
Open access
green

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Laser-based powder bed fusion additive manufacturing of pure copper. https://app.cochat.ai/papers/10.1016/j.addma.2021.101990
The paper
Jadhav, S. D., Goossens, L. R., Kinds, Y., Hooreweder, B. V., & Vanmeensel, K. (2021). Laser-based powder bed fusion additive manufacturing of pure copper. Additive Manufacturing. https://doi.org/10.1016/j.addma.2021.101990

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.